Energie Systeem

This is the perfect protection for the transport and storage of your precious R/C transmitter. It features lightweight construction, yet is rigid enough to protect your transmitter during transportation. It has dual zippers, a removable carrying strap, and pockets inside to accommodate a wide variety of accessories such as a spare TX battery, charger, neck strap, and much more!

Two self-adhesive foam blocks are included for the inside so you can adjust these as necessary to accommodate your specific transmitter. Also, these include hook & loop backing so they can be moved to whichever position you require very quickly and easily. A hook & loop strap is integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g
Color: Black/Orange

The BMS-622DMG digital servo is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. Being digital, the quoted torque is not only when the servo is moving, but also the holding power when the servo arm is stationary and under load. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a silver anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-622DMG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-662MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.2kg and an excellent speed of 0.17 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a red anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-662MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-632MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.6kg and an excellent speed of 0.15 sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-632MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-622MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-622MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-380MAX is perfect for sailplanes, electric-powered gliders, small electric cars, and also as a wing servo as it is only 13mm wide. The servo has an impressive output torque of 4.7kg and an excellent speed of 0.14sec when using a 6V power source. The gear train has helical metal gears, and the ball-raced output shaft has a 25-tooth spline identical to Futaba specs. The BMS-380MAX is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

A replacement standard rotation 9g metal geared servo with 100mm servo lead for XFLY models.

A replacement standard rotation 9g metal geared servo with 200mm servo lead for XFLY models.

A replacement reverse rotation 9g metal geared servo with 200mm servo lead for XFLY models.

This incredible transmitter, receiver combo is the perfect partner for almost everything you want to control on the surface. Whether it is a large or small car or buggy, multi-function crawler, tank, or boat, the DumboRC DDF-350 will handle them all and more. The amount of features is phenomenal, here are just a few: It supports complex tank mixing, real-time voltage telemetry up to 40 meters, has 10 model memories, steering and throttle curves, head tracking function, winch control function, trainer system and a range of 350 meters. The DDF-350 is a steer-wheel type transmitter with a foam grip for non-slip driving and a trigger for throttle and brake functions.

The DumboRC DDF-350  is supplied with the popular XRDC 6ch receiver. This receiver includes an LED light module which gives you features such as stop lamps, flashing lights, turn indicators, etc. The receiver is also splash-proof, making it perfect for all manner of uses and in most types of conditions.

Description:
Item NO.: CYS-S8220
Description : 9g digital servo for 450 classes helicopter
Size : 23*12*25.4MM
Torque : 1.8Kg.cm ~ 2.5Kg.cm
Speed : 0.11sec ~ 0.09sec/60 degree
Voltage : 4.8Volts ~6.0Volts
Weight : 14± 1 g

Description:
Item NO.: CYS-S3019 MG
Description : 17G Digital servo with metal gear for airplane
Size : 37.66*13.3*33.8MM
Torque : 3.0Kg.cm ~ 3.4Kg.cm
Speed : 0.13sec ~ 0.09sec/60 degree
Voltage : 6.0Volts ~7.4Volts
Weight : 23± 1 g

The 22 series digital servo CYS-S2213 is designed to deliver top-notch performance in a sleek package. Outfitted with high-strength titanized gears, this servo offers exceptional durability and smooth gear engagement. It provides a powerful torque output of 13kg.cm, ideal for handling challenging tasks with ease. The servo is also built for speed, achieving a rapid transit time of 0.11sec/60º for responsive and accurate control.

Description:
Item NO.: CYS-BLS5507 Low profile digital servo
Description : Brushless drifted servo motor for 1/10 RC car
Size : 40*20*25.2MM
Torque : 7.0Kg.cm ~ 8.0Kg.cm
Speed : 0.06sec ~ 0.05sec/60 degree
Voltage : 6.0Volts ~7.4Volts
Weight : 43± 1 g

Description:
Item NO.: CYS-S0150 15Kg standard size servo
Description : 15Kg servo motor for rc car-rc boat-rc plane
Size : 40.5*20*38MM
Torque : 14Kg.cm ~ 15Kg.cm
Speed : 0.17sec ~ 0.15sec/60 degree
Voltage : 6.0Volts ~7.4Volts
Weight : 58± 1g

The Turnigy TWIN X14 is a robust radio system, featuring a unique colour exclusive to HobbyKing. It comes preloaded with HobbyKing planes, ensuring a seamless setup straight out of the box. The TWIN X14 has the capability of utilizing dual 2.4GHz frequencies simultaneously on the same receiver when using the TW mode. This is different from standard active-standby redundancy solutions, as the TW active protocol ensures that both 2.4GHz frequency bands are actively being used by the internal RF module and the receiver simultaneously.

Equipped with two internal 2.4G RF antennas, the TWIN X14 offers expansive multi-directional coverage for transmitting signals. These attributes, along with the exterior antenna, make the Twin system highly reliable with less latency, higher reliability, and faster data rates. In addition to the TW mode, the TWIN X14 also supports ACCST D16 and ACCESS modes, meaning users can benefit from a wide range of compatible receiver options.

A semi-rigid carry case that will protect your Turnigy  X14 or X14S transmitter. This is a genuine and well-made FrSky product that includes pre-cut foam inserts to fit your transmitter perfectly.

Specs:
Type: Turnigy  EVA Soft Carry Case
Suits: FrSky X14 & X14S transmitters
Color: Black

Included:
1 x Turnigy EVA Soft Carry Case for X14/X14S Transmitters (Black)

A strong, well-made neck strap that suits a multitude of transmitters including the FrSky X14 series and many, many more. It includes the Turnigy logo, a quick-release connector, and a sliding, clasp to hook onto the transmitter neck strap attachment.

The FrSky TW R8 is an 8-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 8 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

The FrSky TW R6 is a 6-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 6 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

A replacement 13g metal-geared servo for the Avios Kobuz Sports-Scale Aerobatic Glider. Used for the ailerons, rudder, and elevator controls.

A replacement 9g metal-geared flap servo for the Avios Kobuz Sports-Scale Aerobatic Glider. 

The 9iMOD BLS-HV20KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV20KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than RC cars including robotics, etc.

The 9iMOD BLS-HV30KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.075sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV30KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV40KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 40kg, and a speed of 0.085sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV40KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 40kg, and a speed of 0.085sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than RC cars including robotics, etc.

The 9iMOD BLS-HV50KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 50kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV50KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 50kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV60KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 60kg, and a speed of 0.11sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV60KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 60kg, and a speed of 0.11sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV70KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you an amazing torque of 70kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV70KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you an amazing torque of 70kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD DS35MG digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 35kg, and a speed of 0.25sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.