Batterie / Carica batterie

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

ToolkitRC U3 Compact 2~3S USB Type C 25W 2A balance charger is an ultra-compact palm-size balance charger, that plugs into your favorite USB mains power supply. No fancy programming with this baby, just plug it into your USB adapter, connect your 2~3S LiPo battery balance lead, switch it on, and instantly it will start a balanced charge. The charge rate is set at 2A and the LED light will glow red when charging, then change to green when the charge is complete.

Features:
• A compact, fixed-rate charger for 2~3S LiPo batteries
• Utilizes any popular USB Type-C power adapter
• The perfect companion for charging items while traveling
• Simple LED light system denotes charging and standby

The Turnigy Rapid 7500mAh 1S LiPo battery delivers explosive 140C burst discharge for maximum acceleration in competitive RC car racing. Built with premium-grade cells, it ensures stable voltage under heavy load, providing faster throttle response and unmatched performance in drift, touring, or off-road applications.

The Turnigy Rapid Orange series of high voltage hardcase lithium polymer batteries are here and ready to bring out the next level of power to your high-performance RC cars. Turnigy Rapid batteries are built to the highest of standards to provide competition-level performance, a greater cycle life, and a lower internal resistance. With features such as gold-plated balance leads, silver-plated discharge wires, and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! The Rapid hardcase packs have been specially designed for racing, and punch out of corners on a race track, etc; they are not suitable for the prolonged discharge rates that you require for airplanes.

Specs:
Capacity: 8400mAh pack
Voltage: 2S2P/4-Cell/7.6V
Discharge: 100C Constant
Weight: 326g (wire& plug not included)
Dimensions: 138x46x26mm
Balance Plug: JST-XH
Discharge Plug: XT60 Connector

The Turnigy Rapid Orange series of high voltage hardcase lithium polymer batteries are here and ready to bring out the next level of power to your high-performance RC cars. Turnigy Rapid batteries are built to the highest of standards to provide competition-level performance, a greater cycle life, and a lower internal resistance. With features such as gold-plated balance leads, silver-plated discharge wires, and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! The Rapid hardcase packs have been specially designed for racing, and punch out of corners on a race track, etc; they are not suitable for the prolonged discharge rates that you require for airplanes.

Specs:
Capacity: 8400mAh
Voltage: 4S1P/4-Cell/15.2V
Discharge: 100C Constant
Weight: 655g (including wire, plug, & case)
Dimensions: 139x49x46mm
Balance Plug: JST-XH
Discharge Plug: XT90 Connector

The Turnigy Rapid Orange series of high voltage hardcase lithium polymer batteries are here and ready to bring out the next level of power to your high-performance RC cars. Turnigy Rapid batteries are built to the highest of standards to provide competition-level performance, a greater cycle life, and a lower internal resistance. With features such as gold-plated balance leads, silver-plated discharge wires, and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! The Rapid hardcase packs have been specially designed for racing, and punch out of corners on a race track, etc; they are not suitable for the prolonged discharge rates that you require for airplanes.

Specs:
Capacity: 6200mAh
Voltage: 2S1P/2-Cell/7.6V
Discharge: 100C Constant
Weight: 245g (including wire, plug, & case)
Dimensions: 139x47x23mm
Balance Plug: JST-XH
Discharge Plug: XT60 Connector

The Turnigy Rapid Orange series of high voltage hardcase lithium polymer batteries are here and ready to bring out the next level of power to your high-performance RC cars. Turnigy Rapid batteries are built to the highest of standards to provide competition-level performance, a greater cycle life, and a lower internal resistance. With features such as gold-plated balance leads, silver-plated discharge wires, and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! The Rapid hardcase packs have been specially designed for racing, and punch out of corners on a race track, etc; they are not suitable for the prolonged discharge rates that you require for airplanes.

Specs:
Capacity: 6000mAh Shorty pack
Voltage: 2S1P/2-Cell/7.6V
Discharge: 100C Constant
Weight: 215g (wire & plug not included)
Dimensions: 95x46x26mm
Balance Plug: JST-XH
Discharge Plug: XT60 Connector

Unleash next-level performance with the Turnigy Rapid 2S 5100mAh 100C LiHv Battery Shorty Hardcase—built by HobbyKing for serious racers and RC car enthusiasts. This ultra-lightweight 2S LiPo battery is engineered for competition-grade RC touring, drift, and offroad cars, combining exceptional power density with a compact shorty design.

Specification: 

Model NO.: P6

Smart charging: The HOTA T8 charger and checker is equipped with intelligent features to ensure safe and efficient charging of your batteries.

Hota T6 battery charger is a small size charger designed for 1-6s LiHV/Life/Lilon/Lixx/Lipo batteries . It supports DC/PD input, with DC input charging powersoared to 300W, the maximum charging current can reach 15A. It is small, safe and reliable, great for the fpv racing drone batteries.

Specification:
Max Charge Capacity: DC 500W
Charge Current: 0.1A-20.0A
Max Discharge Capacity: 15W
Discharge Current: 0.1A-1.5A
Input Voltage: DC 10-34V
Ouput Voltage: DC 1-35

More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilizing an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and higher discharge rates than similar density lithium polymer (non-nano-tech) batteries.

XT30 Male Connector w/24AWG Silicone Wire 55mm (1pc).

Suitable extension leads for Turnigy lipo batteries.

Suitable extension leads for Turnigy lipo batteries.

The XT90 Parallel Adapters are the perfect solution for the modeler looking to increase battery capacity and reduce the weight of a model. The adapters also prevent adding additional lengths of cable, unlike most solutions. The parallel adapters are neatly soldered together and heat shrink shielded for a professional finish.

Suitable extension leads for Turnigy lipo batteries.

We searched for a long time to find a battery strap that was strong yet didn't turn to fluff when used hundreds of times. The result is the TURNIGY battery strap, made from high-end polyester with nylon hooks. They won't break down and will continue to hold batteries firmly even after hundreds of uses.

We searched for a long time to find a battery strap that was strong yet didn't turn to fluff when used hundreds of times. The result is the TURNIGY battery strap, made from high-end polyester with nylon hooks. They won't break down and will continue to hold batteries firmly even after hundreds of uses.

A high quality battery strap that is strong and will not fluff up after a lot of use, they are made from high-end polyester with nylon hooks. They won't break down and will continue to hold batteries firmly even after hundreds of uses. These eye catching battery straps are finished in the classic Nano-Tech colors of green and blue with the Nano-Tech logo printed on them.

A high quality battery strap that is strong and will not fluff up after a lot of use, they are made from high-end polyester with nylon hooks. They won't break down and will continue to hold batteries firmly even after hundreds of uses. These eye catching battery straps are finished in the classic Nano-Tech colors of green and blue with the Nano-Tech logo printed on them.