Radiocomandi e Servocomandi

Montare questo dispositivo a portata di mano da qualche parte sul modello in cui si può vedere in modo chiaro e inserirlo in un canale di riserva sul ricevitore, se nessun canale è disponibile quindi utilizzare un cavo Y. Questa unità vi darà un controllo visivo della batteria LiPoly o il ricevitore LiFe ogni volta che si accende. La facile lettura serie di LED vi mostrerà se è sicuro di portare avanti o se la batteria deve essere ricaricata.

Specifiche:
Intervallo di tensione: 6.6 ~ 7.4V
Dimensioni: 40x21x2.5mm
Peso: 4g
Lead Length: 320 millimetri
Spina: tipo JR

L'adattatore convertitore Consiglio RMILEC è la soluzione ideale per consentire un facile collegamento ad un ricevitore SBU. L'adattatore supporta T4363NB18 5V e può essere utilizzato non solo per la corrispondenza 12FG o 14MZ trasmettitori, ma possono anche essere collocati individualmente in un'altra posizione come stazione di rilancio.

La scheda viene fornito completo di hardware tra cui, connettori della batteria JST, interruttore on / off, terminali, rifiniture di pregio.

Si prega di notare: è richiesta la saldatura di interruttore on / off e terminali.

Specifiche:
Materiale: PCB
Peso: 39.65g
Dimensioni: 90 x 115 millimetri

FrSky TFR6 7ch 2.4Ghz Receiver compatibile FASST

Compatibilità:
FASST 2.4G: Air Systems (Modalità 7CH / Multi Mode)
Moduli TF FrSky: TF-8M, TF-14M


Caratteristiche:
Leggero e di piccole dimensioni
Due opzioni di impostazione sicuro selezionabile


Specifiche tecniche:
Numero di canali: 7
Di funzionamento Gamma di tensione: 3.5V ~ 10V
Range di temperatura: -10C ~ 60C
Dimensione: 37 * 22 * 8mm
Peso: 7.8g

Il Turnigy Voltage Protector aiuta a prevenire il ricevitore di cadere di sotto della sua tensione di esercizio necessaria. Questo aiuta ad eliminare "out marroni" e impedisce il ricevitore da riavviare. Essa contribuirà inoltre a ridurre il carico sul BEC del CES e ridurre la probabilità di glitch. È sufficiente collegarlo a qualsiasi canale di riserva sul ricevitore.

Tensione di funzionamento: 3.2V - 11.1V (1s ~ 3s LiPo)
Tensione sul condensatore: 16V
Capacità di memoria: 3300uf
Peso: 6.1g

Il FrSky S.BUS di PWM Decoder consente di utilizzare qualsiasi mezzo analogico standard o servi digitali con il ricevitore compatibile S.BUS. Questo elimina la necessità di utilizzare i servi specifici costoso S.Bus che consente di utilizzare i vostri modelli servi esistenti.

Dotato di 4 uscite di canale programmabili, è possibile assegnare in modo indipendente ogni servo a un canale di vostra scelta mentre solo il dover collegare un ingresso cavo dal ricevitore. Questo rende il cablaggio molto più ordinata e permette una facile creazione del vostro servo, senza la necessità di esecuzione di più prolunghe.

Questo è un grande dispositivo da utilizzare in combinazione con i nostri ricevitori compatibili arancione 7CH e 9CH S.Bus!

include:
FrSky S.BUS a PWM Decoder

Specifiche:
Uscite Canale: 4 programmabili
Canale Ouput Piombo Lunghezza: 200mm
Lunghezza totale: 350 millimetri

* Nota: FrSky Servo Canale Changer richiesto (venduto separatamente, vedi articoli correlati qui sotto) per cambiare l'assegnazione delle uscite di canale.

This incredible transmitter, receiver combo is the perfect partner for almost everything you want to control on the surface. Whether it is a large or small car or buggy, multi-function crawler, tank, or boat, the DumboRC DDF-350 will handle them all and more. The amount of features is phenomenal, here are just a few: It supports complex tank mixing, real-time voltage telemetry up to 40 meters, has 10 model memories, steering and throttle curves, head tracking function, winch control function, trainer system and a range of 350 meters. The DDF-350 is a steer-wheel type transmitter with a foam grip for non-slip driving and a trigger for throttle and brake functions.

The DumboRC DDF-350  is supplied with the popular XRDC 6ch receiver. This receiver includes an LED light module which gives you features such as stop lamps, flashing lights, turn indicators, etc. The receiver is also splash-proof, making it perfect for all manner of uses and in most types of conditions.

The Turnigy TWIN X14 is a robust radio system, featuring a unique colour exclusive to HobbyKing. It comes preloaded with HobbyKing planes, ensuring a seamless setup straight out of the box. The TWIN X14 has the capability of utilizing dual 2.4GHz frequencies simultaneously on the same receiver when using the TW mode. This is different from standard active-standby redundancy solutions, as the TW active protocol ensures that both 2.4GHz frequency bands are actively being used by the internal RF module and the receiver simultaneously.

Equipped with two internal 2.4G RF antennas, the TWIN X14 offers expansive multi-directional coverage for transmitting signals. These attributes, along with the exterior antenna, make the Twin system highly reliable with less latency, higher reliability, and faster data rates. In addition to the TW mode, the TWIN X14 also supports ACCST D16 and ACCESS modes, meaning users can benefit from a wide range of compatible receiver options.

The FrSky TW R8 is an 8-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 8 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

The FrSky TW R6 is a 6-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 6 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

La radio di controllo remoto FLYSKY Paladin PL18 è progettata per il volo di precisione. È stato progettato per essere intuitivo con una potente configurazione touchscreen. Il Paladin è dotato di 18 canali e del protocollo AFHDS 3. Ci sono sei tipi di modelli tra cui scegliere tra aeroplani, elicotteri, alianti, ala a delta, multicotteri e veicoli di ingegneria che creano una radio davvero versatile. Il pacchetto include anche due ricevitori, l'FTr10 e l'FTr16.

The FLYSKY Paladin PL18 Remote Control Radio is designed for precision flying. It was engineered to be intuitive with a powerful touch screen setup. The Paladin comes with 18 channels and AFHDS 3 protocol. There are six model types to choose from Airplane, Helicopter, Glider, Delta Wing, Multicopter, and Engineering Vehicles making for a truly versatile Radio. The package also comes with two receivers, the FTr10 and FTr16s.

FrSky X-Lite Pro è una versione aggiornata di X-Lite. X-Lite Pro offre tutti i vantaggi del design X-Lite con le caratteristiche delle radio tradizionali di dimensioni standard. Ora viene fornito con il vantaggio aggiuntivo del protocollo ACCESS (Advanced Communication Control, Elevated Spread Spectrum) di nuova concezione.

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

The FGr8B surface micro receiver adopts FLYSKY's third-generation automatic frequency hopping digital system (AFHDS 3), it is perfectly suited to their range of PL18, NB4, and NB4 Lite transmitters. It uses a single antenna bidirectional transmission system that is uniquely designed to install and output PWM/PPM, and iBUS in signals.

The FTr10 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a double-antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr10 is a small, lightweight 2.4GHz receiver that will accept a wide input voltage of between 3.5~18V, has an incredible range in interference-free open areas of up to 10km, and its unique design includes i-BUS, S-BUS, PPM, PWM, and UART data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18 radio system. With all these features it is the perfect choice for drone flying, drone racing, FPV, and other long-range applications.

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

The FTr4 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr4 is a small, lightweight 2.4GHz receiver that will accept an input voltage of between 3.5~8.4V, has a range in interference-free open areas of up to 500m, and its unique design includes i-BUS, S-BUS, PPM, and PWM data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18, and NB4 radio systems. With all these features it is the perfect choice for drone flying, gliding, and small fixed-wing aircraft.

The OrangeRx R615X offers true DSMX compatibility and utilizes a dual antenna system to provide true signal reception diversity. Due to the previously used IC becoming obsolete, this latest R615X receiver has been redesigned, and now offers improved range and performance. Features that have been retained are the programmable failsafe on binding, ultra-fast brown-out recovery, and wide voltage input range. As we can maintain the same low price as before, this makes the latest R615X still unbeatable value for money.

The best just got better, the RADIOMASTER TX16S MKII is the ultimate open-source radio. It is still a high-end, low-cost, OpenTx radio that has many great features, and this version includes the powerful long-range ELRS protocol. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, redesigned battery cover, and improved knobs and sliders that are smoother with a better center ident.

The TX16S MKII transmitter supports EdgeTX and OpenTX open source firmware which is fully supported by the OpenTX development team. RADIOMASTER works closely with the EdgeTX team to develop and optimize the user experience and will continue to ensure that the concept and standards are carried forward into the future. The TX16S MKII is available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

The best just got better, the RADIOMASTER TX16S MKII is the ultimate open-source radio. It is still a high-end, low-cost, OpenTx radio that has many great features, and this version includes the powerful long-range ELRS protocol. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, redesigned battery cover, and improved knobs and sliders that are smoother with a better center ident.

The TX16S MKII transmitter supports EdgeTX and OpenTX open source firmware which is fully supported by the OpenTX development team. RADIOMASTER works closely with the EdgeTX team to develop and optimize the user experience and will continue to ensure that the concept and standards are carried forward into the future. The TX16S MKII is available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

The FrSky FLVS ADV sensor is designed to measure the battery voltage of 2S~8S Li-Po batteries at 0.01V voltage resolution. The data can be transmitted via the F.Port or Smart Port (S.Port) of telemetry-enabled receivers such as the FrSky X8R, X6R, X4R, etc to compatible transmitters, such as the Taranis or other OpenTx radios. This is an obvious choice for accurate measurement of large-capacity Li-Po batteries.

FrSky has enhanced the performance and capability of its original sensors, resulting in the development of the new ADVANCE (ADV) series. All ADV sensors fully support the FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with an FBUS-capable receiver which further simplifies model builds.