Aircraft

A complete replacement fuselage for the Durafly Auto-G2 V2 Gyrocopter with decal.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement horizontal stabiliser with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of wooden mast supports with linkage rods and screws for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A complete replacement Auto-Start system including motor, gearbox, flexi-shaft drive, etc for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement battery hatch for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 4018 800KV brushless outrunner for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of 3 blade grip assemblies for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement main rotor plate for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of 3 main blades with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement main landing gear for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement pair of 90mm foam main wheels with retainers for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement tail wheel assembly for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 10x8 3-blade propeller for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement head button for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement spinner nut for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement motor cowl for the Durafly Auto-G2 V2 Gyrocopter.

A replacement set of fiber-reinforced pushrods for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement mast fairing with fixing screws for the Durafly Auto-G2 V2 Gyrocopter.

A replacement Auto-Start switch for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 20A brushless ESC for the Durafly Auto-G2 V2 Gyrocopter includes an XT60 connector and the JST connector for the Auto-Start system.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement vertical stabiliser with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

Dolphin Jet EPO 1010mm - Replacement Vertical & Horizontal Tail

Phantom FPV Flying Wing 1550mm - Replacement Motor Cover

Telemicro 520mm - Replacement Spinner

Hobbyking Bixler 2 EPO 1500mm - Replacement Pushrod Set

HobbyKing Bixler 2 EPO 1500mm -  Replacement Flap Hinges (6pcs/bag)

Works for both Bixler 2 and Bix3 models.

Hobbyking Bixler 2 EPO 1500mm - Replacement Aileron Hinges (10pcs/bag)

Durafly Auto-G2 Gyrocopter 821mm - Replacement Battery Hatch

Pioneer 1020mm - Replacement Horizontal Stabilizer

La Belle Dame 1180mm - Propeller Nuts

This great-looking and superb flying AVIOS KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. The simplistic, yet striking color scheme depicts the type of paint jobs commonly used on civilian propliners.

The KingTwin 1700 is packed full of cool features including LED lights, retracts, and split flaps. The powertrain of 2 x Aerostar 3748-820KV brushless outrunners with Aerostar 40A ESCs was chosen by the AVIOS team after careful testing. This combination of motors, ESCs, contra-rotating props, and a 4S LiPo battery proved to be the optimum setup for power and duration.

This great-looking and superb flying Avios KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. With so many fantastic color schemes available for this type of airplane, Avios have decided to produce a plain white version. This plain white finish provides the perfect blank canvas for you to produce a completely unique, and bespoke color scheme of your own choice.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.