Nuovi Oggetti
-
XFLY F-18 Twin 40mm EDF Grey PNP RC plane165,79 €Learn MoreXFly F-18 40mm EDF Jet PNP (The Hawks)
Features
- Streamlined and true-to-scale design
- Efficient twin power system setup delivering an abundance of thrust for fast climbs, rolls, loops
- Perfectly fitted landing gear design for smooth takeoff and landing
- Extended flight time of 3-8 mins when using recommended 4S 1300-2600mAh LiPo battery
- All components can be assembled quickly without glue needed
- Available in two color schemes, "Blue Angels" and "The Hawks"
Technical Specifications
- Wingspan: 705mm / 27.7in
- Length: 980mm / 38.6in
- Wing load: 82g/dm2
- Wing Area: 11.5dm2
- Flying weight: 950g
- Motor: 1413-KV5500 *2
- EDF Size: 40MM EDF 12-Blade *2
- ESC: 20A *2
- Servo: 9g servos *5
- CG: 53mm from the leading edge
- Recommended battery: 4S 1300-2600mAh
- Landing gear: Fixed main landing gear, steerable nose gear
- Ailerons: Yes
- Elevator: Yes
- Throttle: Yes
- Rudder: Yes
- Retracts: No
- Flaps: No
- Recommended Radio: 4CH
- Recommended environment: Outdoor
- Flying time: Approx. 3-8 mins
- Mounting duration: around 15 mins
- Age: 14 years +
- Skill level: Intermediate
Content
- XFly F-18 40mm EDF Jet PNP (The Hawks)
- Motor: 1413-KV5500 *2
- ECS: 20A *2
- Servos: 9g servos *5
Required
- 4-Channel radio transmitter
- 4-Channel receiver
- 4S 1300-2600mAh
- 4S Battery charger
-
XFLY F-15 Twin 40mm Desert Camo PNP RC plane165,79 €Learn MoreXFly F-15 Twin 40mm EDF Jet PNP (Desert Camo)
Description
The XFly F-15 Twin 40mm EDF 710mm Jet ARTF in Desert Camo (XF120P-B) brings streamlined, true-to-scale looks together with a capable twin power system. Scale touches such as the air inlets, cockpit detail, exhaust nozzles and full-flying horizontal stabilisers are complemented by factory-installed twin 1413-KV5500 brushless motors, twin 20A ESCs and 12-blade 40mm EDF units. On a recommended 4S LiPo, the model delivers strong thrust for fast climbs, crisp rolls and loops, while its low wing loading and full-flying stabs support confident high-alpha handling. With sensible throttle management, typical flight times are around 3–8 minutes.
The fixed main gear and steerable nose gear are precisely fitted for smooth take-offs and landings, and can be removed when you want extra speed and vertical performance. Clean, no-glue assembly means you can be flight-ready in about 15 minutes. Finished in an eye-catching Desert Camo scheme, this intermediate-friendly ARTF jet is a standout addition to any EDF hangar.
Features
- Streamlined and true-to-scale design
- Efficient twin power system setup delivering an abundance of thrust for fast climbs, rolls, loops
- Perfectly fitted landing gear design for smooth takeoff and landing
- Extended flight time of 3-8 mins when using recommended 4S 1300-2600mAh LiPo battery
- All components can be assembled quickly without glue needed
- Available in two liveries, Oregon National Guard or Desert Camo
Technical Specifications
- Wingspan: 710mm / 28in
- Length: 980mm / 38.6in
- Wing load: 95g/dm2
- Wing Area: 10dm2
- Flying weight: 950g
- Motor: 1413-KV5500 *2
- EDF Size: 40MM EDF 12-Blade *2
- ESC: 20A *2
- Servo: 9g servos *5
- CG: 78mm from the leading edge
- Recommended battery: 4S 1300-2600mAh
- Landing gear: Fixed main landing gear, steerable nose gear
- Ailerons: Yes
- Elevator: Yes
- Throttle: Yes
- Rudder: Yes
- Retracts: No
- Flaps: No
- Recommended Radio: 4CH
- Recommended environment: Outdoor
- Flying time: Approx. 3-8 mins
- Mounting duration: around 15 mins
- Age: 14 years +
- Skill level: Intermediate
Content
- XFly F-15 Twin 40mm EDF Jet PNP (Desert Camo)
- Motor: 1413-KV5500 *2
- ECS: 20A *2
- Servos: 9g servos *5
Required
- 4-Channel radio transmitter
- 4-Channel receiver
- 4S 1300-2600mAh
- 4S Battery charger
-
XFLY F-15 Twin 40mm EDF PNP RC planeSpecial Price 133,11 € Regular Price 170,39 €Learn MoreXFly F-15 Twin 40mm EDF Jet PNP (Oregon National Guard)
Description
The XFly F-15 Twin 40mm EDF 710mm Jet (ARTF) in Grey delivers an authentic scale look with impressive twin-EDF performance. Factory-installed twin 1413-KV5500 brushless motors and twin 20A ESCs, paired with a recommended 4S LiPo, provide abundant thrust for fast climbs, axial rolls, big loops and confident high-alpha flight. Low wing loading and full-flying horizontal stabs help keep handling precise and predictable for intermediate pilots.
Designed for convenience, the airframe assembles quickly without glue and includes perfectly fitted fixed landing gear with a steerable nose wheel for smooth take-offs and landings. Prefer more speed and vertical The landing gear can be removed to save weight and drag. The F-15 comes in eye-catching military-inspired liveries, making it a standout EDF RC jet in any collection.
Features
- Streamlined and true-to-scale design
- Efficient twin power system setup delivering an abundance of thrust for fast climbs, rolls, loops
- Perfectly fitted landing gear design for smooth takeoff and landing
- Extended flight time of 3-8 mins when using recommended 4S 1300-2600mAh LiPo battery
- All components can be assembled quickly without glue needed
- Available in two liveries, Oregon National Guard or Desert Camo
Technical Specifications
- Wingspan: 710mm / 28in
- Length: 980mm / 38.6in
- Wing load: 95g/dm2
- Wing Area: 10dm2
- Flying weight: 950g
- Motor: 1413-KV5500 *2
- EDF Size: 40MM EDF 12-Blade *2
- ESC: 20A *2
- Servo: 9g servos *5
- CG: 78mm from the leading edge
- Recommended battery: 4S 1300-2600mAh
- Landing gear: Fixed main landing gear, steerable nose gear
- Ailerons: Yes
- Elevator: Yes
- Throttle: Yes
- Rudder: Yes
- Retracts: No
- Flaps: No
- Recommended Radio: 4CH
- Recommended environment: Outdoor
- Flying time: Approx. 3-8 mins
- Mounting duration: around 15 mins
- Age: 14 years +
- Skill level: Intermediate
Content
- XFly F-15 Twin 40mm EDF Jet PNP (Oregon National Guard)
- Motor: 1413-KV5500 *2
- ECS: 20A *2
- Servos: 9g servos *5
Required
- 4-Channel radio transmitter
- 4-Channel receiver
- 4S 1300-2600mAh
- 4S Battery charger
-
XFLY J-65 Twin 40mm EDF Red PNP RC plane175,00 €
Learn MoreProduct Details
Description
XFly Model proudly presents the J-65 business jet — the latest addition to its acclaimed twin 40mm EDF series. Designed with a “compact yet refined” philosophy, it captures the authentic details of a real business jet, blending true-to-scale aesthetics with responsive and dynamic performance. The airframe features a full painted finish enchanced by carefully applied decals, and is equipped with dual-wheel landing gears and twin power system setup, delivering the impressive stance and authority of a full-sized aircraft.
Powered by twin high-performance 40mm 12-blade EDFs and dual 20A ESCs with reverse thrust, the J-65 delivers outstanding power on 4S LiPo batteries, enabling impressive aerobatic maneuvers such as vertical climbs, rolls and loops. Dual-wheel landing gears ensure excellent ground grip and stable, precise taxiing during takeoff and landing, and can be removed quickly for hand launch and belly landing. Assembly is quick and simple without glue required. The battery compartment accommodates 4S 1800–2600mAh LiPo batteries to achieve a flight time of 5–10 minutes. In addition to the standard red/blue livery, a plain white version is available, allowing pilots to personalize their aircraft with custom paint schemes.
Features
- 4 operable channels (Aileron, Elevator, Throttle, Rudder/Steering)
- Twin 40mm EDF power system with dual 20A ESCs featuring reverse thrust for strong and responsive performance
- Landing gears with dual wheels for improved ground handling and stable taxiing
- Battery compartment accommodates 4S 1800–2600mAh LiPo batteries, offering 5–10 minutes of flight time
- Glue-free design allowing quick assembly
- Full painted finish with detailed decals for a realistic and refined appearance
- Available in Three versions: Red, Blue, or Base White (fully painted without decals pre-applied for any further painting or customizations)
- Robust EPO construction
Technical Specifications
Wingspan 1030mm (40.6 in) Length 1087mm (42.8 in) Wing Load 72g/dm2 Wing Area 12.5dm2 Flying Weight Approx 900g (2 lb) CG (Center of Gravity) 170mm from the leading edge Drive System Two 1413-KV5000 brushless motors EDF Diameter Two 40mm (12-blade impeller) Galaxy X-4 Landing Gears Fixed main landing gears, steerable nose gear Servo Three 9g & Two 4.3g ESC Two 20A w/ reverse thrust (XT-60 battery connector) Approx Flight Time Up to 10 mins Assembly Time Approx 15 mins Recommended Battery (Not Included) 14.8V 1800mAh~2600mAh ≥35C Li-Po Content
- Airplane (most components preinstalled, some assembly required)
- User manual
Requires: - 4 channel transmitter and receiver (not included)
- 4S Li-Po battery balance charger (not included)
- Recommded 4S 1800mAh~2600mAh 35C Li-Po battery (not included)
PNP: Receiver Ready This packaging option indicates what comes included and does not mean a completely assembled item. Most onboard electronic components are pre-assembled out of the box though some assembly is still required. This packaging option does not include the radio system, battery or charger, unless noted otherwise.
What's the difference between RTF, PNP, and ARF? The main difference is what is included in the package. Since there are no set parameters for packaging options in this hobby, different manufacturers may vary their definitions of what is included.
ARF indicates that all the foam pieces along with the crucial components of aesthetic appearance are included in the package. Some on-board electronics may be included with an ARF such as the electric retracts and will be noted on the specifications of the model. Note that this packaging option is recommended for advanced individuals with knowledge in customizing their onboard electronic components or for those not intending to fly this model.
PNP indicates that all the foam pieces along with the crucial components of aesthetic appearance and electronic components are included with the exception of the battery, balance charger, and radio system (transmitter and receiver). Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for those who already own a radio system, battery and balance charger.
RTF includes all the foam pieces along with the crucial components of aesthetic appearance, electronic components, battery, balance charger and radio system unless noted otherwise. Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for beginners or first-time pilots. Be aware of balance charger accessories that are not included (wall adapters usually sold separately). Advanced models with the RTF option may or may not come with a battery or charger. Please read the ‘Package Includes’ area carefully under the item’s for clarification of what is included with the package.
-
XFLY J-65 Twin 40mm EDF Blue PNP RC plane175,00 €
Learn MoreProduct Overview
Description
XFly Model proudly presents the J-65 business jet — the latest addition to its acclaimed twin 40mm EDF series. Designed with a “compact yet refined” philosophy, it captures the authentic details of a real business jet, blending true-to-scale aesthetics with responsive and dynamic performance. The airframe features a full painted finish enchanced by carefully applied decals, and is equipped with dual-wheel landing gears and twin power system setup, delivering the impressive stance and authority of a full-sized aircraft.
Powered by twin high-performance 40mm 12-blade EDFs and dual 20A ESCs with reverse thrust, the J-65 delivers outstanding power on 4S LiPo batteries, enabling impressive aerobatic maneuvers such as vertical climbs, rolls and loops. Dual-wheel landing gears ensure excellent ground grip and stable, precise taxiing during takeoff and landing, and can be removed quickly for hand launch and belly landing. Assembly is quick and simple without glue required. The battery compartment accommodates 4S 1800–2600mAh LiPo batteries to achieve a flight time of 5–10 minutes. In addition to the standard red/blue livery, a plain white version is available, allowing pilots to personalize their aircraft with custom paint schemes.
Features
- 4 operable channels (Aileron, Elevator, Throttle, Rudder/Steering)
- Twin 40mm EDF power system with dual 20A ESCs featuring reverse thrust for strong and responsive performance
- Landing gears with dual wheels for improved ground handling and stable taxiing
- Battery compartment accommodates 4S 1800–2600mAh LiPo batteries, offering 5–10 minutes of flight time
- Glue-free design allowing quick assembly
- Full painted finish with detailed decals for a realistic and refined appearance
- Available in Three versions: Red, Blue, or Base White (fully painted without decals pre-applied for any further painting or customizations)
- Robust EPO construction
Technical Specifications
Wingspan 1030mm (40.6 in) Length 1087mm (42.8 in) Wing Load 72g/dm2 Wing Area 12.5dm2 Flying Weight Approx 900g (2 lb) CG (Center of Gravity) 170mm from the leading edge Drive System Two 1413-KV5000 brushless motors EDF Diameter Two 40mm (12-blade impeller) Galaxy X-4 Landing Gears Fixed main landing gears, steerable nose gear Servo Three 9g & Two 4.3g ESC Two 20A w/ reverse thrust (XT-60 battery connector) Approx Flight Time Up to 10 mins Assembly Time Approx 15 mins Recommended Battery (Not Included) 14.8V 1800mAh~2600mAh ≥35C Li-Po Content
- Airplane (most components preinstalled, some assembly required)
- User manual
Requires: - 4 channel transmitter and receiver (not included)
- 4S Li-Po battery balance charger (not included)
- Recommded 4S 1800mAh~2600mAh 35C Li-Po battery (not included)
PNP: Receiver Ready This packaging option indicates what comes included and does not mean a completely assembled item. Most onboard electronic components are pre-assembled out of the box though some assembly is still required. This packaging option does not include the radio system, battery or charger, unless noted otherwise.
What's the difference between RTF, PNP, and ARF? The main difference is what is included in the package. Since there are no set parameters for packaging options in this hobby, different manufacturers may vary their definitions of what is included.
ARF indicates that all the foam pieces along with the crucial components of aesthetic appearance are included in the package. Some on-board electronics may be included with an ARF such as the electric retracts and will be noted on the specifications of the model. Note that this packaging option is recommended for advanced individuals with knowledge in customizing their onboard electronic components or for those not intending to fly this model.
PNP indicates that all the foam pieces along with the crucial components of aesthetic appearance and electronic components are included with the exception of the battery, balance charger, and radio system (transmitter and receiver). Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for those who already own a radio system, battery and balance charger.
RTF includes all the foam pieces along with the crucial components of aesthetic appearance, electronic components, battery, balance charger and radio system unless noted otherwise. Most on-board electronics are pre-installed by the manufacturer. Note that this packaging option is recommended for beginners or first-time pilots. Be aware of balance charger accessories that are not included (wall adapters usually sold separately). Advanced models with the RTF option may or may not come with a battery or charger. Please read the ‘Package Includes’ area carefully under the item’s for clarification of what is included with the package.
Login and Registration Form