Vliegtuigen

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

The Voltigeur is a well-known performer and we've just taken it to the next level. Flying the Voltigeur is a dream, using the recommended 3S Lipo battery for aerobatics and sports flying it handles like a trainer, docile, and extremely predictable. Everything from rolling circles, waterfalls, inverted harriers, and blenders, nothing will stop the Voltigeur.

After the success of the original H-King FLYCAT 70mm EDF jet, which was a basic aileron, elevator, and throttle-only model, we now have the FLYCAT V2. This new version has an upgraded power setup with a brushless inrunner motor and Aerostar RVS G2 ESC, twin rudders, a set of pre-installed electronic retracts, and a brand-new high-viz color scheme. It retains from the V1 its stunning streamlined looks, agility, performance, and impeccable flying characteristics.

With a new more powerful setup, the 2860-2100KV brushless inrunner motor and the 12-blade EDF unit make the Flycat V2 not only quite a bit faster, but it improves the verticals and it also sounds amazing, just like a real turbine, especially when doing fast, high-speed passes. Coupled with the motor and EDF unit is one of our Aerostar 80A RVS G2 speed controllers, this not only gives you solid reliability, it also offers you the choice of instant reverse. If you are flying from a hard runway this helps shorten the landing run quite considerably when selected after touchdown. Another feature of the FLYCAT V2 is the twin-rudders, these bring in another dimension when flying the V2. It is now able to perform even more jet-like maneuvers including falling leaves and knife-edge, etc, and they also help in the approach to landing and when flying at slower speeds. The new high-viz color scheme not only looks great, but it stands out well in the sky which helps orientation when flying big, fast aerobatic maneuvers. Last but not least on the V2 there is no need for hand-launching, it comes with a set of pre-installed grass-capable electronic retracts. These robust and reliable retracts enable smooth take-offs and landings on hard and grass runways

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

Durafly SlowPoke De Durafly SlowPoke is een EPO-schuimmodel van het klassieke ontwerp. Als toevoeging aan het gemakkelijk vliegende ontwerp van de SlowPoke, heeft Durafly een aantal grotere wielen toegevoegd om het opstijgen en landen op een groot aantal verschillende velden nog gemakkelijker te maken. Een geweldig vliegtuig voor je eerste low-wing taildragger of voor de veeleisende ervaren piloot die een fantastisch uitziend, gemakkelijk vliegend vliegtuig wil.

The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.

The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

The Durafly Carbon Arcus is a sleek and beautiful F3A biplane designed to perform smooth, F3A-style pattern aerobatics and is the perfect choice for honing your aerobatic skills. It features a durable, lightweight EPO airframe with carbon reinforcement, aluminum landing gear, carbon interplane struts, and an advanced 4S motor and prop combination that offers a high power-to-weight ratio for unending verticals and incredible performance.

Flying the Arcus F3A is a dream, the long tail moment, the low wing loading, and the abundance of power give you a stable and predictable airplane. Take-offs require very little rudder input, rolls are crisp and axial, and loops can be as large as you wish. The large propeller provides ample braking action in the downlines to avoid overspeeding, and if you enjoy flying knife-edge, then the Arcus II performs this with ease. No roll or pitch coupling here, just apply a touch of rudder, control the throttle to hold your line, and the Arcus will knife edge until the cows come home. Finally, when the time comes, throttle back, and the Carbon Arcus settles into a nice sink rate for a perfect 3-point landing every time.

De H-King Crusader 30E is gebaseerd op het klassieke stickontwerp. Dit elektrische RC vliegtuig kan worden gevlogen door zowel beginners als experts. Het is gemaakt van lichtgewicht laag en balsa dat is geverfd met een hoog contrast kleurenschema. De Crusader zal opvallen op de grond en in de lucht bij je plaatselijke hobbyclub.

De H-King Viper 64 is betaalbaar, zeer stabiel en heeft voorspelbare handling kwaliteiten, waardoor het de ideale keuze is voor je eerste vlucht met EDF jets. Hij ziet er prachtig uit en de prestaties op zijn 6S set-up geven hem een fantastische snelheid en de mogelijkheid om grote, jet-achtige manoeuvres uit te voeren, dit maakt het ook de perfecte sportjet voor de meer ervaren RC-piloot. De H-King Viper 64 is gebaseerd op een klein tweezits zelfgebouwd straalvliegtuig, ontworpen door de Viper Aircraft Corporation in de Verenigde Staten aan het eind van de jaren 1990.

De H-King MX2 Extreme 30E is perfect om een ​​piloot mee te nemen van algemene sportvliegen tot zelfverzekerd vliegende 3D-acrobatiek. Hij is licht van gewicht, heeft een krachtige borstelloze motoropstelling en beschikt over grote bedieningsoppervlakken die hem geweldig maken voor levendig tuimelen en extreme, pittige vormen van vliegen. Dingen zoals zweven, watervallen, kiekendieven, messcherpte, rollende cirkels en andere extreme 3D-acrobatiek worden veel gemakkelijker gemaakt tijdens het vliegen met de MX2 Extreme.

Na het succes van de EFX Racer werd besloten om een mini versie te produceren, zoals ze zeggen, alle goede dingen komen ook in kleine verpakkingen, dus de MFX Racer was geboren. De MFX is ontworpen volgens dezelfde veeleisende normen als zijn grotere broers en biedt nog steeds snelheid, kracht, wendbaarheid en de stabiliteit die je gewend bent van een Durafly model. Bovendien krijg je de eenvoud van montage en de kwaliteit die alleen een EPO-model van Durafly kan bieden.

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

Na het succes van de EFX Racer werd besloten om een mini versie te produceren, zoals ze zeggen, alle goede dingen komen ook in kleine verpakkingen, dus de MFX Racer was geboren. De MFX is ontworpen volgens dezelfde veeleisende normen als zijn grotere broers en biedt nog steeds snelheid, kracht, wendbaarheid en de stabiliteit die je gewend bent van een Durafly model. Bovendien krijg je de eenvoud van montage en de kwaliteit die alleen een EPO-model van Durafly kan bieden.

Het aantal onderdelen en de montagetijd zijn minimaal, de MFX Racer klemt en schroeft gewoon in elkaar in minder tijd dan het kost om een batterij op te laden. De MFX Racer met zijn 4S setup is snel, maar voelt toch uitzonderlijk stabiel aan en geeft de piloot dat locked-in gevoel. Maar in tegenstelling tot de meeste snelheidsmachines heeft hij ook een uitzonderlijk goede langzame besturing. Met zijn 4-kanaals besturing is de MFX Racer ook zeer aerobatisch, met grote loopings, snelle rollen, knife edge, snaps en spins, de MFX Racer kan het allemaal en nog veel meer, zijn enige limiet ben jij de piloot! De MFX heeft 2 vleugelopties (beide worden meegeleverd in de doos), een standaard 815mm optie, of de 715mm clipped wing optie. De standaard vleugelopstelling geeft een veel betere klimsnelheid, terwijl de geknipte vleugelopstelling de rolsnelheid drastisch verhoogt.

The Avios Extra NG (Next Generation) from Hobbyking is a premium semi-scale Aerobatic RC Plane modeled after the latest Extra series aircraft. The full size offers improved aerodynamics, an even higher degree of manoeuvrability, and precise handling. The Avios version of this incredible airplane inherits all these features to make it a great-looking, highly aerobatic, 3D-capable machine.

This high-performance aerobatic airplane features a potent 6S power system and includes a SK3 5055-500KV motor, Aerostar 80A RVS G2 ESC, and a 16x6 propeller. This setup gives you an incredible high power-to-weight ratio. High-torque, high-voltage, metal-geared 30g Turnigy 30/7-DHV digital servos are used throughout. These have excellent resolution and centering so that your exact transmitter inputs are conveyed directly to the control surfaces for precise control in all types of extreme manoeuvres. Also included are a pair of bolt-on "Side Force Generators" for increased side area, which makes for enhanced and stable knife-edge flying - a hallmark of the Extra NG design.

Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.

Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

Need spare parts for your H-King Voltigeur? Use these replacement wing panels to fix your plane.

Replacement cowling for the H-King Voltigeur

Kingcraft Pitts Special S-2B 1200mm Replacement L/R Lower Wing Set.

If you're looking for a fast, fun, aerobatic sports model that can be flown just about anywhere, the H-King Super Kinetic is what you're after! From high-speed aerobatics including pylon style "bank and yank" flying to off-power gliding, the H-King Super Kinetic handles it all with ease. It's a truly versatile model that is a blast to fly.

Deze geweldige kleine racer kan zijn afstamming herleiden tot de zeer populaire Rare Bear die we een paar jaar geleden hebben verkocht. Dit was een zeer snelle parkvlieger gebaseerd op de Reno Racers die geweldig leuk was om te vliegen, erg zwaar was en het werd razendsnel een favoriet.