Quasi pronto a volare Balsa/Schiuma (ARF)

Introducendo la nostra EPP 3D MX2. Caratterizzato da un design e il layout fantastico, questo tutti fuori PPE 3D'er in grado di soddisfare i piloti 3D più ansiosi!

E 'fusoliera è torsionale molto rigido ma leggero con un sacco di spazio sotto il lungo portellone superiore per la radio e sistema di alimentazione. L'ala è un affare di un pezzo con la costruzione del PPE, un preciso profilo alare simmetrico con 2 longheroni supplementari per ridurre al minimo flessione e torsione. Le superfici di controllo sono qualcos'altro - l'ascensore, il timone e gli alettoni sono dotate di una struttura a 3 strati (Epp-Depron-PPE) rendendo per superfici rigide e NO flessione in estrema getta! Snap rotoli 'Snap' e la risposta di controllo è istantanea.

La luce - ancora rigida - cellula aggiunge fino ad un grande volando 3D 'spumeggiante'. Cascate, albanelle, giri piatti, cerchi di rotolamento questo modello ha la precisione di eseguire queste e altre mosse si può pensare!

Montaggio della cellula in un processo rapido 10-15 minuti con l'aiuto di un piccolo mezzo CA. I layout di radio e del sistema di alimentazione sono molto semplici, il lungo portellone superiore rendendo per un facile accesso.

Questo è un grande modello per il General parco di volo e 3D hardcore. Si sarà difficile rompere questo modello, ci vorranno duri colpi e tenere solo rimbalzare ogni volta!


Caratteristiche:
• materiale di EPP resistente, leggero e resistente incidente
• superfici di controllo composito Stiff PPE / Depron
• Design rivoluzionario aggiunge l'integrità strutturale e la rigidità della cellula
• leggera fornisce carico alare ottimale
• Eccezionale prestazioni acrobatiche e manovrabilità 3D.
• Design semplice permette un facile accesso Impianti e apparecchi
• Il spiccano combinazione di colori ideale per l'orientamento


Specifiche:
Apertura alare: 955 millimetri
Lunghezza: 945 millimetri
Ala Area: 15.2dm2
Peso: 550g (senza batteria)




Richiede:
sistema radio a 4 canali
2217 950-1100KV Brushless Outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / dell'elica 11x4.7
4 x servi 9g

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.