Vliegtuigen

Looking for the perfect RC trainer plane? How about a smooth RC glider or an inexpensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The HobbyKing Bixler 2 does all that and more! This electric RC plane has undergone some major improvements including (but not limited to) bigger air inlets for better motor cooling of the uprated motor for even better performance. 

Dit nieuwste model is verbeterd ten opzichte van de Bixler 2 en is het perfecte RC-trainervliegtuig, de perfecte RC-zweefvliegtuig en het perfecte FPV-vliegtuig voor beginners. Bevestig uw vluchtcamera in de neus of luifel van het vliegtuig om tijdens het vliegen te genieten van First Person View. Het Bixler 3 PNF-vliegtuig is een plug-and-fly-model dat een radiosysteem en batterij vereist.

Met een nieuw kleurenschema, het dynamische contrast en de strepen aan de onderkant maken de oriëntatie gemakkelijker. De motor is geüpdatet naar een 2620-1400KV Brushless Outrunner voor efficiëntere vluchttijden. Koppel dit elektrische RC-schuimvliegtuig met een 2200 mAh 3S 20C LiPo-batterij, evenals een 4 GHz 6-kanaals zender en ontvanger voor optimaal vliegen.

If you're looking for a fast, fun, aerobatic sports model that can be flown just about anywhere, the H-King Super Kinetic is what you're after! From high-speed aerobatics including pylon style "bank and yank" flying to off-power gliding, the H-King Super Kinetic handles it all with ease. It's a truly versatile model that is a blast to fly.

Made of tough EPO, the Phoenix V2 glider fuselage has been blow moulded with pylon formers to make it near indestructible. The Phoenix was made to last a lifetime with its smooth, rigid, yet remains light enough for the glider to perform. Assembly can be completed in under 15 minutes so you'll be flying in no time.

Deze geweldige kleine racer kan zijn afstamming herleiden tot de zeer populaire Rare Bear die we een paar jaar geleden hebben verkocht. Dit was een zeer snelle parkvlieger gebaseerd op de Reno Racers die geweldig leuk was om te vliegen, erg zwaar was en het werd razendsnel een favoriet.

The Phoenix 2400 is the largest glider in the Phoenix range. It comes with an almost indestructible ABS plastic hull and strong EPO foam wings and tail section. With its smooth, stiff hull, the Phoenix is ​​durable for a lifetime and yet light enough for the glider to work without any problems. An additional canopy with camera mount is included. Once you have your camera installed, you can either enjoy FPV flying or just take pictures of your flights.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

Wil je een vliegtuig dat alles aankan? Geboren uit dezelfde stal als onze best verkochte SkyMule, is de Avios BushMule het stevige werkpaard van de lucht. Dit PNF-vliegtuig (Plug and Fly) neemt ruw terrein, water en sneeuw op en maakt gebruik van dubbele motoren voor geweldige sportvlieg- en STOL-mogelijkheden.

De Avios BushMule V2 zet de BushMule-stamboom voort, maar met enkele verbeteringen, waaronder:

• Verbeterde servoverbinding voor het bestuurbare neuswiel
• Herpositionering hoofdlandingsgestel, dit is verder naar achteren verplaatst
• Messing schroefdraad in de vleugelsteunen
• Verbeterde propellers en spinners zoals gebruikt op de populaire Avios Albatross
• Nieuw, opvallend kleurenschema

De Wargo Signature Edge 540T 3D is nog een ander ongelooflijk vliegtuig in de serie geïnspireerd door de beroemde 3D-piloot Michael Wargo. De Edge 540T is speciaal ontworpen voor zeer nauwkeurige 3D-vlieg- en aerobatic-training. Michael Wargo, onze teampiloot en 3D-expert, wilde een schuimvliegtuig dat stijver en lichter was dan andere foamies. Dit werd bereikt door de combinatie van een stijf, lichtgewicht balsaframe bedekt met lichtgewicht, crashbestendig EPP-schuim.

De Avios Albatross HU-16 is een prachtige tweemotorige vliegboot met een grote monohull en vleugeldobbers, de gehele onderkant van het voorste deel van de romp is versterkt met plastic. Hierdoor kan hij de stoten en stoten van het gebruik van een grasvliegveld om vanaf te vliegen met plezier aan, maar zoals eerder vermeld, komt hij echt tot zijn recht wanneer u vanaf uw favoriete meer of waterweg opereert. Taxiën en in de rij staan ​​voor het opstijgen wordt een stuk eenvoudiger met het waterroer en de meegeleverde Aerostar forward/reverse waterbestendige ESC's. Ingebouwde flappen zorgen voor veel lift en maken het landen en opstijgen veel gemakkelijker en extreem schaalachtig.

De SonicModell Baby AR Wing PRO is een dynamische, sterke, compacte vliegende vleugel die indrukwekkende prestaties zal leveren. De Baby AR heeft afneembare vleugels, dus er is geen lijm nodig bij het in elkaar zetten, en de vleugels kunnen gemakkelijk worden verwijderd voor transport. Andere kenmerken zijn een groot batterijcompartiment, een neuscameracompartiment voor FPV vliegen en een uniek "FlexiLock" scharniersysteem dat zorgt voor een wrijvingsvrij besturingsvlak.

De SonicModell AR Wing PRO is een sterke, dynamische, efficiënte, hefbare vliegende vleugel die indrukwekkende prestaties levert met stijl. De AR Wing PRO heeft afneembare vleugels, dus er is geen lijm nodig, wat betekent dat de vleugels gemakkelijk kunnen worden verwijderd voor transport. Andere kenmerken zijn een grote batterij/vliegcontroller ruimte, een neus camera ruimte voor FPV vliegen die geschikt is voor DJI en andere camera's, en tal van compartimenten voor de FPV zender (veel ruimte voor lange afstand systemen) en je RC ontvanger, enz. Deze compartimenten hebben aerodynamisch ontworpen NACA luchtkoelsystemen om alles, inclusief je FPV uitrusting, lekker koel te houden.

De SonicModell AR Wing Classic biedt ongelooflijke prestaties en veelzijdigheid. Hij heeft afneembare vleugels en vleugeltips die gemakkelijk kunnen worden verwijderd voor transport. Hij heeft ook een ruim materiaalcompartiment plus een paar kleinere compartimenten, zodat er genoeg ruimte is voor je accu's, radioapparatuur en FPV-apparatuur.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and a swept forward wing for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

A replacement fast connection distribution board set with extension leads for the Avios 1600mm Super Tucano.

A replacement Vertical tail for the H-King Flybeam 2 1092mm.

A replacement canopy/battery hatch for the Green/White 680mm Durafly Rare Bear Reno Racer. 

A replacement Hatch for the H-King Flybeam 2 1092mm.

A replacement Motor for the H-King Flybeam 2 1092mm.

A replacement wing spar for the XFLY Alpha Jet.

A replacement prop adapter for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement vertical stabilizer with rudder and factory-applied decals for the AXN Floater-Jet. Please note that this spare part may have a different color scheme to your AXN Floater-Jet but that is the only difference.

A replacement spinner for the Avios Extra-300 NG 1600mm

A replacement motor cowl for the Avios Grand Tundra 2 1700mm.