Aircraft
-
XFLY Quad 40mm C-17 PNP RC plane$299.99XFly C-17 Globemaster Quad 40mm EDF PNP
Learn MoreDescription
The XFly Globemaster C-17 brings a faithful transport-aircraft presence to the EDF class with a 1200mm wingspan and a scale four-engine layout. Its factory pre-installed power system combines four 40mm fans driven by 1413-KV5000 brushless motors and four 20A ESCs, delivering ample thrust for vertical climbs, rolls, loops and confident circuit flying on a suitable 4S LiPo.
Landing gears with dual wheels provide strong ground handling, helping maintain accuracy and stability during taxi, take-off and landing. A centrally positioned battery bay makes it straightforward to achieve a proper centre of gravity, while the model’s convenient size allows flying at large parks, sports fields or traditional RC flying sites. Supplied fully painted with decals applied and designed for quick assembly, it transports easily without disassembly and can fit fully assembled in most vehicles. Typical flight times of 3–8 minutes are achievable with sensible throttle management and a recommended 4S 2600–4000mAh LiPo battery. Supplied without transmitter, receiver or battery.
Features
- Four efficient 40mm EDF power configuration delivering an abundance of thrust for vertical climbs, rolls, loops and other maneuvers
- Landing gears with dual wheels designed for grip ability, accuracy and stability
- Battery compartment reasonably designed to easily achieve a proper C.G.
- Extended flight time of 3-8 mins when using recommended 4S 2600-4000mAh LiPo battery
- Quick and easy assembly
- Full painted with decal pre-applied
Technical Specifications
- Wingspan: 1200mm/47in
- Length: 1150mm/45in
- Wing loading: 97g/dm2
- Wing area: 16dm2
- Weight in flying: 1560g
- Motor: 1413-KV5000 *4
- Controller: 20A *4
- Servos: 9g servo*7
- CG: 145mm from the leading edge
- Recommended battery: 4S 2600-4000mAh
- Landing gear: Landing gears with dual wheels
- Ailerons: Yes
- Elevator: Yes
- Throttle: Yes
- Rudder/Steering: Yes
- Flaps: Yes
- Retractable landing gear: No
- Radio: 5 channels
- Recommended environment: Outdoor
- Flight time: approximately 3-8 minutes
- Assembly time: about 15 minutes
- Age: 14 years and up
- Level: Intermediate
Content
- XFly C-17 Globemaster Quad 40mm EDF PNP
- Motor: 1413-KV5000 *4
- ECS: 20A *4
- Servos: 9g servo*7
Required
- 5-Channel radio transmitter
- 5-Channel receiver
- 4S 2600-4000mAh
- 4S Battery charger
-
XFLY Hurricane 1200mm Brown Camo PNP RC plane$229.99XFly Hawker Sea Hurricane Mk1 Brown Camo 1200mm PNP
Learn MoreDescription
The XFly Hawker Hurricane Mk1 Brown Camo 1200mm PNP captures the character of the RAF legend in a practical 1.2m span. Meticulously moulded in durable EPO foam with an authentic matte finish, this Mk.I replica features a classic?brown camo scheme and rich scale touches including a 3-blade propeller, precisely outlined canopy with pilot figure, exhaust stacks, and functional outward retractable landing gear.
Designed for a convincing scale flying experience, the Hurricane is powered by a robust 3541-KV810 brushless motor paired with a 40A ESC. A spacious battery bay accepts 4S 2600–4000mAh LiPo packs, offering flexible flight times to suit your style. Metal shock-absorbing main struts and reliable electric retracts tame grass and hard runways, while the scale-inspired four-panel split flaps enhance low-speed handling, stability and landing control. For orientation and realism, bright LED wingtip lights are integrated into the airframe.
Whether you’re drawn to the Hurricane’s Battle of Britain heritage or simply appreciate a capable 1.2m warbird, this PNP delivers a balanced blend of scale detail and everyday performance at your local flying site.
Features
- High-power 3541-KV810 motor and a 40A ESC delivering exceptional thrust and responsive performance.
- Electric retractable landing gear with shock-absorbing struts for smooth ground handling and scale-style operation.
- Scale-inspired four-panel split flaps for improved low-speed stability and shorter takeoffs/landings.
- Bright LED wingtip lights enhances visibility and add to the model’s realistic appearance.
- Authentic 3-blade propeller for added detail and efficient thrust.
- Generous battery compartment allows easy installation of 4S 2600-4000mAh LiPo batteries.
- Six 9g metal geared servos.
Technical Specifications
- Wingspan: 1200mm/47''
- Overall Length: 938mm/36.9"
- Wing Load: 85g/d㎡
- Wing Area: 22d㎡
- Flying Weight: 1850g
- Propeller Size: 11x7" 3-blade
- Motor: 3541-KV810
- ESC: 40A
- Servos: 9g metal-geared servo*6
- Flying Duration: 5 - 10 mins
- Landing Gear : Retractable landing gear
- Channels: 6CH-aileron, elevator, throttle, rudder, retract, flap
- Battery Dimension: 210X35X35mm (Length*Weight*Height)
- Recommended Battery: 4S 2600-4000mAh
- Build&Test Time: 15 minutes
- Level: Intermediate
Content
- XFly Hawker Sea Hurricane Mk1 Brown Camo 1200mm PNP
- Motor: 3541-KV810
- ECS: 40A
- Servos: 9g metal-geared servo*6
Required
- 6 channel transmitter and receiver (not included)
- 4S Li-Po battery balance charger (not included)
- Recommded 4S 2600mAh~4000mAh 35C Li-Po battery (not included)
-
Durafly™ Auto-G2 Gyrocopter 821mm - Replacement Battery Hatch$2.00Durafly Auto-G2 Gyrocopter 821mm - Replacement Battery Hatch
Learn More -
Pioneer 1020mm - Replacement Horizontal Stabilizer$14.57Pioneer 1020mm - Replacement Horizontal Stabilizer
Learn More -
-
Dolphin Jet EPO 1010mm - Replacement Vertical & Horizontal Tail$12.24Dolphin Jet EPO 1010mm - Replacement Vertical & Horizontal Tail
Learn More -
Phantom FPV Flying Wing V1 and V2 1550mm - Replacement Motor CoverSpecial Price $13.99 Regular Price $15.99Phantom FPV Flying Wing 1550mm - Replacement Motor Cover
Learn More -
Phantom FPV Flying Wing V1 and V2 1550mm - Replacement Vertical Stabilizer (1pair)$15.71Phantom FPV Flying Wing 1550mm - Replacement Vertical Stabilizer (1pair)
Learn More -
Phantom FPV Flying Wing 1550mm V2 - Replacement Main Wing (1pair)$45.69Phantom FPV Flying Wing 1550mm - Replacement Main Wing (1pair)
*Note* For V2 version only. V2 has removeable wing panels.
Learn More -
Telemetry Radio Cases for Ground and Air Modules$6.47Keep your Telemetry Radios safe! These cases are made out of slightly translucent ABS plastic, so you still can see TX/RX LEDs. They have a very tight fit and finish and are clearly labeled. These cases will make your setup look like Pro gear, while keeping them safe!
Designed to fit FPV Radio Telemetry Kit - 915Mhz/433MHz(#42846/42847,not included), But fits other brand Telemetry Radios as well.
Learn More
Includes:
3M Foam Double-tape X1
Ground module Case X1
Air module Case X1 -
H-King MX2 3D EPP 955mm ARF$79.99Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!
Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!
Learn More
Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.
This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!
Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation
Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)
Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7/11x4.7 propeller
4 x 9g servos -
Hobbyking Walrus and Night Walrus Glider 1400mm - Prop & Spinner Set (9 x 5)$8.16Hobbyking Walrus and Night Walrus Glider 1400mm - Prop & Spinner Set (9 x 5)
Learn More -
-
Hobbyking Bixler 2 EPO 1500mm - Replacement Pushrod Set$3.27Hobbyking Bixler 2 EPO 1500mm - Replacement Pushrod Set
Learn More -
Flap Hinges - Suitable Bixler 2/3 (6pcs/bag)$1.21HobbyKing Bixler 2 EPO 1500mm - Replacement Flap Hinges (6pcs/bag)
Works for both Bixler 2 and Bix3 models.
Learn More -
Hobbyking Bixler 2 EPO 1500mm - Replacement Aileron Hinges (10pcs/bag)$2.67Hobbyking Bixler 2 EPO 1500mm - Replacement Aileron Hinges (10pcs/bag)
Learn More -
Cessna 182 light aircraft 775mm EPO Plug-&-FlySpecial Price $19.50 Regular Price $56.23Mini Brushless powered 182 light aircraft EPO R/C plane (ARF)
This Almost Ready to Fly kit will take you around 10-15 minutes to complete. It comes with a 15A speed controller and 2100kv brushless motor.
The 182 is made from EPO foam and is a great parkflyer. It will absorb crashes and bumps without sustaining any real damage.
It's small size means its easy to cary just about anywhere and it's easy flying characteristics plus flexible and forgiving EPO construction make it a stress free trainer for almost anyone.
Spec.
Length: 600mm
WingSpan: 775mm
Wing Loading: 25g sq.dm
Main Wing area: 9sq.dm
Prop: 6x4
Weight: 300g w/ battery
Motor: Brushless motor 2100kv
ESC: 15A
Battery: 7.4v 850mAh 2S1P
Servos: 8g x 3Learn More
Required.
Tx/Rx (4ch minimum)
7.4v 850mah 2S1P Lipo Battery -
Super Fast FlyCat 56mm EDF Jet (KIT)$27.04This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!
The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.
This plane is extremely fast, (over 100mph!), however still stable at slow flight.
Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitterOur flight report.
Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.
We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.
EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.
First flight.
We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.
The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!
Overall an excellent plane which flys smoothly, even on windy days.
We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.
Learn More -
P-51D Shangri La - Replacement Horizontal Tail$15.17P-51D Shangri La - Replacement Horizontal Tail
Learn More -
3-Blade Prop Set 10x7 B-17P - Bushmule - Skymule (Std & Reverser Rotation)$21.97Prop Set for B-17 Memphis Belle 1875mm, 2 x Std Rotation, 2 x Reverse Rotation.
10x7 3 blade props suitable for many models.
Learn More -
Durafly Me-163 950mm - Replacement Propeller (2pc) 6x4$2.00Durafly Me-163 950mm - Replacement Propeller (2pc) 6x4.
Learn More -
Replacement Propeller Blade Set for Durafly Curtiss P-40N Warhawk.$5.31Replacement propeller blade set for Durafly Curtiss P-40N Warhawk.
Learn More -
Durafly™ Micro Series - Replacement Motor MountSpecial Price $0.90 Regular Price $1.15Durafly® ™ Micro Series - Replacement Motor Mount
Learn More -
Super Kinetic - Replacement Horizontal Wing (With Plastic Parts and Sticker)$11.62Super Kinetic - Replacement Horizontal Wing (With Plastic Parts and Sticker)
Learn More -
-
Super Kinetic - Replacement Folding Prop Blades (1pair)Special Price $2.50 Regular Price $3.09Super Kinetic - Replacement Folding Prop Blades (1pair)
Learn More -
-
-
Super Kinetic - Replacement Control Wire - Steel (With Ball Link)$3.10Super Kinetic - Replacement Control Wire - Steel (With Ball Link)
Learn More -
Super Kinetic - Replacement Brushless Motor (2630-KV1000)$18.60Super Kinetic - Replacement Brushless Motor (2630-KV1000)
Learn More -
Super Kinetic - Replacement Decals (2pcs/set)$11.56Super Kinetic - Replacement Decals (2pcs/set)
Learn More -
AVIOS BushMule Sports/STOL Airplane 1500mm Optional Ski Set (3pcs)$12.99AVIOS BushMule Twin-Motor Sports/STOL Airplane 1500mm Optional Ski Set (3pcs).
Please note: With small modifications, this ski set is suitable for other models such as the Durafly Slow Poke, etc.
Learn More -
Durafly™ SkyMule 1500mm - Bottom Servo Hatch$2.67Durafly™ SkyMule 1500mm - Bottom Servo Hatch
Learn More -
HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set$3.81HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set
Learn More
Login and Registration Form