Tutte le Riceventi

Walkera F210 da corsa Quad - DEVO-RX713 Ricevitore

Parte No: F210-Z-25

In the world of racing drones the requirements are for small and light weight components. The FS-A8S receiver fits these requirements superbly, being only 20x14x5.3mm and 1.2g.

The FS-A8S is built for use in multi-rotor drones and is a 1-way receiver (no telemetry). It uses the extremely stable AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 18 channels.

 This is an excellent receiver to add to your Turnigy Evolution, Turnigy i6S and Turnigy i10 radios.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Designed with space-saving and light weight in mind to fit into the smallest of drones, Frsky's XM+ Micro Ultra-Light 16 Channel receiver is no lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe and up to 1km range, the XM+ is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7 and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

Designed with space-saving and lightweight in mind to fit into the smallest of drones, Frsky's XM Plus Micro Ultra-Light 16-Channel receiver is not lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe, and up to 1km range, the XM Plus is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7, and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

The Corona R6SF 2.4GHz S-FHSS compatible 6Ch receiver is designed for use with Futaba S-FHSS/FHSS 2.4GHz transmitters, such as T4YF/T6J/T6K/T8J/T10J/T14SG/T18MZ & T18SZ air systems or 3PL/T3PRKA/4PLS/T4PX or T4GRS using S-FHSS/FHSS RF protocol.

When working in "Special mode" the R6SF can output up to 8 channels using S.bus to allow greater flexibility in performance as well as a convenient way to reduce the wire count in tight installations.

The top of the range, 16 Channel X8R receiver from FrSky with 8 normal PWM outputs and no less than 16 channels on the dedicated S.BUS output. Now supplied with the 2015 firmware to compy with EU regulations.

This is an outstanding receiver for all applications and is perfect for use with the FrSky Horus, X9D and X9E Taranis transmitters, with their built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

The FrSky RX8R has been upgraded to the PRO version but retains all the old features. The new PRO version has increased precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. It also has improved anti-interference from the ignition system on combustion engines.

The Turnigy GT5 receiver is perfectly matched to work with the outstanding Turnigy GT5 6CH 2.4GHz AFHDS 2A Surface Radio to provide the most reliable link. Stop changing receivers from model to model and get an extra receiver now.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

Il ricevitore FLYSKY FGR4S utilizza il nuovo protocollo AFHDS3 (sistema digitale di salto di frequenza automatico di terza generazione). Utilizza un'antenna singola interna per la trasmissione bidirezionale ed è di dimensioni compatte e facile da installare. Può emettere segnali standard PPM e i-BUS. È un'ottima aggiunta alla tua radio di superficie FLYSKY Noble NB4.

The FrSky TW R8 is an 8-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 8 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

The FrSky TW R6 is a 6-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 6 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

Proteggere il ricevitore OrangeRx dai danni e vibrazioni con questa protezione shell.Fits silicone snuggly intorno la maggior parte dei ricevitori non satellitari ed ha fori di uscita sul retro e laterale per le antenne.

Specifiche:
Lunghezza: 44,5 millimetri
Larghezza: 25mm
Altezza: 16 millimetri
Peso: 6g

Proteggi i tuoi ricevitori arancio dai danni carburante o incidente con l'Orange RX gomma di silicone
Conchiglia. La shell fornisce protezione per il cuore del vostro modello di RC mentre anche fornendo
opzioni di fissaggio aggiuntivi. La parte posteriore del guscio ha uno slot per consentire l'uso di gancio e cinghie con occhielli di fissaggio, slot aggiuntivi sono forniti per la porta antenna e satellitare del ricevitore.

Specifiche:
Ricevitore adatto: arancione R620
Materiale: gomma silicone
Colore: Nero
Dimensioni: 46 x 25 x 17mm
Peso: 4.4g

Proteggere il ricevitore OrangeRx dai danni e vibrazioni con questa protezione shell.Fits silicone snuggly intorno la maggior parte dei ricevitori satellitari ed ha un foro di uscita sul retro per l'antenna e un cut-out sul lato per il tappo ricevitore satellitare.

Specifiche:
Lunghezza: 47,5 millimetri
Larghezza: 25mm
Altezza: 16 millimetri
Peso: 8g

Proteggi i tuoi ricevitori arancio dai danni carburante o incidente con l'Orange RX gomma di silicone
Conchiglia. La shell fornisce protezione per il cuore del vostro modello di RC mentre anche fornendo
opzioni di fissaggio aggiuntivi. La parte posteriore del guscio ha una fessura per consentire l'uso di velcro
cinghie di fissaggio, slot aggiuntivi sono previsti per l'antenna doppia.

Specifiche:
Ricevitore adatto: arancione R615
Materiale: gomma silicone
Colore: Nero
Dimensioni: 46 x 22 x 15mm
Peso: 3.5g

Proteggi i tuoi ricevitori arancio dai danni carburante o incidente con l'Orange RX gomma di silicone
Conchiglia. La shell fornisce protezione per il cuore del vostro modello di RC mentre anche fornendo
opzioni di fissaggio aggiuntivi. La parte posteriore del guscio ha una fessura per consentire l'uso di velcro
cinghie di fissaggio, slot aggiuntivi sono previsti per l'antenna doppia.

Specifiche:
Ricevitore adatto: arancione R620
Materiale: gomma silicone
Colore: Nero
Dimensioni: 43 x 25 x 16 millimetri
Peso: 5g

Pezzo di ricambio - Premium BNC cavo 1,3 m RG223 per il sistema UHF Scherrer Rx700LR Long Range

Pezzo di ricambio - RC adattatore Graupner / JR per Scherrer Rx700LR Long Range UHF Sistema