RC-Opladers en accessoires

Energie voor je compatibele elektrische onderdelen met de 4mm HXT DC jack converter. De DC Jack converter heeft twee 2 mm jack plug connectors (positief centra) en is ideaal voor het aandrijven van laders of soortgelijke elektrische items.

specs:
Lengte: 210mm
DC Jack: 2mm
Batterij Connector: 4mm HXT

De meeste standaard 7S lithium-polymeer accu's zijn voorzien van twee balans-poorten, een 4S en 3S balans lood (totaal 7S). Dit maakt het moeilijk om op te laden met de meeste standaard batterijladers die slechts beschikken over één balans poort.

Met deze super handige adapter kunt u gemakkelijk geld van uw 7S batterij met een standaard 8 ~ 10S in staat balans lader die JST-XH balans pluggen aanvaardt. Deze adapter neemt de 4S en 3S individuele stekkers uit je rugzak, en combineert ze tot één 7S balans plug die in staat is om verbinding te maken met de meeste standaard 8 ~ 10S staat laders.

specs:
Ingang: 1 x 4S en 1 x 3S JST-XH balans plug
Output: 7S JST-XH balans plug
Lengte: 100mm

HXT 4mm tot T-connector Battery Adapter Lead (2pc)

Deze adapter zal een HXT 4mm uitgerust batterij om te zetten in een T-connector voor gebruik met een T-connector uitgerust ESC of Laadleiding.

spec:
Gewicht: 7g (per stuk)

Gebruik deze adapter om een ​​XT-60 Laadleiding te zetten voor het opladen van JST uitgerust batterijen.

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.

XT30U Silicone Charge Lead with 4mm Banana Plugs.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

De ToolkitRC SC100-adapterkabel wordt gebruikt voor het voeden van batterijladers met een laag wattage of andere apparaten met een XT60-ingangsconnector van een USB-C-voeding tot 100 W.

Specificaties:
Type: ToolkitRC SC100 XT60~USB-C-protocolkabel
Ingang: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Uitgangsspanning: 5~20V max
Uitgangsstroom: 5A max
Uitgangsconnector: XT60
Lengte: 50 cm
Gewicht: 35g