Sistemi di Alimentazione

8kg Corona DS538HV Digital Metal Gear Servo / 0.12sec / 58g

Modello: DS538HV
Tensione di funzionamento: 6.0V / 7.4V
Corrente di funzionamento: 300mA / 400mA
Velocità di funzionamento: 0.13sec.60º / 0.12sec.60º
Coppia di stallo: 7kg.cm / 8kg.cm
Dimensione: 20X40X38.5mm
Peso: 58g
Banda morta: ≤3uSec
Viaggio di funzionamento: 40 ° / un impulso lato 400us viaggiare
Potenziometro: 5 cursore / Unità indiretta
Cuscinetto a sfera: MR106
Equipaggiamento: metallo
Filo connettore: 300mm
Range di temperatura: -20 ° C + 60c

Corona DS558HV Digital Metal Gear servo 14kg / 58g / 0,18 Sec

Modello: DS558MG
Tensione di funzionamento: 6.0V / 7.4V
Corrente di funzionamento: 300mA / 400mA
Velocità di funzionamento: 0.20sec.60º / 0.18sec.60º
Coppia di stallo: 12kg.cm / 14kg.cm
Dimensione: 20X40X38.5mm
Peso: 58g
Banda morta: ≤3uSec
Viaggio di funzionamento: 40 ° / un impulso lato 400us viaggiare
Potenziometro: 5 cursore / Direct Drive
Cuscinetto a sfera: MR106
Equipaggiamento: metallo
Filo connettore: 300mm
Range di temperatura: -20 ° C + 60c

Corona DS-239MG Digital Slim Ala servo (Metal Gear) 4,6 kg / 0.15sec / 22g

Modello: DS-239MG
Tensione di funzionamento: 4.8V / 6.0V
Corrente di funzionamento: 300mA / 400mA
Velocità di funzionamento: 0.15sec.60º / 0.14sec.60º
Coppia di stallo: 4.0kg.cm / 4.6kg.cm
Dimensione: 30X10X34.5mm
Peso: 22g
Banda morta: ≤3uSec
Viaggio di funzionamento: 40 ° / un impulso lato 400us viaggiare
Potenziometro: 3 cursore / Direct Drive
Cuscinetto a sfera: MR85x2
Equipaggiamento: metallo
Filo Connettore: 215 millimetri
Range di temperatura: -20 ° C + 60c

4.6kg Corona CS-239MG Slim-Ala Analogico Servo / 0.14sec / 22g


Spec.
Modello: CS-239MG
Tensione di funzionamento: 4.8V / 6.0V
Corrente di funzionamento: 300mA / 400mA
Velocità di funzionamento: 0.15sec.60º / 0.14sec.60º
Coppia di stallo: 4kg.cm /4.6kg.cm
Dimensioni: 30x10x34mm
Peso: 22g
Banda morta: ≤5uSec
Viaggio di funzionamento: 40 ° / un impulso lato 400us viaggiare
Potenziometro: 3 cursore / Unità indiretta
Equipaggiamento: metallo
Filo Connettore: 215 millimetri
Range di temperatura: -20 ° C + 60c

Corona CS-239HV analogico Slim Ala servo (Metal Gear) 4,6 kg / .13sec / 22g

Modello: CS-239HV
Tensione di funzionamento: 6.0V / 7.4V
Corrente di funzionamento: 300mA / 400mA
Velocità di funzionamento: 0.14sec.60º / 0.13sec.60º
Coppia di stallo: 4.0kg.cm / 4.6kg.cm
Dimensione: 30X10X34.5mm
Peso: 22g
Banda morta: ≤5uSec
Viaggio di funzionamento: 40 ° / un impulso lato 400us viaggiare
Potenziometro: 3 cursore / Direct Drive
Cuscinetto a sfera: MR85x2
Equipaggiamento: metallo
Filo Connettore: 215 millimetri
Range di temperatura: -20 ° C + 60c

Corona DS-239HV Digital Slim Ala servo (Metal Gear) 4,6 kg / .13sec / 22g

Modello: DS-239HV
Tensione di funzionamento: 6.0V / 7.4V
Corrente di funzionamento: 300mA / 400mA
Velocità di funzionamento: 0.14sec.60º / 0.13sec.60º
Coppia di stallo: 4.0kg.cm / 4.6kg.cm
Dimensioni: 30x10x34mm
Peso: 22g
Banda morta: ≤3uSec
Viaggio di funzionamento: 40 ° / un impulso lato 400us viaggiare
Potenziometro: 3 cursore / Direct Drive
Cuscinetto a sfera: MR85x2
Equipaggiamento: metallo
Filo Connettore: 215 millimetri
Range di temperatura: -20 ° C + 60c

Dimensioni: 21.3x11.5x22 mm
Tensione: 4.8V ~ 6v
Peso: 6.2g
Velocità: 0,08 sec / 60 (4.8V) 0,07 sec / 60 (6.0V)
Coppia: 0.6 kg-cm (4.8V) 0,8 kg cm (6.0V)
Lavorare Temp: -30C ~ 60C
Teflon Boccola, filo di 15cm, motore coreless
Servo braccia e vite inclusi

AVVERTIMENTO
Questi servi si possono trovare su eBay e altri negozi asiatico venditore vicino a questo prezzo, però attenzione, non contengono componenti di Taiwan / Giappone. HexTronik (i produttori di questi servi) hanno due standard, uno è in vendita locali, e l'altro è la qualità di esportazione con connettori importati e ingranaggi in resina da Taiwan e Giappone.
Il nostro HXT500 e HXT900 sono solo l'esportazione, e non costruiti per il mercato nazionale.

Perché siamo riusciti a ordinare direttamente dalla fabbrica in grandi lotti, i servi a volte può essere rosso, blu o verde, a seconda di ciò che i nostri clienti all'ingrosso richiesti. Non allarmatevi, il colore non indica che si tratta di un servo diverso.

HXT900, uno dei micro servi più famosi e con il miglior rapporto qualità-prezzo disponibili. Utilizzato da hobbisti di tutto il mondo. L'HXT900 è il servo 9g affidabile e economico.


Caratteristiche:
• Boccola in plastica
• Cavo da 25 cm
• Motore coreless
• Bracci servo e vite inclusi


Specifiche:
Dimensioni: 21x12x22 mm / 0,74x0,42x0,78 pollici
Voltaggio: 3v ~ 6v
Peso: 9,8 g / 0,39 once
Velocità: 0,12 sec / 60 (4,8 V)
Coppia: 1,6 kg-cm
Temp di lavoro: -30C ~ 60C
Ingranaggi: tipo nylon bianco


AVVERTIMENTO
Servi dall'aspetto simile possono essere trovati su eBay e altri venditori asiatici. Tuttavia, attenzione, non contengono componenti Taiwan / Giappone. HexTronik (i produttori di questi servi) ha due standard, uno è per la vendita locale e l'altro è la qualità di esportazione con connettori importati e ingranaggi in resina da Taiwan e Giappone.
I nostri HXT500 e HXT900 sono solo per esportazione e non sono costruiti per il mercato interno. Non troverai lo stesso servo di qualità per meno, ovunque!

Torque Rate: 10KG
Speed: .16sec/60deg
Input: 5~7v
Type: Digital
Gearing: Metal
Spline Count: 25
Weight: 55g
Size: 40.7 x 19.7 x 42.9mm

Turnigy TGY-811 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

Turnigy TGY-813 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

Power HD servos are reknown for build quality and reliability, the TR-4 micro digital waterproof servo is no exception. This servo is perfect for smaller models such as crawlers, buggies, boats and even water/float planes where waterproofing is necessary. The case is sealed with rubber gaskets and O rings and the gear train is metal except for one sacrificial plastic gear. This helps stop permanent damage being done to the servo in the case of a really hard knock. The servo is supplied with 2 x single arm output horns and an M3 servo horn screw.

This optional magnetic release servo for the Durafly Me-163b V2 allows you to determine when to release the take-off dolly, rather than rely on gravity. It is particularly beneficial if you operate your Me-163b off of a bumpy strip where the model may prematurely jump off of the dolly. It is simple and straightforward to install, and the servo lead is normally plugged into the assigned retract socket of your receiver. The unit is supplied with a magnet which needs to be glued into the top of the take-off dolly.

Please note:  This option part is also suitable for earlier versions of the Durafly Me-163.

The BMS-622DMG digital servo is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. Being digital, the quoted torque is not only when the servo is moving, but also the holding power when the servo arm is stationary and under load. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a silver anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-622DMG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-662MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.2kg and an excellent speed of 0.17 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a red anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-662MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-632MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.6kg and an excellent speed of 0.15 sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-632MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-622MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-622MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-380MAX is perfect for sailplanes, electric-powered gliders, small electric cars, and also as a wing servo as it is only 13mm wide. The servo has an impressive output torque of 4.7kg and an excellent speed of 0.14sec when using a 6V power source. The gear train has helical metal gears, and the ball-raced output shaft has a 25-tooth spline identical to Futaba specs. The BMS-380MAX is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The GS2010MG is a fast (0.10sec), high torque (23.5kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2010MG
Torque@5V: 21kg
Torque@6.8V: 23.5kg
Speed@5V: 0.12sec/60°
Speed@6.8V: 0.10sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3009MG is a fast (0.09sec), high torque (38kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3009MG
Torque@5V: 28.5kg
Torque@6.8V: 38kg
Speed@5V: 0.11sec/60°
Speed@6.8V: 0.09sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2505MG is a fast (0.05sec), high torque (39kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2505MG
Torque@5V: 26kg
Torque@8.4V: 39kg
Speed@5V: 0.10sec/60°
Speed@8.4V: 0.05sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3508MG is a fast (0.08sec), high torque (45kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3508MG
Torque@5V: 31kg
Torque@8.4V: 45kg
Speed@5V: 0.14sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2508MG is a fast (0.08sec), high torque (25kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD2508MG
Torque@6V: 18kg
Torque@8.4V: 25kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3511MG is a quick (0.11sec), high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3511MG
Torque@6V: 28kg
Torque@8.4V: 35kg
Speed@6V: 0.20sec/60°
Speed@8.4V: 0.11sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GC3507MG is a very fast (0.07sec), high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC3507MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.07sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GC4509MG is a very fast (0.09sec), high torque (45kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC4509MG
Torque@6V: 35kg
Torque@8.4V: 45kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.09sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GB3506MG is a very fast (0.06sec), brushless, high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No:  GB3506MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.06sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Brushless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GD2508MG is a fast (0.08sec), high torque (25kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.  The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD2508MG
Torque@6V: 18kg
Torque@8.4V: 25kg
Speed@5V: 0.13sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3511MG is a fast (0.11sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3511MG
Torque@6V: 28kg
Torque@8.4V: 35kg
Speed@6V: 0.20sec/60°
Speed@8.4V: 0.11sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g