Radio Servo's

Deze digitale ultramicro-servo is perfect voor uw indoor flyer of elke andere micro RC-toepassing.

Specificaties:
Spanning: 2.5 ~ 4.8V
Snelheid: 0.07sec/60° (3.7V), 0.06sec/60° (4.2V)
Koppel: 0.095kg·cm (3.7V), 0.11kg·cm (4.2V)
Afmetingen: 16 x 8.2 x 16.5mm
Gewicht: 2.2g
Motor: kernloos
Tandwieltrein: kunststof
Type: Digitaal

De Turnigy TGY serie biedt uitstekende prestaties en kwaliteit voor een goede prijs. De TGY-4409MD digitale servo biedt nauwkeurige centrering en een ultra-duurzame metal gear aandrijflijn.

Model: TGY-4409MD
Dode band: 2us
Werken frequentie: 1520us / 330 Hz
Werkspanning: 4.8 ~ 6.0V
Werksnelheid (4.8V): 0.13sec / 60 °
Werksnelheid (6.0V): 0.11sec / 60 °
Stall koppel (4.8V): 8.65kg.cm (120,15 oz / in)
Stall koppel (6.0V): 9.45kg.cm (130,88 oz / in)
Connector kabellengte: 265mm
Afmetingen: 41x20.3x29.5mm
Gewicht: 44g

Servo Tape (Clear) 25mm x 1m

Deze geweldige servo tape is super sterk en wanneer de steun wordt verwijderd, is het helemaal duidelijk. Deze band heeft de geweldige eigenschap dat zeer kleverig en zal stevig vast uw servo's, ontvangers, snelheidscontroles en transponders om je vliegtuig, helikopter auto of boot, maar als je wilt om ze te verwijderen, ze komen recht uit zonder de servo band uit elkaar te breken plus is er geen residu dat overblijft op het oppervlak !!

Zeer schoon, zeer veilig en ongelooflijk veelzijdig.

Grootte
Breedte: 25mm
Diepte: 1mm
Lengte: 1m

Walkera F210 Racing Quad - DEVO-RX713 Receiver

Part No: F210-Z-25

Doe je servo extensie verbindingen niet meer riskeren, gebruik maken van deze servo-aansluiting keepers voor een beveiligde verbinding elke keer.

In verpakkingen van tien, deze keepers gewoon clip over de samengevoegde servo extensie verbinding en zorgt ervoor dat het kan niet per ongeluk uit elkaar worden getrokken.

Nu hoef je geen excuus voor het verliezen van een model te wijten aan een slechte of losse servo-verbinding opnieuw te hebben, wees slim en uw model te beschermen tegen een vermijdbaar ongeluk door het verkrijgen van de goedkoopste verzekering die u kunt krijgen met deze herbruikbare servo-verbinding keepers.

inclusief:
10 x Plastic Keepers

In the world of racing drones the requirements are for small and light weight components. The FS-A8S receiver fits these requirements superbly, being only 20x14x5.3mm and 1.2g.

The FS-A8S is built for use in multi-rotor drones and is a 1-way receiver (no telemetry). It uses the extremely stable AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 18 channels.

 This is an excellent receiver to add to your Turnigy Evolution, Turnigy i6S and Turnigy i10 radios.

Torque Rate: 10KG
Speed: .16sec/60deg
Input: 5~7v
Type: Digital
Gearing: Metal
Spline Count: 25
Weight: 55g
Size: 40.7 x 19.7 x 42.9mm

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Designed with space-saving and light weight in mind to fit into the smallest of drones, Frsky's XM+ Micro Ultra-Light 16 Channel receiver is no lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe and up to 1km range, the XM+ is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7 and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

The Turnigy TGY-WP23 is one of the latest standard size servos that has an aluminum center case which acts as a heatsink and gears made of titanium and steel. This servo has a digital amplifier which helps it achieve an incredible 23kg of holding power and is no slouch in the speed department either with a speed of 0.12sec.

Designed with space-saving and lightweight in mind to fit into the smallest of drones, Frsky's XM Plus Micro Ultra-Light 16-Channel receiver is not lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe, and up to 1km range, the XM Plus is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7, and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

The Corona R6SF 2.4GHz S-FHSS compatible 6Ch receiver is designed for use with Futaba S-FHSS/FHSS 2.4GHz transmitters, such as T4YF/T6J/T6K/T8J/T10J/T14SG/T18MZ & T18SZ air systems or 3PL/T3PRKA/4PLS/T4PX or T4GRS using S-FHSS/FHSS RF protocol.

When working in "Special mode" the R6SF can output up to 8 channels using S.bus to allow greater flexibility in performance as well as a convenient way to reduce the wire count in tight installations.

The Power HD LW-20MG is the latest servo that features an all-aluminum case, copper and aluminum gears, a powerful coreless motor and it pulls up to 20kg-cm of torque at a speed of 0.16s. The standard sized servo is also waterproof making this a great servo for crawlers, 1/8 scale trucks and buggies. It comes black anodized and with laser-etched graphics.

The top of the range, 16 Channel X8R receiver from FrSky with 8 normal PWM outputs and no less than 16 channels on the dedicated S.BUS output. Now supplied with the 2015 firmware to compy with EU regulations.

This is an outstanding receiver for all applications and is perfect for use with the FrSky Horus, X9D and X9E Taranis transmitters, with their built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

The FrSky Taranis Q X7S is the next step on from the original Taranis Q X7 and comes in a stunning blue case. It also keeps all the cool features of the Taranis Q X7 but adds even more stunning features. It still has all the usual Taranis features in this radio such as Receiver Signal Strength Indicator (RSSI) alerts, Real-time Flight Data Logging and receiver matching.

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

Turnigy T6A-V2 2.4GHz system is an entry level transmitter offering the reliability of the 2.4GHz signal technology and a receiver with 6 channels. This AFHDS transmitter requires a PC to modify any of the channel variables including mixing and servo reversing.

Turnigy T6A-V2 2.4GHz system is an entry-level transmitter offering the reliability of the 2.4GHz signal technology and a receiver with 6 channels. This AFHDS transmitter requires a PC to modify any of the channel variables including mixing and servo reversing.

Turnigy TGY-811 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

Turnigy TGY-813 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

De FLYSKY Paladin PL18 afstandsbedieningsradio is ontworpen voor precisievliegen. Het is ontworpen om intuïtief te zijn met een krachtige touchscreen-installatie. De Paladin wordt geleverd met 18 kanalen en het AFHDS 3-protocol. Er zijn zes modeltypes om uit te kiezen vliegtuig-, helikopter-, zweefvliegtuig-, deltavleugel-, multicopter- en technische voertuigen, wat zorgt voor een echt veelzijdige radio. Het pakket wordt ook geleverd met twee ontvangers, de FTr10 en FTr16s.

The FLYSKY Paladin PL18 Remote Control Radio is designed for precision flying. It was engineered to be intuitive with a powerful touch screen setup. The Paladin comes with 18 channels and AFHDS 3 protocol. There are six model types to choose from Airplane, Helicopter, Glider, Delta Wing, Multicopter, and Engineering Vehicles making for a truly versatile Radio. The package also comes with two receivers, the FTr10 and FTr16s.

De FrSky X-Lite Pro is een verbeterde versie van de X-Lite. De X-Lite Pro biedt alle voordelen van het X-Lite-ontwerp met de kenmerken van traditionele full-size radio's. Het komt nu met het extra voordeel van het nieuw ontwikkelde ACCESS-protocol (Advanced Communication Control, Elevated Spread Spectrum).

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.

Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together.