Accessori per Batterie

Proteggi la tua famiglia e la tua casa dai pericoli della ricarica delle batterie LiPo. Questa borsa LP-Guard è una borsa ignifuga progettata per fermare e contenere gli incendi causati da LiPo non correttamente o mal funzionanti, specialmente durante la carica.

Invitiamo tutti i clienti a praticare sempre estrema cautela durante la carica e non lasciare mai una batteria LiPo in carica incustodita.

Questa è una piccola borsa di 18x22cm che può contenere comodamente tre pacchi LiPo 3S1P da 2200mah.

La LP-Guard è fatta di un tessuto in fibra di vetro che è simile alle tute ignifughe indossate da alcuni vigili del fuoco.

Proteggi la tua famiglia e la casa dal rischio di carica lipo.
Questo lipo-guard è una borsa a prova di fuoco, progettato per fermare e contenere l'incendio causato da lipos in modo non corretto o mal funzionanti, in particolare durante la carica.

Invitiamo tutti i clienti a praticare sempre la massima attenzione quando la carica e non lasciare mai una batteria carica incustodita.

Questo pacchetto è la dimensione jumbo. Si tratta di 25x33cm / 10x13

Il LP-Guard è costituito da un tessuto di fibra di vetro tessuta. Simile a prova di fuoco tute indossate da alcuni vigili del fuoco.

XT30 Male Connector w/24AWG Silicone Wire 55mm (1pc).

The XT90 Parallel Adapters are the perfect solution for the modeler looking to increase battery capacity and reduce the weight of a model. The adapters also prevent adding additional lengths of cable, unlike most solutions. The parallel adapters are neatly soldered together and heat shrink shielded for a professional finish.

We searched for a long time to find a battery strap that was strong yet didn't turn to fluff when used hundreds of times. The result is the TURNIGY battery strap, made from high-end polyester with nylon hooks. They won't break down and will continue to hold batteries firmly even after hundreds of uses.

We searched for a long time to find a battery strap that was strong yet didn't turn to fluff when used hundreds of times. The result is the TURNIGY battery strap, made from high-end polyester with nylon hooks. They won't break down and will continue to hold batteries firmly even after hundreds of uses.

A high quality battery strap that is strong and will not fluff up after a lot of use, they are made from high-end polyester with nylon hooks. They won't break down and will continue to hold batteries firmly even after hundreds of uses. These eye catching battery straps are finished in the classic Nano-Tech colors of green and blue with the Nano-Tech logo printed on them.

A high quality battery strap that is strong and will not fluff up after a lot of use, they are made from high-end polyester with nylon hooks. They won't break down and will continue to hold batteries firmly even after hundreds of uses. These eye catching battery straps are finished in the classic Nano-Tech colors of green and blue with the Nano-Tech logo printed on them.

One end has a male EC3 connector and the other end has a female T connector.

One end has a female EC3 connector and the other end has a male T connector.

One end has male/female 5.5mm gold connectors and the other end has a female T connector.

One end has an EC5 female and the other end has a 5.5mm male/female connector.

Tamiya Female Harness w/Balance Lead for 2S Hardcase Lipo Battery

The perfect solution to connect 2 batteries with 4mm HXT connectors in series.

One end has an XT60 male connector and the other end has a female JST connector.

One end has a 4mm HXT male/female connector and the other has an XT60 female connector.

One end has an XT60 male connector and the other end has a 4mm HXT male/female connector.

T Connector Female Harness w/Balance Lead for 2S Hardcase Lipo Battery

4mm HXT Male/Female Harness w/Balance Lead for 2S Hardcase Lipo Battery.

One end has an XT60 male connector and the other end has a 3.5mm HXT male/female connector. This adapter allows you to use batteries with XT60 connectors to be used in the Walkera QR X350 drone.

Very neat short adapter with one end having a male T connector and the other having an XT60 female connector.

T Connector Female with Harness w/Balance Lead for 2S Hardcase Lipo Battery, the 4mm bullet connectors are set at a 90° angle to reduce the height.

The perfect neat and tidy solution to connect 2 batteries in series.

One end has an XT60 male connector and the other end has a female T connector.

One end has a female mini Tamiya connector and the other has an XT60 male connector.

These are good quality balance lead extensions with a 5S JST-XH male connector on one end and a female on the other.

The perfect solution to connect 2 batteries with XT60 connectors in series.

One end has a male/female 4mm gold connector and the other end has a female T connector.

The SKYRC BD250 is a powerful discharging unit that allows the user to discharge a battery pack at up to 35 amps or 250 watts, it also measures and compares their performance. The BD250 has the ability to discharge, test, and analyze virtually any type and size of battery, regardless of chemistry and the number of cells up to a voltage of 35V.

The Hobbyking 1~8S Cell checker has a twin piezo low voltage alarm of up to 100dB to notify you once your cells reach a user-defined voltage. You can customize the alarm to sound at a voltage between 2.7~3.8V per cell in 0.10V increments by pressing the setting mode button.

This compact adapter is perfect to convert an HXT3.5mm equipped battery to an XT60, or an XT60 charge lead to HXT3.5mm.

Specs:
Connector 1: HXT3.5mm
Connector 2: XT60 female
Weight: 15g (each)
Quantity: 2pcs

A compact battery adapter to convert a T-Connector battery lead to a TR output, compatible with similar types of connectors.