$10 - $49.99

A replacement set of wheels for the 975mm XFLY T-7A Red Hawk (3pcs).

Replacement multi-function control board for the 975mm XFLY T-7A Red Hawk.

A replacement nose gear servoless retract unit for the 975mm XFLY T-7A Red Hawk.

A replacement horizontal stabilizer with elevator for the XFLY Swift 2100mm Sport Glider.

This optional EDF nacelle unit will convert your XFLY Swift 2100 into an EDF-powered sport glider. The unit includes the XFLY Galaxy 64mm 12-blade fan, and the powerful XFLY 2840-3200KV brushless motor to give your Swift on a 4S battery an incredible performance. Installation is very straightforward, once installed you will only need to remove the prop and fit the supplied nose cone.

Specs:
Type: XFLY Swift 2100 Sport Glider Optional EDF Unit
Fan: 64mm 12-blade
Motor: 2840-3200KV brushless
Thrust: 1250g
Recommended Battery: 14.8V (4S) 2200~3300mAh LiPo (not supplied)

A replacement fuselage with nosegear for the red and white XFLY 850mm Partenavia P68 Twin.

A replacement wing set with ailerons for the red and white XFLY 850mm Partenavia P68 Twin.

A replacement fuselage for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of wings for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of wings for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of horizontal stabilizers for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of horizontal stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of vertical stabilizers for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of vertical stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement battery hatch and cockpit with a pilot for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement set of landing gear with wheels for the 750mm XFLY Sukhoi Su-27 Flanker.

This optional CNC main gear set with oleo, wheels, and shock absorption for the XFLY Sukhoi Su-27 Flanker will make for smoother take-offs and landings, they also look great as well.

The Rhino VE40A electronic speed controller with 32-bit MCU has been designed primarily for competitive 1/10, and 1/12 RC rock crawlers, but it is also very suitable for other types of cars and trucks. The preloaded AM32 custom firmware is optimized for RC rock crawlers, but the firmware can be configured for other applications by using the DYS USB-Link (not supplied).

A replacement battery hatch and cockpit with pilot for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement fuselage with wiring harness for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

Please note: The nose cone is not supplied with the fuselage.

A replacement pair of main wings for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement pair of horizontal stabilizers with fixings for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement pair of vertical stabilizers for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement cockpit and battery hatch for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement set of landing gear with wheels for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized bearings are used for durability. The stator has super thin (0.2mm) laminations, and the rotor is then precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and double-shielded oversized bearings are used for durability. The motor includes sintered neodymium magnets, the stator has super thin (0.2mm) laminations, and the rotor is precision balanced for reliability, and ultra-smooth running at maximum RPMs.

The Rocket Surpass 5065-236KV motor suits sport, scale, and 3D-type models. This robust motor suits LiPo batteries up to 10S, on test with a 10S battery it produced an incredible 2000 watts of power at 57A, making it a great motor for the larger models. The motor is supplied with a machined prop adapter, complete with mounting bolts, allowing it to be mounted either way round.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass KK2845-5900KV motor has been specially built for 1/12~14th size RC cars and trucks and is totally waterproof for use in extreme conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/12~14th scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass 3650-5400KV motor has been specially built for 1/10th size RC cars and trucks and is water and dust-resistant for use in demanding conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/10th scale vehicles.

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass 3660-4500KV motor has been specially built for 1/10th size RC cars and trucks and is water and dust-resistant for use in demanding conditions. This powerful 3T, 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/10th scale vehicles.

Turnigy SK3 motori sono il prossimo salto di qualità del motore e del design. Abbiamo incaricato i tecnici di procurarsi i migliori qualità magneti, cuscinetti e materiali a loro disposizione e sviluppare un motore che non solo rivale, ma superare oggi la qualità di molti motori principali produttori sul mercato.

Il risultato è un efficiente, ad alta motore calibro usando qualità doppi cuscinetti schermati, magneti al neodimio sinterizzato e uno statore stringa ferita garantire un accurato e costante avvolgimento ogni volta.

I motori Turnigy SK3 sono adatti per modellisti che sono alla ricerca di un motore brushless qualità senza compromessi.

Specifiche.
Attiva: 30T
Tensione: 2 ~ 3S Lipoly
RPM / V: 1740 kv
Resistenza interna: 0,125 Ohm
Max carico: 10A
Potenza massima: 115W
Shaft Dia: 3,0 millimetri
Fori dei bulloni di filmato: 16mm e 19 millimetri
Filo Bolt: M3
Peso: 32g
Motore spina: 3,5 millimetri Connettore pallottola

Turnigy SK3 motori sono il prossimo salto di qualità del motore e del design. Abbiamo incaricato i tecnici di procurarsi i migliori qualità magneti, cuscinetti e materiali a loro disposizione e sviluppare un motore che non solo rivale, ma superare oggi la qualità di molti motori principali produttori sul mercato.

Il risultato è un efficiente, ad alta motore calibro usando qualità doppi cuscinetti schermati, magneti al neodimio sinterizzato e uno statore stringa ferita garantire un accurato e costante avvolgimento ogni volta.

I motori Turnigy SK3 sono adatti per modellisti che sono alla ricerca di un motore brushless qualità senza compromessi.

Specifiche.
Attiva: 26T
Tensione: 2 ~ 3S Lipoly
RPM / V: 1130 kv
Resistenza interna: 0,120 Ohm
Max carico: 13A
Potenza massima: 125W
Shaft Dia: 3,0 millimetri
Fori dei bulloni di filmato: 16mm e 19 millimetri
Filo Bolt: M3
Peso: 44g
Motore spina: 3,5 millimetri Connettore pallottola

Turnigy SK3 motori sono il prossimo salto di qualità del motore e del design. Abbiamo incaricato i tecnici di procurarsi i migliori qualità magneti, cuscinetti e materiali a loro disposizione e sviluppare un motore che non solo rivale, ma superare oggi la qualità di molti motori principali produttori sul mercato.

Il risultato è un efficiente, ad alta motore calibro usando qualità doppi cuscinetti schermati, magneti al neodimio sinterizzato e uno statore stringa ferita garantire un accurato e costante avvolgimento ogni volta.

I motori Turnigy SK3 sono adatti per modellisti che sono alla ricerca di un motore brushless qualità senza compromessi.

Specifiche.
Attiva: 12T
Voltaggio: 3 ~ 4S Lipoly
RPM / V: 1400 kv
Resistenza interna: 0.021 Ohm
Max carico: 40A
Potenza massima: 590W
Shaft Dia: 5,0 millimetri
Fori dei bulloni: 25mm
Filo Bolt: M3
Peso: 110g
Motore spina: 3,5 millimetri Connettore pallottola

Turnigy SK3 motori sono il prossimo salto di qualità del motore e del design. Abbiamo incaricato i tecnici di procurarsi i migliori qualità magneti, cuscinetti e materiali a loro disposizione e sviluppare un motore che non solo rivale, ma superare oggi la qualità di molti motori principali produttori sul mercato.

Il risultato è un efficiente, ad alta motore calibro usando qualità doppi cuscinetti schermati, magneti al neodimio sinterizzato e uno statore stringa ferita garantire un accurato e costante avvolgimento ogni volta.

I motori Turnigy SK3 sono adatti per modellisti che sono alla ricerca di un motore brushless qualità senza compromessi.

Specifiche.
Attiva: 10T
Voltaggio: 3 ~ 4S Lipoly
RPM / V: 1250kv
Resistenza interna: 0.022Ohm
Max carico: 54A
Potenza massima: 755W
Shaft Dia: 5,0 millimetri
Fori dei bulloni: 25mm
Filo Bolt: M3
Peso: 141g
Motore spina: 3,5 millimetri Connettore pallottola