Cargadores

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery pack whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The ToolkitRC M8D is a powerful, versatile, touch-screen unit that integrates functions such as charging, discharging, and balance management for a range of battery types. The M8D is also a dual charger, so it can charge 2 batteries at a time, and these can be different voltages and chemistries. The M8D is a DC unit only, so requires an input voltage of 10~49V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can also be connected to a suitable mains power supply.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

ToolkitRC U3 Compact 2~3S USB Type C 25W 2A balance charger is an ultra-compact palm-size balance charger, that plugs into your favorite USB mains power supply. No fancy programming with this baby, just plug it into your USB adapter, connect your 2~3S LiPo battery balance lead, switch it on, and instantly it will start a balanced charge. The charge rate is set at 2A and the LED light will glow red when charging, then change to green when the charge is complete.

Features:
• A compact, fixed-rate charger for 2~3S LiPo batteries
• Utilizes any popular USB Type-C power adapter
• The perfect companion for charging items while traveling
• Simple LED light system denotes charging and standby

Specification: 

Model NO.: P6

Smart charging: The HOTA T8 charger and checker is equipped with intelligent features to ensure safe and efficient charging of your batteries.

Hota T6 battery charger is a small size charger designed for 1-6s LiHV/Life/Lilon/Lixx/Lipo batteries . It supports DC/PD input, with DC input charging powersoared to 300W, the maximum charging current can reach 15A. It is small, safe and reliable, great for the fpv racing drone batteries.

Specification:
Max Charge Capacity: DC 500W
Charge Current: 0.1A-20.0A
Max Discharge Capacity: 15W
Discharge Current: 0.1A-1.5A
Input Voltage: DC 10-34V
Ouput Voltage: DC 1-35

Este cargador del balance Turnigy es fácil de usar, fiable y seguro para cualquier modelista. Cuenta con una protección de la carga inteligente para garantizar que las pilas no están cobrado de más y tiene supervisión en tiempo real aumentando el ciclo de vida de sus paquetes de baterías. Puede ser alimentado desde cualquier salida de 12V y cargas a 800mA. La carga es a través de la JST-XH equilibrio de plomo en su batería compatible. Compatible con todos los Turnigy, Zippy y la mayoría de otros tipos de baterías. Se puede conectar fácilmente varios de estos cargadores a la misma fuente de alimentación para cargar varios paquetes a la vez.

caracteristicas:
• Protección de carga inteligente
• 2 ~ 3S Compatible
• Cargas a través del resto plomo
• Fácil de usar, seguro y fiable
• Incluye un cable de fuente con clips de Croc

Especificaciones:
Voltaje de entrada: 11 ~ 14V
Voltaje de salida: 8,4 ~ 12,6 V DC
Corriente de salida: 800mA (Max)
Dimensiones: 74x50x25mm
Peso: 46g

¿Por qué conformarse con sólo ser capaz de cargar sus baterías 2 DJI Phantom en casa?

El cargador cargador Campo DC Quanum le permite cargar de forma rápida y fácilmente su fantasma 2 pilas en el campo desde casi cualquier fuente de energía 10 ~ 26VDC! Esto significa que la batería fácil carga de su coche o batería de arranque del camión!

Sólo tiene que conectar las pinzas de cocodrilo a la batería de arranque de su vehículo y el cable de salida de la batería Fantasma 2. El cable de salida cuenta con un enchufe protegido polaridad que impide la conexión incorrecta. Este cargador ofrece hasta 4 A de la corriente, equivalente a la de el cargador original DJI Fantasma 2 de la batería.

caracteristicas:
• Diseño compacto
• Fácil de usar
• Protección contra la inversión de polaridad
• 10 ~ voltaje de entrada 26VDC
• Salida de 12.6VDC 4A
• caso disipador de calor de aluminio proporciona una excelente refrigeración

Especificaciones:
Entrada: 10 ~ 26VDC (pinza lleva)
Salida: 12.6VDC 4A (DJI Phantom 2 enchufe de la carga compatibles)
Dimensiones de la caja: 103x76x35mm

El cargador compacto B3AC HobbyKing® ™ es ​​un sencillo y compacto cargador balanace LiPoly durante 2 ~ 3s baterías. Cuenta con construido en JST-XH puertos de tapón de equilibrio y 3 LEDs para indicar el estado de carga.

El HobbyKing® ™ B3AC hace un cargador de bolsillo ideales para mantener en su cuadro de campo.

Especificaciones:
Entrada: 110v o 240v A / C (50 / 60Hz)
Recuento de Células: 2 ~ 3s
Tipo de batería: LiPoly
Corriente de salida: 3 x 800mA
Dimensiones: 95x55x32mm

Cargar en el país en 100 / 240V o en el campo de 12v. La B6-CA se encarga de los dos!
El IMAX B6 AC-V2 es un cargador de roca sólida eso es capaz de cargar, el equilibrio y la descarga del león, de LiPo, LiFe (A123), de NiCd y NiMH.
Esto no es una falsificación. Es un B6 IMAX genuino. Nuestra tasa de fallos / rentabilidad de este cargador son extremadamente bajos.

caracteristicas:
• AC 100 ~ 240V o entrada de 12V CC
• Controlado por microprocesador
• La sensibilidad del Delta-pico
• Equilibrio de célula individual
• Li-ion, LiPo y vida capaces
• Ni-Cd y NiMH capaces
• función de almacenamiento, permite que la corriente almacenamiento seguro
• Función Plazo
• El almacenamiento de datos (Almacena hasta 5 paquetes en memoria)
• Vigilancia de la tensión de entrada. (Protege las baterías de coche en el campo)
• robo y el ciclo de la batería

Especificaciones:
Voltaje de entrada: 11 ~ 18V
Circuito de potencia: Max carga: 50W / Max de descarga: 5W
Carga Rango: 0.1 ~ 6.0A
Aprobación de la gestión actual gama: 0.1 ~ 2.0A
Células de Ni-MH / NiCd: 1 ~ 15
Poly células de Li-ion / 6: 1 ~
Voltaje de la batería Pb: 2 ~ 20V
Peso: 632g
Dimensiones: 135x144x36mm

Este cargador tiene un enchufe balance de JST-XH, lo que lo hace compatible con Zippy, HXT, TURNIGY y cualquier paquete con un adaptador JST.

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

El SKYRC IMAX B6 siempre ha sido un cargador avanzado popular, capaz de cargar, equilibrar y descargar baterías LiIon, LiPo, LiFe (A123), NiCd, NiMH y Pb, con el V2 ahora ha mejorado aún más. Está controlado por microprocesador al igual que todos los mejores cargadores y equilibrará las celdas individuales de sus baterías Li-XX y mucho más. El B6 V2 es un cargador de entrada de solo CC, requiere una entrada de CC de entre 11 ~ 18V que se puede suministrar desde una batería o una fuente de alimentación principal de CA.

La gama HOTA de cargadores / descargadores se está volviendo rápidamente reconocida por su calidad, confiabilidad y numerosas características excelentes. Este increíble cargador / descargador dual puede cargar hasta 2 x 300W, todo en un paquete pequeño que mide 111x70x45 mm y pesa solo 292g. Ofrece una gran cantidad de protección para protegerse contra daños a sí mismo oa sus paquetes de baterías, como protección de temperatura, protección de capacidad, protección inversa de entrada y salida, protección contra cortocircuitos y mucho más. Consulte el manual de usuario adjunto para obtener la lista completa de funciones y protecciones.

The ISDT Q8 packs a real punch, with the ability to charge 8 LiPo, LiIon, or LiFe cells, and 7 LiHv cells at up to a staggering 30A (1000W max). It features an up-to-date touch screen that accesses an innovative, and intuitive interface, which enables the user to reach all the advanced charging/discharging features with ease. This allows for fast, and easy programming and is perfect for novices and experts alike. The screen also gives an outstanding picture quality via its 2.4" IPS LCD screen, this also has a viewing angle of up to 178°. 

The ISDT P20 has the ability to charge 2 x 8S LiPo, LiIon, LiFe, or 7S LiHv, 12S Pb, and 16S NiMh/NiCd battery packs up to 20A and a max of 500W per channel, each channel can operate independently of the other. You can even combine both channels in parallel for synchronous balance charging at up to 35A and 800W. The display accesses an innovative, and intuitive interface, which enables the user to reach all the advanced charging features with ease. This allows for fast, and easy programming which is perfect for novices and experts alike. The screen also gives an outstanding picture quality via its 3.5" IPS LCD screen which has a wide viewing angle. 

ISDT is renowned for its ergonomically designed, small, state-of-the-art battery chargers and accessories. The K1 smart charger continues this great pedigree of efficient and user-friendly chargers.

The ISDT K1 is a simple to use, no-nonsense dual input (AC/DC) charger that can charge two battery packs simultaneously. It has the ability to charge 2 x 6S LiPo, LiIon, LiFe, or LiHV, 10S Pb, or 16S NiMh/NiCd battery packs at up to 10A. Also, each channel can operate independently of each other, meaning that two different sizes or different chemistry batteries can be charged at the same time. You can even combine both channels in parallel for synchronous balance charging to achieve even more output power. The max charging current on AC power is 100W per channel, and on DC power it is 250W per channel. The four programming keys are simple and intuitive to use in conjunction with the color LCD display screen.