Energie Systeem

De Turnigy Voltage Protector helpt voorkomen dat uw ontvanger uit te laten vallen onder het vereiste werkspanning. Dit helpt om "brown-outs" te elimineren en voorkomt dat de ontvanger van het rebooten. Het zal ook helpen verminderde de belasting op uw ESC BEC en de kans op glitching verminderen. Gewoon de stekker in om eventuele reserve-kanaal op je ontvanger.

Werkend Voltage: 3.2V - 11.1V (1s ~ 3s LiPo)
Condensator voltage: 16v
Opslagcapaciteit: 3300uf
Gewicht: 6,1 g

De FrSky S.BUS PWM Decoder kunt u een standaard analoge of digitale servo's met je S.BUS compatibele ontvanger te gebruiken. Dit elimineert de noodzaak voor het gebruik van dure S.BUS specifieke servo's zodat u uw modellen bestaande servo's gebruiken.

Met 4 programmeerbare kanaal uitgangen, kunt u onafhankelijk van elkaar elke servo toewijzen aan een kanaal van uw keuze, terwijl slechts met één ingang lood aansluiten van uw ontvanger. Dit maakt uw bedrading veel meer netjes en zorgt voor eenvoudige instelling van uw servo's zonder de noodzaak voor het uitvoeren van meerdere verlengsnoeren.

Dit is een geweldig apparaat om te gebruiken in combinatie met onze Oranje 7CH en 9CH S.BUS compatibele ontvangers!

inclusief:
FrSky S.BUS PWM Decoder

specs:
Kanaal Uitgangen: 4 programmeerbare
Channel Ouput Lead Lengte: 200mm
Totale lengte: 350mm

* Opmerking: FrSky Servo Channel Changer vereist (afzonderlijk verkrijgbaar, zie gerelateerde items hieronder) tot toewijzing van kanaal uitgangen te wijzigen.

Compatibel met Futuba Fasst zenders de Corona R14FA biedt een betaalbaar alternatief voor Futaba radio-gebruikers.

specs:
Stroomverbruik:
70mA @ FASST 7ch modus normaal en 110 mA max,
80mA @ FASST multi-channel modus normaal en 110 mA max
Operating Voltage: 4.0 ~ 10V
Wachttijd:
7ms voor hoge snelheid PPM (HS), 14ms voor lage snelheid PPM (LS) @ FASST multi-channel-modus,
8ms voor hoge snelheid PPM (HS), 16ms voor lage snelheid PPM (LS) @ FASST 7ch modus
Gevoeligheid: ~ -96dBm
Fail Safe: Ja
Grootte: 53x37x16mm
Gewicht: 22g
Antenne lengte: 136mm

Verenigbaarheid:
FUTABA FASST 2.4GHz zenders
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG

Monteer dit handige apparaat ergens op uw model waarin duidelijk kan worden gezien en sluit deze aan op een extra kanaal op je ontvanger, als er geen kanaal beschikbaar gebruik dan een Y-lood. Deze eenheid zal u een visuele controle van uw LiPoly of het leven ontvanger batterij elke keer dat u op te geven. De eenvoudig te reeks van LED's leest zul je zien of het veilig is om door te gaan of als de batterij moet worden opgeladen.

specs:
Voltage Range: 6.6 ~ 7.4V
Afmetingen: 40x21x2.5mm
Gewicht: 4g
Lead Lengte: 320mm
Plug: het type JR

De RMILEC Adapter Converter van Commissarissen is de perfecte oplossing voor eenvoudige aansluiting op een SBUS ontvanger mogelijk te maken. De T4363NB18 adapter ondersteunt 5V voeding en kan worden gebruikt niet alleen voor het afstemmen 12FG of 14MZ zenders maar ook afzonderlijk in een andere locatie als een relaisstation worden geplaatst.

Het bord wordt geleverd met hardware, waaronder, JST batterijconnectoren, aan / uit schakelaar, terminals, en het toebehoren geleverd.

Let op: het solderen van de aan / uit schakelaar en terminals nodig.

specs:
Materiaal: PCB
Gewicht: 39.65g
Afmetingen: 90 x 115mm

FrSky TFR6 7ch 2.4Ghz ontvanger FASST Compatible

Verenigbaarheid:
FASST 2.4G: Air Systems (7CH Mode / Multi Mode)
FrSky TF Modules: TF-8M, TF-14M


Kenmerken:
Licht van gewicht en de geringe afmetingen
Keuze uit twee failsafe instelmogelijkheden


specificaties:
Aantal kanalen: 7
Bedrijfsspanningsbereik: 3.5V ~ 10V
Bedrijfstemperatuurbereik: -10C ~ 60C
Afmetingen: 37 * 22 * 8mm
Gewicht: 7,8 g

The FrSky RX8R has been upgraded to the PRO version but retains all the old features. The new PRO version has increased precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. It also has improved anti-interference from the ignition system on combustion engines.

The Turnigy GT5 receiver is perfectly matched to work with the outstanding Turnigy GT5 6CH 2.4GHz AFHDS 2A Surface Radio to provide the most reliable link. Stop changing receivers from model to model and get an extra receiver now.

After the huge success of the Turnigy Evolution, the Evolution PRO is designed with the drone flier in mind and is still amazingly compact for easy backpack transportation.

After the huge success of the Turnigy Evolution, the engineers at Turnigy listened to customer feedback, went back to the drawing board, and came up with the exciting Turnigy Evolution PRO. As with the Evolution, the Evolution PRO is designed with the drone flier in mind and is still amazingly compact for easy backpack transportation.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

De Turnigy GT5 Surface Radio wordt geleverd met de altijd betrouwbare 6-kanaals 2.4 GHz AFHDS 2A (Automatic Frequency Hopping Digital System) om de meest betrouwbare link tussen radio en RC Car of RC Boat te bieden. Inbegrepen in dit pakket is de Turnigy GT5-ontvanger met een ingebouwde gyro voor geweldige driftcontrole. Het ergonomische ontwerp ligt gemakkelijk in de hand.

FrSky R9M radio control system is the first FrSky long range system which works in the frequency of 900MHz. The R9M module offers 4 switchable RF power outputs to so you can choose the appropriate power for different flight situations. Compared to another FrSky 2.4GHz long range receiver like the L9R, the R9 receiver has a longer operating range up to 10KM and above. Moreover, the R9 is also a redundancy receiver which can connect to another receiver to ensure the security of your aircraft.

De FLYSKY FGR4S-ontvanger maakt gebruik van het nieuwe AFHDS3-protocol (derde generatie Automatic Frequency Hopping Digital System). Het maakt gebruik van een interne enkele antenne voor tweerichtingstransmissie en is compact van formaat en eenvoudig te installeren. Het kan standaard PPM- en i-BUS-signalen uitvoeren. Het is een geweldige aanvulling op je FLYSKY Noble NB4 Surface Radio.

veel uitstekende functies, zoals ergonomische styling, cardanische ophanging met Hall-effect, interne antenne en nu met 10 kanalen, zodat u meer mixen en functies kunt gebruiken dan voorheen om betere controle over uw model te geven (of het nu een vliegtuig / zweefvliegtuig, helikopter is of multirotor).

The best just got better, the RADIOMASTER TX16S MKII is the ultimate open-source radio. It is still a high-end, low-cost, OpenTx radio that has many great features, and this version includes the powerful long-range ELRS protocol. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, redesigned battery cover, and improved knobs and sliders that are smoother with a better center ident.

The TX16S MKII transmitter supports EdgeTX and OpenTX open source firmware which is fully supported by the OpenTX development team. RADIOMASTER works closely with the EdgeTX team to develop and optimize the user experience and will continue to ensure that the concept and standards are carried forward into the future. The TX16S MKII is available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

The best just got better, the RADIOMASTER TX16S MKII is the ultimate open-source radio. It is still a high-end, low-cost, OpenTx radio that has many great features, and this version includes the powerful long-range ELRS protocol. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, redesigned battery cover, and improved knobs and sliders that are smoother with a better center ident.

The TX16S MKII transmitter supports EdgeTX and OpenTX open source firmware which is fully supported by the OpenTX development team. RADIOMASTER works closely with the EdgeTX team to develop and optimize the user experience and will continue to ensure that the concept and standards are carried forward into the future. The TX16S MKII is available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

The FrSky FLVS ADV sensor is designed to measure the battery voltage of 2S~8S Li-Po batteries at 0.01V voltage resolution. The data can be transmitted via the F.Port or Smart Port (S.Port) of telemetry-enabled receivers such as the FrSky X8R, X6R, X4R, etc to compatible transmitters, such as the Taranis or other OpenTx radios. This is an obvious choice for accurate measurement of large-capacity Li-Po batteries.

FrSky has enhanced the performance and capability of its original sensors, resulting in the development of the new ADVANCE (ADV) series. All ADV sensors fully support the FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with an FBUS-capable receiver which further simplifies model builds.

The Archer line of receivers has been enhanced further with the Plus Series, they include some exciting new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, they also feature ACCESS and ACCST D16 modes where the RF protocol is smart matched during the binding process. Another feature is a Black-Box function, which records basic flight details such as power and signal-related data.

The FrSky Plus SR8 receiver is designed for use in RC airplanes, it works as a traditional 8-Channel PWM Rx, but it also has a built-in 3-axis gyro and a 3-axis accelerometer sensor module. With the built-in sensors, the Plus SR8 will compensate for outside forces on the airplane and will enhance the stability making it easier and smoother to fly. The Plus SR8 supports multiple flight modes, Auto-level, Stabilisation, Hover, and Knife-Edge. Also available are several configuration methods, these include LUA, or the FrSky S.port Airlink+ combined with the Freelink App.

The FrSky High Precision Vario Sensor monitors atmospheric pressure and reports altitude and changes in pressure, this will indicate where the lift is which is invaluable if you want to find thermals with your RC glider.

The advanced high-precision variometer sensor calculates the altitude from atmospheric pressure, the atmospheric pressure drops as you rise in altitude. Using this change in pressure the sensor can measure the altitude up to 10000 meters with an accuracy tolerance of 0.1 meters. This unit has been designed to be used in conjunction with FrSky telemetry-enabled transmitter and receiver system.

This advanced telemetry sensor incorporates a GPS module to provide useful variable directional information such as position, speed, distance, altitude, and UTC time. It can then be displayed in real-time on FrSky's Taranis transmitters, this can also be logged onto the radio's SD card. This location data is particularly useful for "lost aircraft situations" providing you with the coordinates of your lost model if it's still in radio range or its last known position if not.

The ADV series GPS sensor provides accurate time synchronization with GPS satellites, working with the integrated “Auto adjust from GPS” function in the ETHOS system. This ensures the radio and its telemetry are all in sync with an accurate time system, ensuring telemetry data is in sync with UTC time. This sensor will only work with the FrSky F.Port and Smart Port-enabled receivers. It does not provide autonomous GPS navigation or an RTH mode for your model; it is purely to provide data to your radio.

The best just got better, the RADIOMASTER TX16S Max MKII OpenTx radio has been created to be the best radio in its class without compromising anything. It is still a high-end, low-cost, OpenTx radio that has many great features, and this version includes the powerful long-range ELRS protocol. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, retooled Tx body shell for improved fit and finish, redesigned battery cover, improved knobs and sliders that are smoother with a better center ident. The TX16S Max MKII is also available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The RADIOMASTER Pocket is a small, lightweight radio that packs a big punch and is full of features. It is available in two versions, ExpressLRS and CC2500 (see "Specs" for details), and both versions come with the cutting-edge EdgeTX firmware preinstalled. Also, both versions are available in either an FCC version or a European LBT version, once again, please check the "Specs" below for the supported protocol. For easy transport and storage, the lightweight Pocket transmitter is equipped with removable stick ends and a foldable antenna. It is also compatible with the popular 18650 batteries, these provide a long battery life for hours and hours of fun.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.