Aviones

El increíble Frenzy es el todoterreno perfecto. Con lanzamientos de control reducidos, es un avión suave, estable y notablemente fácil de volar que es perfecto para principiantes o principiantes. Aumente esos lanzamientos, y con su alta relación potencia-peso en una configuración 3S, el Frenzy hace honor a su nombre. Es capaz de realizar una amplia gama de asombrosas maniobras acrobáticas y satisfará las demandas incluso del piloto acrobático más ambicioso.

A replacement wing with factory-applied decals for the 1400mm H-King Frenzy aerobatic sports plane.

A replacement vertical stabilizer with rudder, and factory-applied decals for the 1400mm H-King Frenzy aerobatic sports plane.

A replacement pair of plastic wing joiners for the 1400mm H-King Frenzy aerobatic sports plane.

A replacement main carbon wing joiner, and rear wing support for the 1400mm H-King Frenzy aerobatic sports plane.

El Durafly Me-163B ha sido diseñado para pilotos con cierta experiencia, se beneficia de un rendimiento de vuelo increíble, una gran estabilidad en todo su rango de velocidad y, al igual que la realidad, es increíblemente rápido. Las acrobacias aéreas que incluyen bucles enormes, giros verticales fuera de la vista y pases bajos muy rápidos son fáciles de lograr, pero se ralentizan y son muy estables, sin indicios de pérdida. Con la batería LiPo 2200mah 30-65C 4S recomendada y el accesorio 6x4 suministrado, puede esperar tiempos de vuelo mucho más allá de los 5 minutos y una gran cantidad de energía. Si te encanta la velocidad y los modelos muy rápidos, entonces este es para ti, el Komet Me-163 es balístico, con velocidades cercanas a las 100mph.

A replacement pre-painted fuselage for the Durafly Me-163B V2 "White 10" with tailwheel and factory-applied decals.

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted canopy/battery hatch for the Durafly Me-163B V2 "White 10" with pilot, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pair of pre-painted wing panels for the Durafly Me-163B V2 "White 10" with elevons, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted vertical stabilizer for the Durafly Me-163B V2 "White 10" with rudder, and decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted cowl for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted take-off dolly with wheels for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement spinner for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement set of decals for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement aerial, and pitot head tube for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement accessory set for the Durafly Me-163B V2 "White 10". Includes, hex-wrench, pushrods, snap links, control horns, and control horn mounting screws.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

A replacement main wing for the H-King Mini L-39 Albatros 64mm. Please note that the wing tanks are not supplied with the wing.

A replacement fuselage w/access hatch for the H-King Mini L-39 Albatros 64mm.

A replacement Horizontal and Vertical Stab for the H-King Mini L-39 Albatros 64mm.

A replacement canopy/battery hatch for the H-King Mini L-39 Albatros 64mm.

A replacement pair of tip tanks for the H-King Mini L-39 Albatros 64mm.

A replacement 64mm EDF with a 2220-3300KV brushless outrunner motor for the H-King Mini L-39 Albatros 64mm.

An upgraded nosewheel landing gear retract set for the Avios KingTwin Sport/Scale Turboprop. This upgraded assembly has been manufactured with a different composition for the plastic parts which is harder. Also, the pushrod linkage has been made of thicker, stronger steel for more durability.

The OrangeRx R615X offers true DSMX compatibility and utilizes a dual antenna system to provide true signal reception diversity. Due to the previously used IC becoming obsolete, this latest R615X receiver has been redesigned, and now offers improved range and performance. Features that have been retained are the programmable failsafe on binding, ultra-fast brown-out recovery, and wide voltage input range. As we can maintain the same low price as before, this makes the latest R615X still unbeatable value for money.

A replacement 11x7 propeller for the Durafly Gloster Gladiator Mk1.

This optional magnetic release servo for the Durafly Me-163b V2 allows you to determine when to release the take-off dolly, rather than rely on gravity. It is particularly beneficial if you operate your Me-163b off of a bumpy strip where the model may prematurely jump off of the dolly. It is simple and straightforward to install, and the servo lead is normally plugged into the assigned retract socket of your receiver. The unit is supplied with a magnet which needs to be glued into the top of the take-off dolly.

Please note:  This option part is also suitable for earlier versions of the Durafly Me-163.

Cuando Durafly lanzó el Auto-G original elevó el listón al ser el primer autogiro Plug-N-Fly del mercado, ese listón se ha elevado aún más con el Auto-G2 V2. Manteniendo la tradición Durafly, es rápido y sencillo de montar, vuela extremadamente bien, y tiene un aspecto increíble en vuelo. Las mejoras de la V2 incluyen la adición de una duradera placa de cabeza de nylon reforzado con fibra de 2mm, varillas de empuje reforzadas con fibra, un mástil principal totalmente encapsulado, un tren de aterrizaje más ancho y fuerte con grandes ruedas de espuma ligera tipo bush, y un motor con carenado, además de una electrónica interna más pequeña que da más espacio para la batería de vuelo.

A complete replacement fuselage for the Durafly Auto-G2 V2 Gyrocopter with decal.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement horizontal stabiliser with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of wooden mast supports with linkage rods and screws for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A complete replacement Auto-Start system including motor, gearbox, flexi-shaft drive, etc for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement battery hatch for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 4018 800KV brushless outrunner for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.