Radio Servo's

Compatibel met Futuba Fasst zenders de Corona R14FA biedt een betaalbaar alternatief voor Futaba radio-gebruikers.

specs:
Stroomverbruik:
70mA @ FASST 7ch modus normaal en 110 mA max,
80mA @ FASST multi-channel modus normaal en 110 mA max
Operating Voltage: 4.0 ~ 10V
Wachttijd:
7ms voor hoge snelheid PPM (HS), 14ms voor lage snelheid PPM (LS) @ FASST multi-channel-modus,
8ms voor hoge snelheid PPM (HS), 16ms voor lage snelheid PPM (LS) @ FASST 7ch modus
Gevoeligheid: ~ -96dBm
Fail Safe: Ja
Grootte: 53x37x16mm
Gewicht: 22g
Antenne lengte: 136mm

Verenigbaarheid:
FUTABA FASST 2.4GHz zenders
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG

Monteer dit handige apparaat ergens op uw model waarin duidelijk kan worden gezien en sluit deze aan op een extra kanaal op je ontvanger, als er geen kanaal beschikbaar gebruik dan een Y-lood. Deze eenheid zal u een visuele controle van uw LiPoly of het leven ontvanger batterij elke keer dat u op te geven. De eenvoudig te reeks van LED's leest zul je zien of het veilig is om door te gaan of als de batterij moet worden opgeladen.

specs:
Voltage Range: 6.6 ~ 7.4V
Afmetingen: 40x21x2.5mm
Gewicht: 4g
Lead Lengte: 320mm
Plug: het type JR

De RMILEC Adapter Converter van Commissarissen is de perfecte oplossing voor eenvoudige aansluiting op een SBUS ontvanger mogelijk te maken. De T4363NB18 adapter ondersteunt 5V voeding en kan worden gebruikt niet alleen voor het afstemmen 12FG of 14MZ zenders maar ook afzonderlijk in een andere locatie als een relaisstation worden geplaatst.

Het bord wordt geleverd met hardware, waaronder, JST batterijconnectoren, aan / uit schakelaar, terminals, en het toebehoren geleverd.

Let op: het solderen van de aan / uit schakelaar en terminals nodig.

specs:
Materiaal: PCB
Gewicht: 39.65g
Afmetingen: 90 x 115mm

FrSky TFR6 7ch 2.4Ghz ontvanger FASST Compatible

Verenigbaarheid:
FASST 2.4G: Air Systems (7CH Mode / Multi Mode)
FrSky TF Modules: TF-8M, TF-14M


Kenmerken:
Licht van gewicht en de geringe afmetingen
Keuze uit twee failsafe instelmogelijkheden


specificaties:
Aantal kanalen: 7
Bedrijfsspanningsbereik: 3.5V ~ 10V
Bedrijfstemperatuurbereik: -10C ~ 60C
Afmetingen: 37 * 22 * 8mm
Gewicht: 7,8 g

De Turnigy Voltage Protector helpt voorkomen dat uw ontvanger uit te laten vallen onder het vereiste werkspanning. Dit helpt om "brown-outs" te elimineren en voorkomt dat de ontvanger van het rebooten. Het zal ook helpen verminderde de belasting op uw ESC BEC en de kans op glitching verminderen. Gewoon de stekker in om eventuele reserve-kanaal op je ontvanger.

Werkend Voltage: 3.2V - 11.1V (1s ~ 3s LiPo)
Condensator voltage: 16v
Opslagcapaciteit: 3300uf
Gewicht: 6,1 g

De FrSky S.BUS PWM Decoder kunt u een standaard analoge of digitale servo's met je S.BUS compatibele ontvanger te gebruiken. Dit elimineert de noodzaak voor het gebruik van dure S.BUS specifieke servo's zodat u uw modellen bestaande servo's gebruiken.

Met 4 programmeerbare kanaal uitgangen, kunt u onafhankelijk van elkaar elke servo toewijzen aan een kanaal van uw keuze, terwijl slechts met één ingang lood aansluiten van uw ontvanger. Dit maakt uw bedrading veel meer netjes en zorgt voor eenvoudige instelling van uw servo's zonder de noodzaak voor het uitvoeren van meerdere verlengsnoeren.

Dit is een geweldig apparaat om te gebruiken in combinatie met onze Oranje 7CH en 9CH S.BUS compatibele ontvangers!

inclusief:
FrSky S.BUS PWM Decoder

specs:
Kanaal Uitgangen: 4 programmeerbare
Channel Ouput Lead Lengte: 200mm
Totale lengte: 350mm

* Opmerking: FrSky Servo Channel Changer vereist (afzonderlijk verkrijgbaar, zie gerelateerde items hieronder) tot toewijzing van kanaal uitgangen te wijzigen.

This incredible transmitter, receiver combo is the perfect partner for almost everything you want to control on the surface. Whether it is a large or small car or buggy, multi-function crawler, tank, or boat, the DumboRC DDF-350 will handle them all and more. The amount of features is phenomenal, here are just a few: It supports complex tank mixing, real-time voltage telemetry up to 40 meters, has 10 model memories, steering and throttle curves, head tracking function, winch control function, trainer system and a range of 350 meters. The DDF-350 is a steer-wheel type transmitter with a foam grip for non-slip driving and a trigger for throttle and brake functions.

The DumboRC DDF-350  is supplied with the popular XRDC 6ch receiver. This receiver includes an LED light module which gives you features such as stop lamps, flashing lights, turn indicators, etc. The receiver is also splash-proof, making it perfect for all manner of uses and in most types of conditions.

The Turnigy TWIN X14 is a robust radio system, featuring a unique colour exclusive to HobbyKing. It comes preloaded with HobbyKing planes, ensuring a seamless setup straight out of the box. The TWIN X14 has the capability of utilizing dual 2.4GHz frequencies simultaneously on the same receiver when using the TW mode. This is different from standard active-standby redundancy solutions, as the TW active protocol ensures that both 2.4GHz frequency bands are actively being used by the internal RF module and the receiver simultaneously.

Equipped with two internal 2.4G RF antennas, the TWIN X14 offers expansive multi-directional coverage for transmitting signals. These attributes, along with the exterior antenna, make the Twin system highly reliable with less latency, higher reliability, and faster data rates. In addition to the TW mode, the TWIN X14 also supports ACCST D16 and ACCESS modes, meaning users can benefit from a wide range of compatible receiver options.

The FrSky TW R8 is an 8-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 8 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

The FrSky TW R6 is a 6-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 6 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

Walkera F210 Racing Quad - DEVO-RX713 Receiver

Part No: F210-Z-25

In the world of racing drones the requirements are for small and light weight components. The FS-A8S receiver fits these requirements superbly, being only 20x14x5.3mm and 1.2g.

The FS-A8S is built for use in multi-rotor drones and is a 1-way receiver (no telemetry). It uses the extremely stable AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 18 channels.

 This is an excellent receiver to add to your Turnigy Evolution, Turnigy i6S and Turnigy i10 radios.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Designed with space-saving and light weight in mind to fit into the smallest of drones, Frsky's XM+ Micro Ultra-Light 16 Channel receiver is no lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe and up to 1km range, the XM+ is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7 and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

Designed with space-saving and lightweight in mind to fit into the smallest of drones, Frsky's XM Plus Micro Ultra-Light 16-Channel receiver is not lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe, and up to 1km range, the XM Plus is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7, and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

The Corona R6SF 2.4GHz S-FHSS compatible 6Ch receiver is designed for use with Futaba S-FHSS/FHSS 2.4GHz transmitters, such as T4YF/T6J/T6K/T8J/T10J/T14SG/T18MZ & T18SZ air systems or 3PL/T3PRKA/4PLS/T4PX or T4GRS using S-FHSS/FHSS RF protocol.

When working in "Special mode" the R6SF can output up to 8 channels using S.bus to allow greater flexibility in performance as well as a convenient way to reduce the wire count in tight installations.

The top of the range, 16 Channel X8R receiver from FrSky with 8 normal PWM outputs and no less than 16 channels on the dedicated S.BUS output. Now supplied with the 2015 firmware to compy with EU regulations.

This is an outstanding receiver for all applications and is perfect for use with the FrSky Horus, X9D and X9E Taranis transmitters, with their built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.