Aircraft

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The AVIOS Albatross HU-16 is a beautiful twin-engine flying boat with a large monohull, and wing floats, the entire underneath of the front portion of the hull is reinforced with plastic. This allows it to happily take the knocks and bangs of using a grass airfield to fly from, but as mentioned before, it really does come into its own when operating from your favorite lake or waterway. Taxi-ing, and lining up for take-off are made all that much easier with the water rudder and the supplied Aerostar forward/reverse water-resistant ESCs. Built-in flaps provide plenty of lift and make the landings and take-offs that much easier and extremely scale-like.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.