Area di Liquidazione

There's a lot to be said for the simple things in life, and with RC equipment becoming ever more flexible it's a refreshing change to find a simple, 4 channel radio that dispenses with the need for programming before you can use it.

The Turnigy TGY-i4X AFHDS/2A does exactly that and is a great entry level 4-channel telemetry 2.4ghz transmitter that can be switched between 1st and 2nd generation Automatic Frequency Hopping Digital System (AFHDS 2A) spread spectrum technology. The Turnigy TGY-i4X has a nice quality look and feel, while the programming is limited to one-switch V-tail/elevon mixing and servo reversing only. The transmitter is capable of being upgraded to up to 10 channels, see manual for details.

An ergonomically designed, ultra slim case design fits comfortably in your hands, an advantage during long flights. Digital trims and easy to read battery indicator LEDs give the TGY-i4X a modern feel with all the essential features you need. With a low profile antenna, the TGY-i4X is easy to transport and store. Adjustable length sticks, and a loop for attaching a neck strap round out the list of comfort features this radio offers.

The TGY-i4X comes with the TGY-i4X 4-channel receiver and is a superb budget radio for both new and experienced pilots alike!

Features:
• Entry level 4 channel 2.4ghz radio
• One switch V-tail/elevon mixer
• Easy to use servo reversing switches
• Standard Wing/Elevon/V-Tail
• Trainer port
• Simple LED battery indicator
• 1-Button binding

Transmitter Specs:
Channels: 4 (Expandable to 10)
Frequency: 2.40~2.48GHz
Bandwidth: 500KHz
DSC Port: PS2
Output: PPM Charger
Modulation: GFSK
Spread Spectrum Mode: AFHDS 2A and AFHDS
Band: 142 RF
Number of Frequency Channels: 20
Output Power: <=20dbm
Working Current: <=100mA
Working Voltage: 6V (4 x AA batteries)
Range: 100~300m
Dimensions: 174 x 89 x 190mm
Weight: 335g
Resolution: 1024 bit
Stick Mode: Mode 2 (Throttle Left)

Receiver Specs:
Channel: 4
Frequency: 2.40~2.48GHz
Power: 4.5V~6.6V/<30ma
Weight: 13g
Antenna length: 26mm
Dimensions: 45 x 23 x 9mm

Included:
Turnigy TGY-i4X transmitter
Turnigy TGY-i4X receiver
Bind plug
Manual

Requires:
4 x AA batteries

Instruction Manual is available under the "Files" tab.

Learn More

9114000063-0 Learn More

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Learn More

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

Learn More

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

Learn More

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

Learn More

FrSky M7-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis Q X7/X7S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.

Learn More

After the huge success of the Turnigy Evolution, the engineers at Turnigy listened to customer feedback, went back to the drawing board, and came up with the exciting Turnigy Evolution PRO. As with the Evolution, the Evolution PRO is designed with the drone flier in mind and is still amazingly compact for easy backpack transportation.

Learn More

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

Learn More

This kit comes complete with the FrSky Taranis X-Lite BRACE. There are also red replacement gimbal stick ends in two sizes, short and long, depending on your needs.

Learn More

Se sei preoccupato di graffiare lo schermo di Evolution PROs o di danneggiare uno stick di controllo durante il trasporto, questa cover soddisfa tutte le tue esigenze. Fa semplicemente clic sulla parte anteriore del controller per proteggere in modo sicuro lo schermo e gli stick. È disponibile in bianco o nero.

Learn More

Se sei preoccupato di graffiare lo schermo di Evolution PROs o di danneggiare uno stick di controllo durante il trasporto, questa cover soddisfa tutte le tue esigenze. Fa semplicemente clic sulla parte anteriore del controller per proteggere in modo sicuro lo schermo e gli stick. È disponibile in bianco o nero.

Learn More

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

Learn More

The FGr8B surface micro receiver adopts FLYSKY's third-generation automatic frequency hopping digital system (AFHDS 3), it is perfectly suited to their range of PL18, NB4, and NB4 Lite transmitters. It uses a single antenna bidirectional transmission system that is uniquely designed to install and output PWM/PPM, and iBUS in signals.

Learn More

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

Learn More

The RADIOMASTER TX12 is a compact, low-cost, OpenTx radio that has many great features. Being compact, it is about two-thirds the size of a traditional transmitter, has a removable antenna, and a folding carry handle, which makes it the perfect option for traveling. Despite its smaller size, it is comfortable to hold due to its well-designed case and improved ergonomic hand grips. This MKII version with upgraded STM32F407 MTU has the cutting-edge EDGETX software pre-installed. This open-source firmware is highly customizable to allow users to configure their transmitters through the supplied USB-C data port to adjust the settings for their individual preferences and specific needs. EdgeTX supports a wide range of RC protocols and is a versatile and powerful tool which makes it extremely popular with the RC community. RADIOMASTER works closely with the EdgeTX team to develop and optimize the user experience and will continue to ensure that the concept and standards are carried forward into the future. Learn More

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

Learn More

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

Learn More

Learn More

Learn More

Learn More

Proteggere il ricevitore OrangeRx dai danni e vibrazioni con questa protezione shell.Fits silicone snuggly intorno la maggior parte dei ricevitori non satellitari ed ha fori di uscita sul retro e laterale per le antenne.

Specifiche:
Lunghezza: 44,5 millimetri
Larghezza: 25mm
Altezza: 16 millimetri
Peso: 6g

Learn More

Proteggi i tuoi ricevitori arancio dai danni carburante o incidente con l'Orange RX gomma di silicone
Conchiglia. La shell fornisce protezione per il cuore del vostro modello di RC mentre anche fornendo
opzioni di fissaggio aggiuntivi. La parte posteriore del guscio ha uno slot per consentire l'uso di gancio e cinghie con occhielli di fissaggio, slot aggiuntivi sono forniti per la porta antenna e satellitare del ricevitore.

Specifiche:
Ricevitore adatto: arancione R620
Materiale: gomma silicone
Colore: Nero
Dimensioni: 46 x 25 x 17mm
Peso: 4.4g

Learn More

Proteggere il ricevitore OrangeRx dai danni e vibrazioni con questa protezione shell.Fits silicone snuggly intorno la maggior parte dei ricevitori satellitari ed ha un foro di uscita sul retro per l'antenna e un cut-out sul lato per il tappo ricevitore satellitare.

Specifiche:
Lunghezza: 47,5 millimetri
Larghezza: 25mm
Altezza: 16 millimetri
Peso: 8g

Learn More

Proteggi i tuoi ricevitori arancio dai danni carburante o incidente con l'Orange RX gomma di silicone
Conchiglia. La shell fornisce protezione per il cuore del vostro modello di RC mentre anche fornendo
opzioni di fissaggio aggiuntivi. La parte posteriore del guscio ha una fessura per consentire l'uso di velcro
cinghie di fissaggio, slot aggiuntivi sono previsti per l'antenna doppia.

Specifiche:
Ricevitore adatto: arancione R615
Materiale: gomma silicone
Colore: Nero
Dimensioni: 46 x 22 x 15mm
Peso: 3.5g

Learn More

Proteggi i tuoi ricevitori arancio dai danni carburante o incidente con l'Orange RX gomma di silicone
Conchiglia. La shell fornisce protezione per il cuore del vostro modello di RC mentre anche fornendo
opzioni di fissaggio aggiuntivi. La parte posteriore del guscio ha una fessura per consentire l'uso di velcro
cinghie di fissaggio, slot aggiuntivi sono previsti per l'antenna doppia.

Specifiche:
Ricevitore adatto: arancione R620
Materiale: gomma silicone
Colore: Nero
Dimensioni: 43 x 25 x 16 millimetri
Peso: 5g

Learn More

Trackstar TS3t sensore di temperatura per auto elettrica / barca

Specifiche:
Lunghezza: 390 millimetri
Spina: La spina JR

Learn More

Pezzo di ricambio - Premium BNC cavo 1,3 m RG223 per il sistema UHF Scherrer Rx700LR Long Range

Learn More

Pezzo di ricambio - RC adattatore Multiplex per il sistema Scherrer Rx700LR Long Range UHF

Learn More

Pezzo di ricambio - adattatore RC per MPX per Scherrer LR UHF Sistema

Learn More

Rx700NR is a small and very light weight receiver with 9 channels that has a range of up to 20km! It also has an optimized input filter which will prevent interference from strong 2.4 GHz video systems.

The Rx700NR will work with any Scherrer long range transmitter and will provide you with a solid and safe signal for your flights. The antenna is mounted directly on the board and with a total weight of only 8 grams this receiver is perfect for UAVs where the focus is on weight and longer flight times.

Features:
• Up to 20km range
• External firmware upgrade port
• Running LED
• Completely new software
• Selectable PPM/PWM
• Sequential failsafe

Specs:
Board Dimensions: 26 x 53mm
Weight: 8g
Number of channels: 9
Output: PPM output 
Rssi output: 0.5 to 3.3V from min to mix
Supply voltage: 4 -10 V
Supply current RX: 18mA at 5V
System: Wideband frequency hopping 
Band: 433 and 440 MHz 
User firmware upgradeable: Yes
Wide user temperature range: -40C to +70C ambient

Learn More

Il HobbyKing® ™ GT2E è un conveniente, a 2 canali radio a 2,4 GHz terra, con sterzo regolabile dual-rate e servo di retromarcia, il che rende molto semplice l'installazione per la vostra auto o in barca. La luppolizzazione di frequenza automatica sistema digitale fornisce un segnale forte e 2.4ghz affidabile, in modo da stare certi che sarai sempre in controllo. Incluso nella confezione è un ricevitore a 3 canali mini che si inserisce nella maggior parte dei veicoli. La sensazione ergonomica del trasnsmitter si sentirà bene nelle vostre mani anche dopo lunghe sessioni in pista.

Caratteristiche:
• affidabile, senza interferenze 2.4GHz AFHDS funzionamento del segnale
• Funzionamento 2CH
• Utilizzare solo batterie 4xAA per il trasmettitore
• dello sterzo regolabile dual-rate
• Procedura di rilegatura semplice

Specifiche del trasmettitore:
Potenza RF: 20dBm (100mW) max
Modulazione: GFSK
Tipo di sistema: AFHDS 2A
Sensibilità: 1024
Low Voltage Warning: Sì
DSC Port: 3.5mm
Presa di ricarica: Si (3,5 pollici)
Alimentazione: 4xAA, 6VDC
Peso: 241g

Ricevitore Specifiche:
Ricevitore RF Sensibilità: -105dBm
Modulazione: GFSK
Tipo di sistema: AFHDS 2A
Sensibilità: 1024
Failsafe: Sì (Canale 2)
Porta di alimentazione: Si (VCC)
Potenza: 4.5 ~ 6.5 VDC
Peso: 5g
Antenna Lunghezza: 26mm
Dimensioni: 37x22x12mm

include:
Trasmettitore HK-GT2E
Ricevitore HK-GT2E 3CH
tubo Antenna
spina Bind
Manuale utente

Learn More

Affidabile monitorare la tensione della batteria con il TGY-CVT01 sensore di tensione Turnigy.

Come una grande alternativa a impostare un timer, volare o guidare il vostro modello basato sulla tensione effettiva della batteria. In questo modo se la vostra tensione scende più velocemente del solito a causa di esecuzione di più, è possibile evitare un eccesso di scarico per il gruppo. O, forse si sta avendo una bella giornata rilassante? Godetevi i tempi di esecuzione più lunghi e non tagliarsi breve.

Questo piccolo sensore compatto è anche un modo perfetto per aggiungere un pezzo di mente quando si esegue un modello ad alte prestazioni, consentendo di verificare che la tensione della batteria non è in calo eccessivamente sotto carico.

Per l'uso con le i10 e i6 trasmettitori TGY- e TGY-iA10 e ricevitori i6 V2.

Progettato per concatenare insieme ad altri sensori della serie TGY-C.

Caratteristiche:
• Alta qualità, sensore compatto
• connettori di ingresso e di uscita in stile Futaba
• Grande per tensione di monitoraggio della batteria, non c'è bisogno di impostare più temporizzatori
• Funziona con TGY- i10 e i6 trasmettitori e TGY-iA10 e ricevitori i6 V2

Specifiche:
Intervallo di tensione: 0 ~ 100V DC
Precisione: 0.1V +/-
Tensione in ingresso: 4.0 ~ 6.5V
Corrente di funzionamento: 9mA
Lunghezza del cavo: 195 millimetri
Dimensioni: 31 x 15 x 8,5 millimetri
Peso: 6.25g (cavi inc e sensore)

Learn More

L'HobbyKing GT2B è dotato di funzionamento a 3 canali, impugnature intercambiabili, sterzo regolabile a doppia velocità, inversione del servo e una batteria ricaricabile agli ioni di litio che elimina la necessità di acquistare costose batterie AA. La batteria agli ioni di litio rende anche questo trasmettitore molto più leggero, il che offre all'utente un'ottima sensazione durante l'uso. Non dovrai più trascinarti dietro un pesante trasmettitore con 8 batterie AA!

Learn More

Soprattutto fatto per il nostro i10 Turnigy, questa tenda da sole migliorerà la visibilità dello schermo LCD touch.

Semplicemente buccia e bastone e montare direttamente intorno alla zona dello schermo. L'ombra crolla facilmente per lo stoccaggio / trasporto.

Learn More