Aircraft

The Walrus is an extremely stable RC plane for the new flyer to the seasoned pro. Now you can light up the sky and enjoy the fun of night flying. LED super bright lights will light up your nightlife!

XFly C-17 Globemaster Quad 40mm EDF PNP

XFly Hawker Sea Hurricane Mk1 Brown Camo 1200mm PNP

This great-looking little racer can trace its lineage back to the very popular Rare Bear which we sold a few years ago. This was a very fast parkflyer based on the Reno Racers that was amazing fun to fly, was very tough and it became a firm favorite extremely quickly.

Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.

Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

Capable of taking off from and landing on just about any surface including water, ice, snow, grass and more, the Skipper is a truly versatile model. Add to that its super low wing loading and high-performance brushless power system and you've got yourself a model that is an absolute blast to fly!

The Voltigeur is a well-known performer and we've just taken it to the next level. Flying the Voltigeur is a dream, using the recommended 3S Lipo battery for aerobatics and sports flying it handles like a trainer, docile, and extremely predictable. Everything from rolling circles, waterfalls, inverted harriers, and blenders, nothing will stop the Voltigeur.

Looking for the perfect RC trainer plane? How about a smooth RC glider or an inexpensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The HobbyKing Bixler 2 does all that and more! This electric RC plane has undergone some major improvements including (but not limited to) bigger air inlets for better motor cooling of the uprated motor for even better performance. 

Durafly Auto-G2 Gyrocopter 821mm - Replacement Battery Hatch

Pioneer 1020mm - Replacement Horizontal Stabilizer

La Belle Dame 1180mm - Propeller Nuts

Dolphin Jet EPO 1010mm - Replacement Vertical & Horizontal Tail

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

Telemicro 520mm - Replacement Spinner

Hobbyking Bixler 2 EPO 1500mm - Replacement Pushrod Set

HobbyKing Bixler 2 EPO 1500mm -  Replacement Flap Hinges (6pcs/bag)

Works for both Bixler 2 and Bix3 models.

Hobbyking Bixler 2 EPO 1500mm - Replacement Aileron Hinges (10pcs/bag)

This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!

The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.

This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)

Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitter

Our flight report.

Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.

We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.

EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.

We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.

The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!

Overall an excellent plane which flys smoothly, even on windy days.

We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.

Durafly® ™ Micro Series - Replacement Motor Mount

Super Kinetic - Replacement Motor Mount

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

Super Kinetic - Replacement Canopy

The all new Super Viper 105mm Version 4 has gone throgh a complete aero design enhancement! This aircraft is much more improved with better flight and aerobatic perfoance. With 16mm full aluminum main wing tube, it limit the amount of wing flex. Control surface have been improved with stainless steel pushrod and connectors, no more clevis! Steel offer higher precision from servo to surface. 

Super Kinetic - Replacement Control Wire - Steel (With Ball Link)

Features:
• EPP material, good toughness and more resistance to falling and explosion.
• With flight control, can fly in a strong wind of level 5.
• Simple assembly, convenient disassenbly.
• Compatible with Futaba receivers (5V for S-BUS, 3V for DSM).
• With low signal and voltage alarm,timely remind the return.
• Strong power motor,quick response and fast locking.
• Support two takeoff methods: ground takeoff and hand throw takeoff.
• With self-stabilization system, you can get start quickly.
• 6 channel glider remote controlled aircraft (rise, descent, left turn, right turn, forward roll, 3D crane flight)
• Support one-key 3D stunts - With 6-Axis gyroscope, automatically balance, suitable for beginners.

Specs:
Item Name: QIDI-550
Material: EPP
Wingspan: 505mm
Fuselage Length: 620mm
Motor: 2004 KV2800 brushless motor
Servo: 4.3g digital *3pcs
ESC: 12A brushless
Propeller: 6x3cm 2-blade
Battery: 7.4V 500mAh
Vertical Flight Time: 20mins
Normal Flight Time: 20mins
Charging Time: 20mins
Remote Control: 2.4G 6CH Mode 2
Control Range: About 400m
Takeoff Weight: 140g
Product Size: 50x62x10cm
Package Size: 54.6x11.8x19.3cm
Assembly: Required

Included:
1 x QIDI 550 (RTF) SWIFT-ONE Sky Challenger EPP 6CH Profile 3D Aerobatic Plane w/6-Axis Gyro Stabilization System (505mm)
1 x 6ch 2.4GHz transmitter
1 x 7.4V 500mAh LiPo battery
1 x Spare propeller
1 x Screwdriver
1 x USB battery charger
1 x User manual

Required:
4 x AA batteries for transmitter

Super Kinetic - Replacement Decals (2pcs/set)

Durafly™ SkyMule 1500mm - Bottom Servo Hatch

HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set

HobbyKing® Bixler 3 Trainer 1550mm - Replacement Landing Gear