Quasi pronto a volare Balsa/Schiuma (ARF)

The Bixler 1.1 is a proven platform for beginners right through to intermediate pilots. Well known for stability, the Bixler is also an excellent choice for an inexpensive FPV platform and perfect for those lazy Sunday afternoons.

This version of the Bixler 1.1 is not supplied with a motor, ESC, servos, or RC equipment, it allows you to choose yourself the components you wish to use. Whatever you are looking for, the Bixler 1.1 has it covered.

Introducendo la nostra EPP 3D MX2. Caratterizzato da un design e il layout fantastico, questo tutti fuori PPE 3D'er in grado di soddisfare i piloti 3D più ansiosi!

E 'fusoliera è torsionale molto rigido ma leggero con un sacco di spazio sotto il lungo portellone superiore per la radio e sistema di alimentazione. L'ala è un affare di un pezzo con la costruzione del PPE, un preciso profilo alare simmetrico con 2 longheroni supplementari per ridurre al minimo flessione e torsione. Le superfici di controllo sono qualcos'altro - l'ascensore, il timone e gli alettoni sono dotate di una struttura a 3 strati (Epp-Depron-PPE) rendendo per superfici rigide e NO flessione in estrema getta! Snap rotoli 'Snap' e la risposta di controllo è istantanea.

La luce - ancora rigida - cellula aggiunge fino ad un grande volando 3D 'spumeggiante'. Cascate, albanelle, giri piatti, cerchi di rotolamento questo modello ha la precisione di eseguire queste e altre mosse si può pensare!

Montaggio della cellula in un processo rapido 10-15 minuti con l'aiuto di un piccolo mezzo CA. I layout di radio e del sistema di alimentazione sono molto semplici, il lungo portellone superiore rendendo per un facile accesso.

Questo è un grande modello per il General parco di volo e 3D hardcore. Si sarà difficile rompere questo modello, ci vorranno duri colpi e tenere solo rimbalzare ogni volta!


Caratteristiche:
• materiale di EPP resistente, leggero e resistente incidente
• superfici di controllo composito Stiff PPE / Depron
• Design rivoluzionario aggiunge l'integrità strutturale e la rigidità della cellula
• leggera fornisce carico alare ottimale
• Eccezionale prestazioni acrobatiche e manovrabilità 3D.
• Design semplice permette un facile accesso Impianti e apparecchi
• Il spiccano combinazione di colori ideale per l'orientamento


Specifiche:
Apertura alare: 955 millimetri
Lunghezza: 945 millimetri
Ala Area: 15.2dm2
Peso: 550g (senza batteria)




Richiede:
sistema radio a 4 canali
2217 950-1100KV Brushless Outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / dell'elica 11x4.7
4 x servi 9g

Kit FlyCat EDF
Questo piccolo kit dura circa 4 ore per costruire e in grado di soddisfare il Jocky acceleratore in tutti noi!
Il Flycat viene fornito con 56 millimetri EDF e sarà necessario un 25A ESC & 4800kv inrunner.
Questo piano è estremamente veloce, (oltre 100 mph!), Però ancora stabile a volo lento.

Spec.
Apertura alare: 640 millimetri
Lunghezza: 800 millimetri
Peso: 290g
BESC: 25A (non incluso)
Motore: 4800kv 20-30 dimensione Inrunner (non incluso)
LiPoly: 1300mAh 11.1V 20C (non incluso)
 

Il nostro rapporto di volo.
Kit si adatta bene insieme, leggera carteggiatura delle iniziali e finali bordi necessari per rimuovere la schiuma in più. Abbiamo scelto di non rafforzare l'ala con tubi CF, che non ha ancora dimostrare di essere un problema, anche alla massima velocità di G si trasforma.
Abbiamo optato per montare il BESC essendo la zona della batteria, nel caso in cui la batteria doveva essere spostato in avanti per regolare CofG, tuttavia questo non era necessario.
EDF è stato montato sul bastone monte. Stick monte è stata accorciata, con il pezzo più utilizzato per sollevare il FES fuori il bastone per cancellare il sudario FES. 2 bulloni tenuto il ventilatore al bastone, uno prima e uno dopo le pale del ventilatore.
Primo volo.
Abbiamo mantenuto CofG 9,5 centimetri dall'apice dei venti principali bordo. Il Flycat è stato lanciato a mano a 3/4 della valvola a farfalla, accelerando rapidamente. Con nostra sorpresa è stato richiesto alcun taglio.
Il Flycat è un kit estremamente veloce di volare, e ha richiesto un sacco di ascensore a turno. Vi proponiamo di mettere l'ascensore al massimo getta. Ha bisogno di enormi quantità di ascensore durante giri!
Nel complesso un piano eccellente che vola senza problemi, anche nelle giornate di vento.
Vi suggeriamo un buon lipo pacchetto, come questo piccolo hotty sarà masticare attraverso un 1500mAh in soli 5 ​​minuti. Abbiamo usato il pacchetto 3S1P ZIPPY-R 1800mAh 22C per circa 8 voli minuto. Rispetto al pacco ZIPPY-Q che ci ha portato a breve circa 7 minuti.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.

Improving on the popular Bixler 2, this latest kit is the perfect trainer plane or inexpensive FPV platform. Attach your flight camera into the nose or canopy of the plane to enjoy First Person View while flying. The Bixler 3 kit requires a motor, ESCs, a radio system and battery. 

L'H-King Crusader 30E si basa sul classico design del bastone. Questo aereo RC elettrico può essere pilotato sia da principianti che da esperti. È realizzato in tela leggera e balsa verniciata con uno schema di colori ad alto contrasto. Il Crusader risalterà a terra e in aria nel tuo hobby club locale.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

Il Wargo Signature Edge 540T 3D è un altro incredibile aereo della serie ispirata al famoso pilota 3D Michael Wargo. L'Edge 540T è stato specificamente progettato per il volo 3D molto preciso e l'addestramento acrobatico. Michael Wargo, il pilota del nostro team ed esperto di 3D, voleva un aereo in schiuma che fosse più rigido e leggero di altri schiumosi. Ciò è stato ottenuto dalla combinazione di un telaio in balsa rigido e leggero ricoperto di schiuma EPP leggera e resistente agli urti.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.