Area di Liquidazione

This is a replacement pair of gear doors, oleo's, and wheels for the H-King Yak-11 Red Reno Racer.

This is a replacement pair of gear doors, oleo's, and wheels for the H-King Yak-11 Commemorative Russian WW2 Warbird.

A replacement wing joiner/main spar for the H-King Yak-11 Red Reno Racer/Commemorative Russian WW2 Warbird.

This is a replacement decal set for the H-King Yak-11 Red Reno Racer.

Vuoi ancora più velocità e potenza per il tuo H-King Reno Aces P-51 "Galloping Ghost"? Quindi passa a questo Pro 3108-1160KV brushless ad alta potenza opzionale e trasformalo in un missile balistico con prestazioni verticali illimitate. Non è necessario cambiare l'elica in dotazione o l'ESC, entrambi vanno bene con questo aggiornamento.

A strong, flexible, transparent fuel tank that is suitable for most types of RC models. The fuel tank includes a machined metal cap with fuel feed, a flexible fuel feed pipe with clunk weight, and 2 factory-installed machined metal 90° hose attachment nipples. One of these is for filling the tank, and the other is used for pressure or venting. Each fuel tank comes with a Turnigy sticker that includes the capacity of the tank, this can be attached to the tank in a convenient position to remind you of its size. The fuel tank is suitable for use with both gas and nitro fuels.

A replacement crankshaft set for the Turnigy TP10 10cc gas engine. This set includes the crankshaft, conrod, prop-driver woodruff key, and prop nut.

A replacement crankcase set for the Turnigy TP10 10cc gas engine, this set includes the crankcase, gasket, and 2 x screws.

A replacement prop driver set for the Turnigy TP10 10cc gas engine. This set includes the prop driver with inset magnet, prop washer, and woodruff key.

A replacement crankcase for the Turnigy TP26 26cc gas engine.

Un nastro biadesivo di alta qualità perfetto per fissare servi, ricevitori e molti altri oggetti nei tuoi modelli. È realizzato in schiuma di polietilene antiurto con un forte adesivo acrilico applicato su entrambi i lati, questa schiuma PE è perfetta per isolare i componenti elettronici sensibili dalle vibrazioni. Altre caratteristiche del nastro sono che è resistente all'acqua, alla temperatura e ha una protezione dai raggi UV.

A replacement pair of main landing gear retaining plates for the Durafly Tundra V2/V3 and Night Tundra.

Note: This replacement spare part for the Durafly Tundra V2 is not compatible with the Tundra V1.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the Civilian Cargo version of the Avios C-130 V2.  Please note that this spare part is not suitable for the original versions of the C-130.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A complete replacement set of decals for the Civilian Cargo version of the Avios C-130 V2.

Accurately drill your propellers for your TP 35cc gas engine with this easy-to-use drilling jig. The jig is CNC machined from aluminum stock and is supplied with a clamping screw to hold the propeller secure whilst drilling.

A replacement set of scale detailing parts for the AVIOS KingTwin 1700.

A replacement prop adapter for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

A replacement canopy and battery hatch for the H-King F-16 Fighting Falcon 550mm.

A replacement pair of horizontal stabilizers with elevators for the H-King F-16 Fighting Falcon 550mm.

A replacement vertical stabilizer with factory-applied decals for the H-King F-16 Fighting Falcon 550mm.

A replacement carbon wing spar for the H-King F-16 Fighting Falcon 550mm.

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-16 Fighting Falcon 550mm.

A replacement canopy and battery hatch for the H-King F-18 Super Hornet 588mm.

A replacement pair of vertical stabilizers with factory-applied decals for the H-King F-18 Super Hornet 588mm.

A replacement carbon wing spar for the H-King F-18 Hornet 588mm.

An upgraded nosewheel landing gear retract set for the Avios KingTwin Sport/Scale Turboprop. This upgraded assembly has been manufactured with a different composition for the plastic parts which is harder. Also, the pushrod linkage has been made of thicker, stronger steel for more durability.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

Il cavo adattatore ToolkitRC SC100 viene utilizzato per alimentare caricabatterie a basso wattaggio o altri dispositivi con un connettore di ingresso XT60 da un alimentatore USB-C fino a 100 W.

Specifiche:
Tipo: ToolkitRC SC100 XT60~Cavo protocollo USB-C
Ingresso: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Tensione di uscita: 5~20V max
Corrente di uscita: 5 A max
Connettore di uscita: XT60
Lunghezza: 50 cm
Peso: 35 g

A replacement 10x8 3-blade propeller for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement aluminum alloy rudder support set for the Aquaholic V3 brushless racing boat.

A replacement coupler for connecting the motor to the 4mm flexi-shaft that will fit either the Aquaholic V2 or the V3 brushless racing boat.