Radiocomandi

si aumenta RC validità del segnale e ridurre la probabilità di perdita di segnale in fibra di carbonio e / o cellule di 3D così come le piattaforme FPV lungo raggio usando la compatibilità 6 canale del modulo diversità OrangeRX DSMX / DSM2.

Il / DSMX compatibile 6 Canale Diversità modulo OrangeRX DSM2 riceverà i dati da un massimo di 6 ricevitori satellitari, verificare la validità del segnale e quindi emette il segnale valido per qualsiasi interfaccia satellitare abilitata DSM2 / DSMX compatiblereceiver o tramite collegamento diretto ad un UAV o Flybarless Volo in elicottero controller.

L'unità può essere alimentata da 5V esterna ~ 8.4V o direttamente dalla porta satellitare 3.3V e incorpora una funzione di legante che permette satelliti di essere vincolati senza l'utilizzo di qualsiasi ricevitore aggiuntivo.

Caratteristiche:
• Sei porte satellitari
• Alimentato dalla porta via satellite Rx o connessione di alimentazione esterna
• Porta satellitare Rx può essere utilizzata per alimentare l'unità e satelliti collegati
• Dip passare da una modalità di funzionamento selezionabili
• spettacoli indicazione LED che satellitare è attiva

Spec:
Modalità operative: DSM2 (1024 / 22ms, 2048/11 ms), DSMX (22ms / 11ms)
Alimentazione: esterna 5V ~ 8.4V o 3.3V tramite porta satelite

The Orange OpenLRSng is an open-source receiver that can be programmed to use your choice of protocol and any channel in the 915MHz range. It is a fully user-customizable RF receiver that can even be programmed to utilize additional features such as telemetry, operative remote control via sticks (cPPM ready), and mission control.

Ricevitore R618XL DSM2x 6CH con antenna lunga e CPPM

La vitamina C è di vitale importanza per la salute del sistema immunitario e OrangeRx è di vitale importanza per la salute del vostro aereo quindi siamo entusiasti di introdurre il OrangeRX R620X di R1220X serie V2 di ricevitori esclusivi di Dipartimento Funzione ™.

Compatibile con tutti i trasmettitori aria 2.4GHz DSM2 / DSMX e adesso Come protagonista sia CPPM o uscita S.Bus, la gamma OrangeRx R620Xto R1220X V2 prende le cose al livello successivo, offrendo sia CPPM o uscita S.Bus, vero compatibilità DSMX, telemetria integrato e utilizza dual antenne fornendo vera diversità di ricezione del segnale! Aggiungere a questo fail-safe programmabile vincolante, ultra-veloce recupero brown-out e la vasta gamma di tensione in ingresso. Il risultato finale è un valore imbattibile per ricevitore aerei soldi! La nuova versione V2 ha migliorato l'antenna di commutazione algoritmo e ridisegnato RF parte frontale che si estende il campo di regolazione 2 km o più e telemetria 400 o più!

La nuova CPPM e funzionalità S.Bus è una caratteristica eccellente per l'uso con i controllori di volo multi-rotore come il KK2.1, APM, MultiWii e altri. Queste singole connessioni di linea togliere il peso e la mensa dei fili conduttori aggiuntivi per ogni singolo canale. Questo è ideale per l'uso su piccole cornici dove lo spazio è ad un premio e mantiene tutte ordinata cablaggio. Inoltre, tutti i ricevitori, da R620x a R1220x V2 offrono 12 canali su S.Bus e 9 canali CPPM.

Tutti i ricevitori offrono telemetria integrato che fornisce letture per batteria e il ricevitore pacco tensioni, corrente, temperatura e numero di giri del motore. L'utilizzo di questi ricevitori si può sempre monitorare tutti i parametri critici in modo non è necessario acquistare un modulo aggiuntivo di telemetria.

Hanno antenne di diversità doppia e due porte satelliti completamente funzionale per dare qualità di ricezione imbattibile.

Le prove in volo ha dimostrato risultati stabili e ricezione solida e ha dimostrato che la OrangeRX R620X di R1220X V2 superare la gamma di altri ricevitori nella stessa classe.

ricevitori OrangeRx sono costruiti con componenti originali, a 32 bit MCU e con lo stato dell'automazione dell'arte SMT per garantire un prodotto di qualità ogni volta. Ogni singolo ricevitore è fabbricato utilizzando PCB impedenza controllata con la sintonizzazione precisa per fornire stabilità del segnale e la gamma che supera uno qualsiasi dei prodotti ORX generazione precedenti.

Tutto OrangeRX R620X a R1220X ricevitori V2 sono QC testata utilizzando le più aggiornate metodologie di data e controllo gamma si svolge come il ricevitore è programmato. Se un ricevitore non può superare il controllo gamma in questa fase della produzione non può essere programmato, assicurando che il 100% dei ricevitori finiti sono garantiti per funzionare perfettamente. Infatti, tutti i ricevitori sono testati 3 volte; durante la produzione, collaudo e assemblaggio finale.

Il OrangeRX R620X di R1220X varia inaugura una nuova era di qualità, affidabilità e prestazioni per la linea OrangeRX up.

Caratteristiche: (R820X V2 CPPM)
• Compatibile con i sistemi radio e di moduli 1024/2048 velivoli DSM2 / DSMX
• I veri lunghe antenne di diversità che possono essere collocati in posizioni convenienti in aereo
• facilmente sostituibili antenne utilizzando i connettori U.FL (non saldati)
• ultra-veloce recupero dei cali di tensione e programmato fail safe mode
• tensione di ingresso: 3.7 ~ 9.6V
• 8 canali PWM
• 9 canali CPPM
• Estremamente lungo raggio: Controllo - 2 km o più (LOS), telemetria - 400 metri o più (LOS)
• telemetria integrato per le letture in tempo reale: temperatura, tensione della batteria, Ricevitore pacchetto di tensione, giri del motore, Corrente
• Se necessario, la funzione di telemetria integrato può essere disattivata durante vincolante.

Spec: (R820X V2 CPPM)
Canali: 8 PWM 9 CPPM
Tensione in ingresso: 3.7 ~ 9.6V
Gamma: 2km
Dimensioni: 49 x 28 x 15,5 mm
Peso: 14g

Incluso:
OrangeRx R820X V2 CPPM 8Ch 2.4GHz DSM2 / DSMX Receiver compatibile Full Range
spina Bind

*Nota:
1) Questo non è un / X prodotto Spektrum DSM2, né è una copia di un Spektrum DSM2 / X prodotto. Il marchio Spektrum e DSM2 / X è un marchio di Horizon Hobby Stati Uniti d'America.
2) Questo non è un mercato nero di prodotti Spektrum falso sotterraneo. qualità OrangeRx è garantita.
3) Accettata dal MAAA in Australia, vedere la MAAA MOP58 per l'orientamento

Il ricevitore compatto OrangeRx 6ch è stato progettato per i droni da corsa FPV con telai in carbonio. L'antenna extra-lunghezza consente di instradarli al di fuori del telaio per una portata estesa e un collegamento robusto al trasmettitore.

Walkera F210 da corsa Quad - DEVO-RX713 Ricevitore

Parte No: F210-Z-25

In the world of racing drones the requirements are for small and light weight components. The FS-A8S receiver fits these requirements superbly, being only 20x14x5.3mm and 1.2g.

The FS-A8S is built for use in multi-rotor drones and is a 1-way receiver (no telemetry). It uses the extremely stable AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 18 channels.

 This is an excellent receiver to add to your Turnigy Evolution, Turnigy i6S and Turnigy i10 radios.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Designed with space-saving and light weight in mind to fit into the smallest of drones, Frsky's XM+ Micro Ultra-Light 16 Channel receiver is no lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe and up to 1km range, the XM+ is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7 and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

Designed with space-saving and lightweight in mind to fit into the smallest of drones, Frsky's XM Plus Micro Ultra-Light 16-Channel receiver is not lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe, and up to 1km range, the XM Plus is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7, and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

The Corona R6SF 2.4GHz S-FHSS compatible 6Ch receiver is designed for use with Futaba S-FHSS/FHSS 2.4GHz transmitters, such as T4YF/T6J/T6K/T8J/T10J/T14SG/T18MZ & T18SZ air systems or 3PL/T3PRKA/4PLS/T4PX or T4GRS using S-FHSS/FHSS RF protocol.

When working in "Special mode" the R6SF can output up to 8 channels using S.bus to allow greater flexibility in performance as well as a convenient way to reduce the wire count in tight installations.

The top of the range, 16 Channel X8R receiver from FrSky with 8 normal PWM outputs and no less than 16 channels on the dedicated S.BUS output. Now supplied with the 2015 firmware to compy with EU regulations.

This is an outstanding receiver for all applications and is perfect for use with the FrSky Horus, X9D and X9E Taranis transmitters, with their built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

The FrSky RX8R has been upgraded to the PRO version but retains all the old features. The new PRO version has increased precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. It also has improved anti-interference from the ignition system on combustion engines.

The Turnigy GT5 receiver is perfectly matched to work with the outstanding Turnigy GT5 6CH 2.4GHz AFHDS 2A Surface Radio to provide the most reliable link. Stop changing receivers from model to model and get an extra receiver now.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

Il ricevitore FLYSKY FGR4S utilizza il nuovo protocollo AFHDS3 (sistema digitale di salto di frequenza automatico di terza generazione). Utilizza un'antenna singola interna per la trasmissione bidirezionale ed è di dimensioni compatte e facile da installare. Può emettere segnali standard PPM e i-BUS. È un'ottima aggiunta alla tua radio di superficie FLYSKY Noble NB4.

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

The FGr8B surface micro receiver adopts FLYSKY's third-generation automatic frequency hopping digital system (AFHDS 3), it is perfectly suited to their range of PL18, NB4, and NB4 Lite transmitters. It uses a single antenna bidirectional transmission system that is uniquely designed to install and output PWM/PPM, and iBUS in signals.

The FTr10 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a double-antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr10 is a small, lightweight 2.4GHz receiver that will accept a wide input voltage of between 3.5~18V, has an incredible range in interference-free open areas of up to 10km, and its unique design includes i-BUS, S-BUS, PPM, PWM, and UART data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18 radio system. With all these features it is the perfect choice for drone flying, drone racing, FPV, and other long-range applications.

The FTr4 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr4 is a small, lightweight 2.4GHz receiver that will accept an input voltage of between 3.5~8.4V, has a range in interference-free open areas of up to 500m, and its unique design includes i-BUS, S-BUS, PPM, and PWM data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18, and NB4 radio systems. With all these features it is the perfect choice for drone flying, gliding, and small fixed-wing aircraft.

The OrangeRx R615X offers true DSMX compatibility and utilizes a dual antenna system to provide true signal reception diversity. Due to the previously used IC becoming obsolete, this latest R615X receiver has been redesigned, and now offers improved range and performance. Features that have been retained are the programmable failsafe on binding, ultra-fast brown-out recovery, and wide voltage input range. As we can maintain the same low price as before, this makes the latest R615X still unbeatable value for money.

The Archer line of receivers has been enhanced further with the Plus Series, they include some exciting new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, they also feature ACCESS and ACCST D16 modes where the RF protocol is smart matched during the binding process. Another feature is a Black-Box function, which records basic flight details such as power and signal-related data.

The FrSky Plus SR8 receiver is designed for use in RC airplanes, it works as a traditional 8-Channel PWM Rx, but it also has a built-in 3-axis gyro and a 3-axis accelerometer sensor module. With the built-in sensors, the Plus SR8 will compensate for outside forces on the airplane and will enhance the stability making it easier and smoother to fly. The Plus SR8 supports multiple flight modes, Auto-level, Stabilisation, Hover, and Knife-Edge. Also available are several configuration methods, these include LUA, or the FrSky S.port Airlink+ combined with the Freelink App.

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.