Caricabatterie

Perché accontentarsi di solo essere in grado di caricare le 2 batterie DJI Phantom a casa?

Il caricabatterie Quanum DC Sul campo permette a rapidamente e facilmente caricare il tuo Phantom 2 batterie al campo da qualsiasi fonte di alimentazione 10 ~ 26VDC! Questo significa che la batteria facile ricarica da auto o batteria di avviamento del camion!

Basta collegare i coccodrilli per batteria di avviamento del veicolo e il cavo di uscita alla batteria Phantom 2. Il cavo di uscita dispone di una presa protetta polarità che impedisce il collegamento improprio. Questo caricabatteria fornisce fino a 4A di corrente, equivalente a quella del caricabatteria originale DJI Phantom 2.

Caratteristiche:
• Design compatto
• Facile da usare
• inversione di polarità protetta
• 10 ~ tensione di ingresso 26VDC
• Uscita 12.6VDC 4A
• caso dissipatore in alluminio offre un eccellente raffreddamento

Specifiche:
Ingresso: 10 ~ 26VDC (coccodrillo porta)
Uscita: 12.6VDC 4A (DJI Phantom 2 spina di carica compatibile)
Caso Dimensioni: 103x76x35mm

Il B3AC Caricabatterie compatto HobbyKing® ™ è un caricatore balanace LiPoly semplice e compatto per 2 batterie ~ 3s. È dotato di costruito in JST-XH porte spina equilibrio e 3 LED per indicare lo stato di carica.

Il HobbyKing® ™ B3AC rende un caricatore ideale tascabile per mantenere nella tua casella di campo.

Specifiche:
Ingresso: 110V o 240V A / C (50 / 60Hz)
Cell Count: 2 ~ 3s
Tipo di batteria: LiPoly
Corrente di uscita: 3 x 800mA
Dimensioni: 95x55x32mm

Carica a casa 100 / 240v o in campo a 12V. La B6-AC gestisce sia!
L'IMAX B6-AC V2 è un caricatore solida roccia questo è in grado di caricare, equilibrare e scaricare Leone, LiPo, di vita (A123), NiCd e NiMH.
Non si tratta di un falso. Si tratta di un vero e proprio B6 IMAX. Il nostro tasso di difetto / ritorni su questo caricatore sono estremamente bassi.

Caratteristiche:
• CA 100 ~ 240 V o ingresso di 12 V CC
• Controllo a microprocessore
• sensibilità del Delta-picco
• bilanciamento delle celle individuali
• Li-ion, LiPo e vita capaci
• Ni-Cd e NiMH capaci
• Funzione Store, permette alla corrente l'immagazzinamento sicuro
• Funzione Termine
• Memorizzazione dei dati (memorizzare fino a 5 confezioni in memoria)
• monitoraggio della tensione di ingresso. (Protegge le batterie di automobile al campo)
• Batteria break-in e in bicicletta

Specifiche:
Tensione in ingresso: 11 ~ 18V
CIRCUITO DI POTENZA: Max carica: 50W / Max di scarica: 5W
Carica Range: 0.1 ~ 6.0A
Scarico gamma attuale: 0.1 ~ 2.0A
Celle Ni-MH / NiCd: 1 ~ 15
Li-ion / cellule Poly: 1 ~ 6
Pb tensione della batteria: 2 ~ 20V
Peso: 632g
Dimensioni: 135x144x36mm

Questo caricabatterie è dotato di una spina equilibrio JST-XH, che lo rende compatibile con Zippy, HXT, TURNIGY e le confezioni con un adattatore JST.

Questo caricabatterie equilibrio Turnigy è semplice da usare, affidabile e sicura per qualsiasi modellatore. È dotato di una protezione di carica intelligente per garantire che le batterie non sono sovraccarica e ha monitoraggio in tempo reale aumentando il ciclo di vita delle vostre batterie. Può essere alimentato da qualsiasi uscita 12V e gli oneri a 800mA. La carica è attraverso l'equilibrio di piombo JST-XH sulla batteria compatibile. Adatta a tutti Turnigy, Zippy e la maggior parte degli altri tipi di batterie. Si può facilmente collegare molti di questi caricabatterie alla stessa sorgente di alimentazione per caricare confezioni multiple in una sola volta.

Caratteristiche:
• Protezione ricarica intelligente
• 2 ~ 3S compatibile
• Oneri attraverso il cavo equilibrio
• Facile da usare, sicuro e affidabile
• Include cavo di alimentazione con le clip Croc

Specifiche:
Tensione in ingresso: 11 ~ 14V
Tensione di uscita: 8.4 ~ 12.6V DC
Corrente di uscita: 800mA (max)
Dimensioni: 74x50x25mm
Peso: 46g

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery pack whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The ToolkitRC M8D is a powerful, versatile, touch-screen unit that integrates functions such as charging, discharging, and balance management for a range of battery types. The M8D is also a dual charger, so it can charge 2 batteries at a time, and these can be different voltages and chemistries. The M8D is a DC unit only, so requires an input voltage of 10~49V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can also be connected to a suitable mains power supply.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

ToolkitRC U3 Compact 2~3S USB Type C 25W 2A balance charger is an ultra-compact palm-size balance charger, that plugs into your favorite USB mains power supply. No fancy programming with this baby, just plug it into your USB adapter, connect your 2~3S LiPo battery balance lead, switch it on, and instantly it will start a balanced charge. The charge rate is set at 2A and the LED light will glow red when charging, then change to green when the charge is complete.

Features:
• A compact, fixed-rate charger for 2~3S LiPo batteries
• Utilizes any popular USB Type-C power adapter
• The perfect companion for charging items while traveling
• Simple LED light system denotes charging and standby

Specification: 

Model NO.: P6

Smart charging: The HOTA T8 charger and checker is equipped with intelligent features to ensure safe and efficient charging of your batteries.

Hota T6 battery charger is a small size charger designed for 1-6s LiHV/Life/Lilon/Lixx/Lipo batteries . It supports DC/PD input, with DC input charging powersoared to 300W, the maximum charging current can reach 15A. It is small, safe and reliable, great for the fpv racing drone batteries.

Specification:
Max Charge Capacity: DC 500W
Charge Current: 0.1A-20.0A
Max Discharge Capacity: 15W
Discharge Current: 0.1A-1.5A
Input Voltage: DC 10-34V
Ouput Voltage: DC 1-35

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

This amazing charger/discharger can charge up to 200W on AC power and a staggering 700W on DC power all in a tiny package measuring just 108x67x60mm and weighing 410g. It offers high-efficiency power management, active PFC resonant control, short circuit protection, overload protection, over-voltage protection, over-temperature protection, and over-current protection.

Lo SKYRC IMAX B6 è sempre stato un popolare caricabatterie avanzato, in grado di caricare, bilanciare e scaricare batterie LiIon, LiPo, LiFe (A123), NiCd, NiMH e Pb, con il V2 ora è migliorato ancora. È controllato da un microprocessore come tutti i migliori caricabatterie e bilancia le singole celle delle batterie Li-XX e molto altro ancora. Il B6 V2 è un caricatore con ingresso solo CC, richiede un ingresso CC compreso tra 11 ~ 18V che può essere fornito da una batteria o da un alimentatore CA.

La gamma di caricabatterie/scaricatori HOTA sta rapidamente diventando famosa per la loro qualità, affidabilità e numerose fantastiche funzioni. Questo incredibile doppio caricatore/scaricatore può caricare fino a 2 x 300W tutto in un piccolo pacchetto che misura 111 x 70 x 45mm e pesa solo 292g. Offre un sacco di protezione per proteggersi dal danneggiamento stesso o dai pacchi batteria come protezione della temperatura, protezione della capacità, protezione dall'inversione di ingresso e uscita, protezione da cortocircuito e molto altro. Vedere il manuale utente allegato per l'elenco completo delle funzioni e delle protezioni.

The ISDT Q8 packs a real punch, with the ability to charge 8 LiPo, LiIon, or LiFe cells, and 7 LiHv cells at up to a staggering 30A (1000W max). It features an up-to-date touch screen that accesses an innovative, and intuitive interface, which enables the user to reach all the advanced charging/discharging features with ease. This allows for fast, and easy programming and is perfect for novices and experts alike. The screen also gives an outstanding picture quality via its 2.4" IPS LCD screen, this also has a viewing angle of up to 178°. 

The ISDT P20 has the ability to charge 2 x 8S LiPo, LiIon, LiFe, or 7S LiHv, 12S Pb, and 16S NiMh/NiCd battery packs up to 20A and a max of 500W per channel, each channel can operate independently of the other. You can even combine both channels in parallel for synchronous balance charging at up to 35A and 800W. The display accesses an innovative, and intuitive interface, which enables the user to reach all the advanced charging features with ease. This allows for fast, and easy programming which is perfect for novices and experts alike. The screen also gives an outstanding picture quality via its 3.5" IPS LCD screen which has a wide viewing angle. 

ISDT is renowned for its ergonomically designed, small, state-of-the-art battery chargers and accessories. The K1 smart charger continues this great pedigree of efficient and user-friendly chargers.

The ISDT K1 is a simple to use, no-nonsense dual input (AC/DC) charger that can charge two battery packs simultaneously. It has the ability to charge 2 x 6S LiPo, LiIon, LiFe, or LiHV, 10S Pb, or 16S NiMh/NiCd battery packs at up to 10A. Also, each channel can operate independently of each other, meaning that two different sizes or different chemistry batteries can be charged at the same time. You can even combine both channels in parallel for synchronous balance charging to achieve even more output power. The max charging current on AC power is 100W per channel, and on DC power it is 250W per channel. The four programming keys are simple and intuitive to use in conjunction with the color LCD display screen.