Sistemi di Alimentazione

servi brushless digitali, il massimo in termini di precisione e capacità di tenuta. Trackstar da Turnigy sa importanza portando una linea di servi brushless digitale per 1/8 e 1 / applicazioni per veicoli scala 10 °. Questi servi robusti presentano casi in lega, doppi alberi di uscita cuscinetti a sfera, e un treno di ingranaggi in titanio.

Per fornire le migliori prestazioni, più efficiente questi servi sono progettati per funzionare su una vasta gamma di tensioni da 6,0 fino a 7.4V. Nei test sono stati in grado di sopportare l'abuso delle corse su strada e off-road e ancora tornare per ulteriori informazioni.

Il TS-910 è un servo di dimensioni standard ideale per le applicazioni Truggy scala e monster truck 1/8 °. Includiamo bracci multipli servo diversi e un pacchetto completo di hardware di montaggio.

Specifiche:
Peso: 66g
Dimensione: 39mmx19mmx38.5mm
Coppia: 25.8kg.cm (6.0V) - 30.6kg.cm (7.4V)
Velocità: 0.16sec / 60deg (6.0V) - 0,14 sec / 60deg (7.4V)
Tensione: 6.0 ~ 7.4V
Motore: Giappone Brushless
Tipo: Digitale
Treno di ingranaggi: Titanium
Cuscinetto a sfere: cuscinetto a sfera N2
Lead Length: 300mm
Collegare: JR / Futaba

ABDS-997HTG + HV

1-0PR-ABDS-0.000.006

servi brushless digitali, il massimo in termini di precisione e capacità di tenuta. Trackstar da Turnigy sa importanza portando una linea di servi brushless digitale per 1/8 e 1 / applicazioni per veicoli scala 10 °. Questi servi robusti presentano casi in lega, doppi alberi di uscita cuscinetti a sfera, e un treno di ingranaggi in titanio.

Per fornire le migliori prestazioni, più efficiente questi servi sono progettati per funzionare su una vasta gamma di tensioni da 6,0 fino a 7.4V. Nei test sono stati in grado di sopportare l'abuso delle corse su strada e off-road e ancora tornare per ulteriori informazioni.

Il TS-920 è un servo di dimensioni standard ideale per le applicazioni di breve corso di camion e 4WD buggy 1 / 10th scala. Includiamo bracci multipli servo diversi e un pacchetto completo di hardware di montaggio.

Specifiche:
Peso: 66g
Dimensione: 39mmx19mmx38.5mm
Coppia: 10.6kg.cm (6.0V) - 13.1kg.cm (7.4V)
Velocità: 0.09sec / 60deg (6.0V) - 0,07 sec / 60deg (7.4V)
Tensione: 6.0 ~ 7.4V
Motore: Giappone Brushless
Tipo: Digitale
Treno di ingranaggi: Titanium
Cuscinetto a sfere: cuscinetto a sfera N2
Lead Length: 300mm
Collegare: JR / Futaba

Se stai cercando il servo dello sterzo migliore per il vostro 1 / breve corso di scala 10, abbiamo la cosa giusta!

Il Trackstar TS-411MG è un servo digitale di dimensioni standard con un gruppo ingranaggi di metallo, motore coreless e un tempo di transito veloce 0.09sec. A questo si aggiunge la sua eccellente prestazione e ingannato fuori sguardi, e si dispone di un eccezionale servosterzo per il prezzo!

Perfetto per il tuo SC-10 associati, Traxxas Slash, o HPI Blitz

Specifiche:
Peso: 57g
Dimensione: 39.0mmx19.5mmx38.5mm
Coppia: 9.2kg.cm (4.8V) ~ 11.1kg.cm (6.0V)
Velocità: 0.11sec / 60deg (4.8V) ~ 0.09sec / 60deg (6.0V)
Tensione: 4.8 ~ 6.0V
Tipo: Standard Digitale
Motore: Motore Coreless
Treno di ingranaggi: ingranaggi in lega
Cuscinetto a sfere: doppio cuscinetto a sfera Giappone NSK
Lead Length: 255 millimetri
Collegare: JR / Futaba

Se stai cercando il servo dello sterzo migliore per il vostro 1/8 Truggy scala, abbiamo la cosa giusta!

Il Trackstar TS-621MG è un servo digitale di dimensioni standard con un gruppo ingranaggi di metallo, motore coreless e un tempo di transito veloce 0.14sec. A questo si aggiunge la sua eccellente prestazione e ingannato fuori sguardi, e si dispone di un eccezionale servosterzo per il prezzo!

Specifiche:
Peso: 57g
Dimensione: 39.0mmx19.5mmx38.5mm
Coppia: 16.8kg.cm (4.8V) ~ 21.2kg.cm (6.0V)
Velocità: 0.16sec / 60deg (4.8V) ~ 0.14sec / 60deg (6.0V)
Tensione: 4.8 ~ 6.0V
Tipo: Standard Digitale
Motore: Motore Coreless
Treno di ingranaggi: ingranaggi in lega
Cuscinetto a sfere: doppio cuscinetto a sfera Giappone NSK
Lead Length: 255 millimetri
Collegare: JR / Futaba

The 9iMOD BLS-HV20KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV20KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than RC cars including robotics, etc.

The 9iMOD BLS-HV30KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.075sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV30KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV40KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 40kg, and a speed of 0.085sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV40KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 40kg, and a speed of 0.085sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than RC cars including robotics, etc.

The 9iMOD BLS-HV50KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 50kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV50KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 50kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV60KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 60kg, and a speed of 0.11sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV60KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 60kg, and a speed of 0.11sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV70KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you an amazing torque of 70kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD DS35MG digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 35kg, and a speed of 0.25sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.

The 9iMOD DS35MG digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 35kg, and a speed of 0.25sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 270° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.

The 9iMOD DSC55MG-180 digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The servo is waterproof to IP67 standards, and it also includes an aluminum center for heat dissipation, a high-precision magnetic encoder sensor, and a coreless motor. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 55kg, and a speed of 0.09sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.

The 9iMOD DSC55MG-270 digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The servo is waterproof to IP67 standards, and it also includes an aluminum center for heat dissipation, a high-precision magnetic encoder sensor, and a coreless motor. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 55kg, and a speed of 0.09sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 270° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.