Veicoli

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

This Micro Engineering HOn3 scale weathered track has a natural brown tie color with nickel silver Code 55 rails. Flex-Trak features scale size ties, tie plates and spikes, irregular tie spacing.

Have you crashed recently? Dust yourself off and keep racing with these quality spare parts. Designed for the 1/28 Mini-Q On Road Car, this racing car shell is made with hardy plastic and will have you back on the roads in no time.

Designed for the 1/28 Mini-Q DIY On Road Car, these replacement chassis parts are made with quality materials and will have you back on the roads in no time.

Tuned specifically for for use with 3.7v LiPo

La Turnigy GT5 Surface Radio viene fornita con l'affidabile AFHDS 2A a 6 canali a 2.4 GHz (sistema digitale di salto di frequenza automatico) per fornire il collegamento più affidabile tra radio e RC Car o RC Boat. In questo pacchetto è incluso il ricevitore Turnigy GT5 con un giroscopio integrato per un fantastico controllo della deriva. Il design ergonomico si adatta facilmente alla tua mano.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

TrackStar 30mm High-Speed Cooling Fan

RJX X-TRON 500 6 x 12 x 4 mm Bearing # X500-8003 (2 pezzi)

Questo piccolo interruttore a 4 canali leggero è estremamente utile per le funzioni supplementari sul tutti i tipi di modelli. Collegare il primo singolo in un ausiliario funzione inserita quindi accendere la radio sul canale 1 sul interruttore elettronico sarà quindi attivo, ciclo l'interruttore auxillary una volta e il canale 1 si spegne e il canale 2 si accende, portare l'interruttore di una volta di più e 2 va out e canale 3 va e così via fino a che torna al canale 1. Quando la radio viene spento e riacceso l'unità si imposterà al canale 1 ogni volta. Questa unità è ideale per le luci e spegnimento e altre applicazioni a bassa corrente di commutazione.

Nota: Per questo interruttore per funzionare correttamente è necessario impostare la relativa Travel Channel a + - 100%.

Specifiche:
Tensione in ingresso: 4.8 ~ 7.4v
Tensione di uscita: 4.8 ~ 7.4v
Corrente massima: 2amps
Lunghezza: 40mm
Larghezza: 20mm
Altezza: 12mm
Peso: 7g
Ingresso cavo: 21cm (spina JR)

Il Turnigy TG9d è il nuovo standard di servi digitali a basso costo nella classe 9 grammi. Con il potere di tenuta e la precisione del digitale, qualcosa di necessario per il vostro piccolo, parco volantini ad alte prestazioni. Includiamo una selezione di armi servo di lavorare con la maggior parte delle applicazioni. Con un prezzo che rivaleggia con meno costosi servi analogici, il TG9d è un aggiornamento impressionante che non becco la banca.

Caratteristiche:
• boccola in plastica
• Spline Heavy Duty uscita
• Servo braccia e vite inclusi
• Perfetta per parkflyers ad alte prestazioni

Specifiche:
Dimensione: 22.4x12.5x23mm
Tensione: 4.8V ~ 6v
Peso: 9g / 0,39 once
Velocità: 0.10 sec / 60 (4.8V)
0.09 sec / 60 (6.0V)
Coppia: 1.6kg-cm (4.8V)
1.8kg-cm (6.0V)
Lavorare Temp: -30C ~ 60C
Ingranaggi: Tipo di nylon bianco

Turnigy LiPo battery packs are well known for delivering excellent performance and durability in your favorite RC cars, and trucks. The Turnigy Rapid range continues this pedigree by using cutting-edge technology to achieve even better performance, greater cycle life, and lower internal resistance. These packs are capable of delivering an incredible discharge rate of 100C! Please note though that these packs have been specially designed for racing, and punch out of corners on a race track, etc, they are not suitable for the prolonged discharge rates that you require for airplanes.

Features:
• Sensor-based for excellent torque and smoothness even at slow speeds
• Adjustable timing for fine-tuning and CW or CCW rotation
• CNC machined T6 aluminum motor case for excellent heat dissipation
• High purity copper windings and 0.2mm ultra-thin silicon steel stator
• Powerful sintered neodymium magnets and high-speed oversize bearings
• Removable/replaceable Rotor
• Water and dustproof

Specs:
Type: Turnigy TrackStar 4268-1900KV High-Torque Sensored Brushless Motor
Scale: 1/8th
Poles: 4 (12 slots)
KV: 1900KV
Max RPM: 50,000
Sensored: Yes (Standard 6-pin lead)
Sensor Lead: Included
Input Voltage: 7.4~22.2V (2~6S)
Max Current: 90A
Resistance: 0.0114 ODM
Motor Diameter: 40.8mm
Motor Length: 68.7mm
Shaft Diameter: 5mm
Shaft Length: 19.5mm
Mounting Screw Threads: 4 x M3 or 4 x M4
Mounting Screw Centers: 25.2mm
Weight: 320g