Sistemi di Alimentazione

Quality wire and connectors used on all Servo Lead Extensions. Comes with male to male connections. Ideal for connecting your receiver to the multirotor control board.

Quality wire and connectors used on all Servo Lead Extensions. Great for larger planes with servos that experience high loads.

Quality wire and connectors used on all Servo Lead Extensions. Great for larger planes with servos that experience high loads.

JST-SH Servo Plug Set for Futaba style terminals. These gold plated JST-SH plug kits are a must-have for any RC enthusiast, there will be a time when you strip out a wire from your servo plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets each of both male and female connectors to give you both options.

These are good quality lightweight extension leads with a JR style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

These are good quality lightweight extension leads with a Futaba style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

These are good quality lightweight extension leads with a Futaba style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

These are good quality lightweight extension leads with a Futaba style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

Good quality Futaba style 45cm servo extension leads with 26AWG PVC covered wire.

These are good quality lightweight extension leads with a JR style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

These are a good quality servo extension lead with the JR style male/female connectors fitted.

These are good quality twisted servo extension leads with a Futaba style male connector one end and a female connector on the other. These are ideal for connecting servos in wings or down the tail end of fuselages etc. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are good quality twisted extension leads with a Futaba style male connector on one end and a female on the other. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are good quality twisted extension leads with a Futaba style male connector on one end and a female on the other. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are good quality twisted extension leads with a JR style male connector on one end and a female on the other. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are good quality servo leads with a JR style male connector on one end only.

These are good quality lightweight extension leads with a Futaba style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

These are a good quality twisted servo lead with a JR style male connector on each end. These are ideal for connecting receivers to gyros and flight control boards etc. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are a good quality servo Y lead with the JR style 1 x male and 2 x female connectors fitted. These Y leads are perfect for running 2 servos from the one receiver servo port.

These are good quality twisted servo extension leads with a Futaba style male connector one end and a female connector on the other. These are ideal for connecting servos in wings or down the tail end of fuselages etc. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are good quality twisted leads with a Futaba style male connector on one end. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These Futaba style 30cm servo extension leads feature a retaining clip on the female end for a positive lock, perfect for those installations hidden away in wings and fuselages etc.

These are a good quality servo Y lead with the Futaba style 1 x male and 2 x female connectors fitted. These Y leads are perfect for running 2 servos from the one receiver servo port.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

The pocket sized Trackstar LED program card has been specifically designed to work with the brushed Trackstar crawler ESCs. It is very easy and intuative to use and makes the programming of the Trackstar brushed ESC's a simple matter.

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

Volantex Ranger 1600 and Phoenix 1600 Replacement 2212-1400KV Brushless Motor.

Power HD servos are reknown for build quality and reliability, the TR-4 micro digital waterproof servo is no exception. This servo is perfect for smaller models such as crawlers, buggies, boats and even water/float planes where waterproofing is necessary. The case is sealed with rubber gaskets and O rings and the gear train is metal except for one sacrificial plastic gear. This helps stop permanent damage being done to the servo in the case of a really hard knock. The servo is supplied with 2 x single arm output horns and an M3 servo horn screw.

A pair of replacement Aerostar 40A ESCs with wiring and connectors for the AVIOS KingTwin 1700.

A replacement Aerostar 3748-820KV brushless motor with mount and connectors for the AVIOS KingTwin 1700.

An excellent open carbon brush gear 540 35T motor that has been designed for, and is perfect for RC crawlers. Having the brush gear open means that maintenance, cleaning, and brush changing is a very simple task. The low 1320KV means masses of low down torque which makes it ideal for climbing steep and rough terrain at controllable low speeds.

This SH Engines R5 (Medium Cold) glow plug is perfect for .12~.36 size engines using 16~36% nitro fuels.