Robotica

JST-SH 4Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 4
Pin Spacing: 1mm
Socket Size: 6.5x4.5x3.1mm

JST-SH 5Pin Female Plug with 200mm Wire Pigtail (5pcs)

JST-SH 8Pin Female Plug with 200mm Wire Pigtail (5pcs)

These plugs come fitted with 200mm wire tails.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

JST-SH 5Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 5
Pin Spacing: 1mm

JST-SH 6Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 6
Pin Spacing: 1mm

JST-SH 8Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

Build robots and interactive electronics with this mini digital power amplifier board.The ultra-thin board is a high-performance digital amplifier that can be used to create external speakers for smart devices.

Transform your old micro drones into a super-fast hovercraft! A new trend is emerging in drone racing, the whoover. These are whoop hovercraft assembled from old micro multi-rotors and foam templates. Make your own today!

Questo piccolo interruttore a 4 canali leggero è estremamente utile per le funzioni supplementari sul tutti i tipi di modelli. Collegare il primo singolo in un ausiliario funzione inserita quindi accendere la radio sul canale 1 sul interruttore elettronico sarà quindi attivo, ciclo l'interruttore auxillary una volta e il canale 1 si spegne e il canale 2 si accende, portare l'interruttore di una volta di più e 2 va out e canale 3 va e così via fino a che torna al canale 1. Quando la radio viene spento e riacceso l'unità si imposterà al canale 1 ogni volta. Questa unità è ideale per le luci e spegnimento e altre applicazioni a bassa corrente di commutazione.

Nota: Per questo interruttore per funzionare correttamente è necessario impostare la relativa Travel Channel a + - 100%.

Specifiche:
Tensione in ingresso: 4.8 ~ 7.4v
Tensione di uscita: 4.8 ~ 7.4v
Corrente massima: 2amps
Lunghezza: 40mm
Larghezza: 20mm
Altezza: 12mm
Peso: 7g
Ingresso cavo: 21cm (spina JR)