Aviones

After the success of the original H-King FLYCAT 70mm EDF jet, which was a basic aileron, elevator, and throttle-only model, we now have the FLYCAT V2. This new version has an upgraded power setup with a brushless inrunner motor and Aerostar RVS G2 ESC, twin rudders, a set of pre-installed electronic retracts, and a brand-new high-viz color scheme. It retains from the V1 its stunning streamlined looks, agility, performance, and impeccable flying characteristics.

With a new more powerful setup, the 2860-2100KV brushless inrunner motor and the 12-blade EDF unit make the Flycat V2 not only quite a bit faster, but it improves the verticals and it also sounds amazing, just like a real turbine, especially when doing fast, high-speed passes. Coupled with the motor and EDF unit is one of our Aerostar 80A RVS G2 speed controllers, this not only gives you solid reliability, it also offers you the choice of instant reverse. If you are flying from a hard runway this helps shorten the landing run quite considerably when selected after touchdown. Another feature of the FLYCAT V2 is the twin-rudders, these bring in another dimension when flying the V2. It is now able to perform even more jet-like maneuvers including falling leaves and knife-edge, etc, and they also help in the approach to landing and when flying at slower speeds. The new high-viz color scheme not only looks great, but it stands out well in the sky which helps orientation when flying big, fast aerobatic maneuvers. Last but not least on the V2 there is no need for hand-launching, it comes with a set of pre-installed grass-capable electronic retracts. These robust and reliable retracts enable smooth take-offs and landings on hard and grass runways

El Voltigeur es un artista muy conocido y lo hemos llevado al siguiente nivel. Volar el Voltigeur es un sueño, usando la batería LiPo 3S recomendada para acrobacias aéreas y vuelos deportivos que se maneja como un entrenador, dócil y extremadamente predecible, pero se transforma en una bestia 3D con esa misma batería de 3 segundos. Todo, desde círculos rodantes, cascadas, aguiluchos invertidos y licuadoras, nada detendrá al Voltigeur.

The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.

The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

The Avios Extra NG (Next Generation) from Hobbyking is a premium semi-scale Aerobatic RC Plane modeled after the latest Extra series aircraft. The full size offers improved aerodynamics, an even higher degree of manoeuvrability, and precise handling. The Avios version of this incredible airplane inherits all these features to make it a great-looking, highly aerobatic, 3D-capable machine.

This high-performance aerobatic airplane features a potent 6S power system and includes a SK3 5055-500KV motor, Aerostar 80A RVS G2 ESC, and a 16x6 propeller. This setup gives you an incredible high power-to-weight ratio. High-torque, high-voltage, metal-geared 30g Turnigy 30/7-DHV digital servos are used throughout. These have excellent resolution and centering so that your exact transmitter inputs are conveyed directly to the control surfaces for precise control in all types of extreme manoeuvres. Also included are a pair of bolt-on "Side Force Generators" for increased side area, which makes for enhanced and stable knife-edge flying - a hallmark of the Extra NG design.

El Durafly SlowPoke es un modelo de espuma EPO de diseño clásico. Además del diseño de vuelo fácil del SlowPoke, Durafly ha agregado algunas ruedas más grandes para que sea aún más fácil despegar y aterrizar en una amplia variedad de campos. Un gran avión para su primer avión de cola de ala baja o para el piloto experimentado y exigente que desea un avión de gran apariencia y fácil vuelo.

Need spare parts for your H-King Voltigeur? Use these replacement wing panels to fix your plane.

El H-King MX2 Extreme 30E es perfecto para llevar a un piloto de vuelo deportivo general a vuelo acrobático en 3D con confianza. Es liviano, tiene una potente configuración de motor sin escobillas y presenta grandes superficies de control que lo hacen ideal para volteretas animadas y tipos de vuelo extremos y enérgicos. Cosas como el vuelo estacionario, las cascadas, los aguiluchos, el filo de la navaja, los círculos rodantes y otras acrobacias aéreas extremas en 3D se hacen mucho más fáciles cuando se vuela el MX2 Extreme.

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

A replacement pre-painted wing complete with ailerons and factory-applied decals for the H-King FG-1 Corsair "Lucky Gallon".

Tras el éxito de la EFX Racer, se decidió producir una versión mini, como se suele decir, todo lo bueno también viene en frasco pequeño, así nació la MFX Racer. El MFX ha sido diseñado con los mismos estándares que sus hermanos mayores y sigue ofreciendo velocidad, fuerza, agilidad y la estabilidad que esperas de un modelo Durafly. Además, obtienes la simplicidad de montaje y la calidad que sólo un modelo EPO de Durafly puede ofrecer.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The Durafly Carbon Arcus is a sleek and beautiful F3A biplane designed to perform smooth, F3A-style pattern aerobatics and is the perfect choice for honing your aerobatic skills. It features a durable, lightweight EPO airframe with carbon reinforcement, aluminum landing gear, carbon interplane struts, and an advanced 4S motor and prop combination that offers a high power-to-weight ratio for unending verticals and incredible performance.

Flying the Arcus F3A is a dream, the long tail moment, the low wing loading, and the abundance of power give you a stable and predictable airplane. Take-offs require very little rudder input, rolls are crisp and axial, and loops can be as large as you wish. The large propeller provides ample braking action in the downlines to avoid overspeeding, and if you enjoy flying knife-edge, then the Arcus II performs this with ease. No roll or pitch coupling here, just apply a touch of rudder, control the throttle to hold your line, and the Arcus will knife edge until the cows come home. Finally, when the time comes, throttle back, and the Carbon Arcus settles into a nice sink rate for a perfect 3-point landing every time.

El H-King Viper 64 es asequible, muy estable, y tiene cualidades de manejo predecibles, por lo que es la elección ideal para su primera aventura en el vuelo de jets EDF. Tiene un aspecto impresionante, y el rendimiento en su configuración 6S le da un fantástico giro de velocidad y la capacidad de realizar grandes maniobras de estilo jet, esto lo convierte también en el jet deportivo perfecto para el piloto RC más experimentado. El H-King Viper 64 está basado en un pequeño avión biplaza de construcción casera diseñado por la Viper Aircraft Corporation en Estados Unidos a finales de los 90.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

Tras el éxito de la EFX Racer, se decidió producir una versión mini, como se suele decir, todo lo bueno también viene en frasco pequeño, así nació la MFX Racer. El MFX ha sido diseñado con los mismos estándares que sus hermanos mayores y sigue ofreciendo velocidad, fuerza, agilidad y la estabilidad que esperas de un modelo Durafly. Además, obtienes la simplicidad de montaje y la calidad que sólo un modelo EPO de Durafly puede ofrecer.

Con un número mínimo de piezas y tiempo de montaje, el MFX Racer simplemente se sujeta y atornilla en menos tiempo del que se tarda en cargar una batería. El MFX Racer en su configuración de 4S es rápido, pero aún así se siente excepcionalmente estable y da al piloto esa sensación de bloqueo. Sin embargo, a diferencia de la mayoría de las máquinas de velocidad, también tiene un manejo excepcionalmente bueno a baja velocidad. Con su control de 4 canales, el MFX Racer es también muy acrobático, con grandes bucles, rollos rápidos, filo de cuchillo, snaps, y giros, el MFX Racer puede hacer todo y más, ¡su único límite eres tú, el piloto! El MFX tiene 2 opciones de punta de ala (ambas se suministran en la caja), una opción estándar de 815mm, o la opción de ala recortada de 715mm. La configuración de ala estándar da una tasa de ascenso mucho mejor, mientras que la configuración de ala recortada aumenta dramáticamente la tasa de alabeo.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

Este pequeño kit de toma alrededor de 4 horas para construir y satisfará el jocky del acelerador en todos nosotros!

El Flycat 56mm viene con EDF y se necesita un ESC 25A y 4800kv Inrunner.

Este plano es extremadamente rápido, (más de 100 mph!), Sin embargo sigue siendo estable en vuelo lento.

Especulación.
Envergadura: 640mm
Longitud: 800 mm
Peso: 290 g
BESC: 25A (no incluido)
Motor: 20-30 4800kv tamaño Inrunner (no incluido)
Lipo: 1300mAh 11.1v 20C (no incluido)

Necesario.
Motor & ESC
3 x Servo 9g
5 o 10 minutos epoxi (Araldite)
1 x Servo Y plomo
plomo 1 x Servo Extensión
12 AWG alambre de silicio (20cm por el motor para ESC)
la batería lipo 1300mah 11.1v 20C
Su propio receptor y el transmisor

Nuestro informe de vuelo.

Kit encaja bien, ligero lijado de bordes anterior y posterior requeridos para eliminar la espuma adicional. Elegimos para no reforzar el ala con tubos CF, que didnt llegar a ser un problema, incluso a plena velocidad alta G gira.

Nos decidimos a montar el BESC siendo el área de la batería, en caso de que la batería necesaria para mover hacia adelante para ajustar CofG, sin embargo, esto no era necesario.

EDF se montó en el palo monte. montaje palo se acorta, con la pieza extra que se usa para elevar el FED de la palanca para desactivar el FED mortaja. 2 pernos a cabo la unidad de ventilación al palo, una antes y otra después de las aspas del ventilador.

Primer vuelo.

Hemos mantenido CofG 9,5 cm desde el ápice de las alas de borde de ataque. El Flycat se puso en marcha mano a 3/4 de gas, acelere rápidamente. Para nuestra sorpresa, no era necesario recorte.

El Flycat es un kit muy rápido para volar, y requiere una gran cantidad de ascensor en los giros. Se aconseja poner el ascensor en lanza máximo. Se necesita una inmensa cantidad de ascensor durante los giros!

En general un excelente plano que vuela sin problemas, incluso en días de viento.

Sugerimos un buen paquete de lipo, como este hotty masticar a través de un 1500mAh en sólo 5 minutos. Se utilizó el paquete de 3S1P ZIPPY-R 1800mAh 22C por alrededor de 8 vuelos minuto. En comparación con el paquete ZIPPY-Q que nos trajo corta en unos 7 minutos.

Súper Kinetic - Reemplazo de montaje del motor

Súper Kinetic - Sustitución del pabellón

Súper Kinetic - Control de la sustitución de cables - Acero (con el balón de Enlace)

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

A replacement AVIOS Extra 330LX V2 left-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 right-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 horizontal stabilizer with hinged elevator and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 vertical stabilizer with hinged rudder and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.