Cargadores y accesorios RC

XT30U Silicone Charge Lead with 4mm Banana Plugs.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

El cable adaptador ToolkitRC SC100 se utiliza para alimentar cargadores de batería de bajo voltaje u otros dispositivos con un conector de entrada XT60 desde una fuente de alimentación USB-C de hasta 100 W.

Especificaciones:
Tipo: Cable de protocolo ToolkitRC SC100 XT60~USB-C
Entrada: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Voltaje de salida: 5 ~ 20 V máx.
Corriente de salida: 5A máx.
Conector de salida: XT60
Longitud: 50cm
Peso: 35g

Utilice este adaptador para convertir un cable de carga XT-60 para la carga de baterías JST equipada.

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.

Alimentar sus artículos eléctricos compatibles con el HXT 4 mm al convertidor de toma de CC. El convertidor DC Jack tiene dos conectores jack de 2 mm (centros positivos) y es ideal para la alimentación de los cargadores o los artículos electrodomésticos y análogos.

Especificaciones:
Longitud: 210 mm
DC Jack: 2mm
Conector de la batería: 4 mm HXT

La mayoría de los paquetes de baterías de polímero de litio 7S estándar cuentan con dos puertos de equilibrio, un equilibrio plomo 4S y 3S (7S totales). Esto hace que sea difícil para cargar con la mayoría de los cargadores de batería estándar que sólo cuentan con un puerto de equilibrio.

Con este adaptador super útil que puede cargar fácilmente su batería con un cargador 7S balance de 8 ~ 10S capaces estándar que acepta enchufes de balance de JST-XH. Este adaptador lleva el 4S y 3S enchufes individuales de su paquete, y las combina con un único plug equilibrio 7S que es capaz de conectarse a la mayoría de los 8 ~ 10S cargadores con capacidad estándar.

Especificaciones:
Entrada: 1 x 4S y el tapón de equilibrio 1 x 3S JST-XH
Tapón de equilibrio 7S JST-XH: Salida
Longitud: 100 mm

HXT 4 mm al adaptador de batería T-conector del cable (2 piezas)

Con este adaptador podrá convertir una batería equipada HXT 4 mm a un T-Conector para su uso con un ESC equipado T-conector o cable de carga.

Especulación:
Peso: 7 g (cada uno)