Area di Liquidazione

Aluminium Rear Bumper Type A - OH35A01 for the 1/35 Rock Crawler.

The PGYTECH Accessories Combo (Standard) comes with a great set of accessories to help protect DJI MAVIC AIR.

PGYTECH Lens filters can make all the difference to the quality of the video or pictures that the MAVIC PRO takes. These exceptional filters easily screw onto the camera lens.

PGYTECH Lens filters can make all the difference to the quality of the video or pictures that the MAVIC PRO takes. These exceptional filters easily screw onto the camera lens.

Keep the adventure going with high-quality spare parts for your TR-4. The replacement front C hubs are made of aluminum and are an excellent spare part to have handy.

This kit comes complete with the FrSky Taranis X-Lite BRACE. There are also red replacement gimbal stick ends in two sizes, short and long, depending on your needs.

This Mini Vibrating Cleaning set is perfect for removing grease, dust, and other contaminants from small objects. Ideal for bearings, gears, springs, shafts, jewelry, watch parts, and even small precision instruments.

This bearing detergent is the perfect partner to Mini Vibrating Cleaning Unit. Mix this detergent with water for removing grease, dust and other contaminants from bearings, gears, watch parts, jewelry and lots of other small intricate parts.

A simple device that protects the sticks of your DJI Mavic 2 transmitter when being travelling in it's case. Made of tough ABS and finished in a two tone gray that matches the Mavic 2.

Furious FPV is very quickly earning a reputation for producing high quality FPV products. Their build quality is excellent and the Poker Chip Antenna is no exception. The Poker Chip patch antenna is small and light with a 10dBi gain and is a perfect match to the Furious FPV Achilles Diversity Receiver Module. So if you are looking for a new antenna for your FPV goggles then look no further than the Furious FPV Poker Chip. See the attached manual for the radiation pattern and the S-Parameters.

This lens hood for the Mavic 2 very effectively suppresses lens flare, stray light entering the lens and also protects the gimbal from accidental damage. The "U" shaped design with extended shade minimizes vignetting (reduction of an image's brightness or saturation) and undesired color effects. The lens hood is made of high quality tough ABS plastic for durability and is supplied in a gray color that compliments the drone itself. The lens hood is quick and easy to install due to the quick mount design.

Engineered to be up to 10 times tougher than normal PLA, eSUN PLA+ has much higher interlayer bonding strength and is 100% FDA approved. The extra strength makes the filament perfect for hobby projects, including 3D printing spare parts and sculptural designs.

There is nothing like the sound of a 12 blade EDF. These are made from strong composite materials.

There is nothing like the sound of a 12 blade EDF. These are made from strong composite materials.

There is nothing like the sound of an 11 blade EDF. These are made from strong composite materials.

There is nothing like the sound of an 11 blade EDF. These are made from strong composite materials.

The QUICRUN 880 Dual ESC is a durable, highly reliable waterproof electronic speed controller that has been designed for twin brushed motors in 1/10 and 1/8th scale vehicles. The HobbyWing patented copper heat conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the aluminum heatsink for faster and greater heat dissipation.

Keep your car running smoothly with these high-quality spare parts designed specifically for the Blaze 1/10 Scale Cars. These 6-degree caster blocks work with the DCJ conversion as an option for different caster settings.

Se sei preoccupato di graffiare lo schermo di Evolution PROs o di danneggiare uno stick di controllo durante il trasporto, questa cover soddisfa tutte le tue esigenze. Fa semplicemente clic sulla parte anteriore del controller per proteggere in modo sicuro lo schermo e gli stick. È disponibile in bianco o nero.

Se sei preoccupato di graffiare lo schermo di Evolution PROs o di danneggiare uno stick di controllo durante il trasporto, questa cover soddisfa tutte le tue esigenze. Fa semplicemente clic sulla parte anteriore del controller per proteggere in modo sicuro lo schermo e gli stick. È disponibile in bianco o nero.

The Rhino VE40A electronic speed controller with 32-bit MCU has been designed primarily for competitive 1/10, and 1/12 RC rock crawlers, but it is also very suitable for other types of cars and trucks. The preloaded AM32 custom firmware is optimized for RC rock crawlers, but the firmware can be configured for other applications by using the DYS USB-Link (not supplied).

This Bluetooth module makes the programming of your Aerostar RVS G2 HV electronic speed controller extremely easy, simply download the Aerostar App to your Android smartphone or smart device and you are ready to connect and set up your ESC (see under the "Files" tab for the link to the App).

Programmable settings using the Bluetooth module:
• Brake Type: Off/Soft/Mid/Hard
• Motor Timing: Auto/High/Mid/Low
• Motor Rotation: CW/CCW
• HEF (High Efficiency Function: On/Off
• Cell Count (HV Version): Auto/6S/8S/10S/12S/14S
• LVC (Low Voltage Cut-Off/HV): Off/2.3V/2.5V/3V/3.2V/3.2V/3.4V/3.6V
• Voltage Cut-Off Type: Reduce Power/Cut-Off Power
• Start-Up Power: Low/Med/Hard
• Restore Factory Defaults

The G2 HV factory defaults are shown in "Bold".

Please note: This Bluetooth module is only compatible with the Aerostar RVS G2 HV ESC range. It is incompatible with the non-HV series of G2 ESCs, earlier versions of the Aerostar RVS HV ESC, or the ZTW brand of ESC..

Turnigy Slowfly Propeller 7x3.8 Pusher Black (4pcs).

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 4076-2025KV motor has been specially built for 1/8th scale monster trucks and truggies. This 4-pole, 12-slot high-torque motor is water and dust-proof and features a universal mounting system to fit just about all 1/8th-scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and double-shielded oversized bearings are used for durability. The motor includes sintered neodymium magnets, the stator has super thin (0.2mm) laminations, and the rotor is precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 5065-236KV motor suits sport, scale, and 3D-type models. This robust motor suits LiPo batteries up to 10S, on test with a 10S battery it produced an incredible 2000 watts of power at 57A, making it a great motor for the larger models. The motor is supplied with a machined prop adapter, complete with mounting bolts, allowing it to be mounted either way round.

This high-quality all-metal fan unit uses the latest technology and high-grade aluminum alloy to ensure a powerful, smooth-running unit. It is built to the highest of standards, and each blade is precision made to generate the best airflow, and to a rigorous 8-hour fatigue test before installation.

The highly rigid structure is capable of running at a very high RPM which produces an extremely high efflux velocity for maximum speed and efficiency. The design includes an anti-disintegrating safety feature that will stop a blade from flying out of the shroud in the unlikely case of failure. The shroud itself acts as a heatsink for the motor and each unit has been dynamically balanced to ensure smooth running and a long lifespan for both the fan unit and the motor.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass KK2845-5900KV motor has been specially built for 1/12~14th size RC cars and trucks and is totally waterproof for use in extreme conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/12~14th scale vehicles.