Area di Liquidazione

servi brushless digitali, il massimo in termini di precisione e capacità di tenuta. Trackstar da Turnigy sa importanza portando una linea di servi brushless digitale per 1/8 e 1 / applicazioni per veicoli scala 10 °. Questi servi robusti presentano casi in lega, doppi alberi di uscita cuscinetti a sfera, e un treno di ingranaggi in titanio.

Per fornire le migliori prestazioni, più efficiente questi servi sono progettati per funzionare su una vasta gamma di tensioni da 6,0 fino a 7.4V. Nei test sono stati in grado di sopportare l'abuso delle corse su strada e off-road e ancora tornare per ulteriori informazioni.

Il TS-910 è un servo di dimensioni standard ideale per le applicazioni Truggy scala e monster truck 1/8 °. Includiamo bracci multipli servo diversi e un pacchetto completo di hardware di montaggio.

Specifiche:
Peso: 66g
Dimensione: 39mmx19mmx38.5mm
Coppia: 25.8kg.cm (6.0V) - 30.6kg.cm (7.4V)
Velocità: 0.16sec / 60deg (6.0V) - 0,14 sec / 60deg (7.4V)
Tensione: 6.0 ~ 7.4V
Motore: Giappone Brushless
Tipo: Digitale
Treno di ingranaggi: Titanium
Cuscinetto a sfere: cuscinetto a sfera N2
Lead Length: 300mm
Collegare: JR / Futaba

Se stai cercando il servo dello sterzo migliore per il vostro 1/8 Truggy scala, abbiamo la cosa giusta!

Il Trackstar TS-621MG è un servo digitale di dimensioni standard con un gruppo ingranaggi di metallo, motore coreless e un tempo di transito veloce 0.14sec. A questo si aggiunge la sua eccellente prestazione e ingannato fuori sguardi, e si dispone di un eccezionale servosterzo per il prezzo!

Specifiche:
Peso: 57g
Dimensione: 39.0mmx19.5mmx38.5mm
Coppia: 16.8kg.cm (4.8V) ~ 21.2kg.cm (6.0V)
Velocità: 0.16sec / 60deg (4.8V) ~ 0.14sec / 60deg (6.0V)
Tensione: 4.8 ~ 6.0V
Tipo: Standard Digitale
Motore: Motore Coreless
Treno di ingranaggi: ingranaggi in lega
Cuscinetto a sfere: doppio cuscinetto a sfera Giappone NSK
Lead Length: 255 millimetri
Collegare: JR / Futaba

There's a lot to be said for the simple things in life, and with RC equipment becoming ever more flexible it's a refreshing change to find a simple, 4 channel radio that dispenses with the need for programming before you can use it.

The Turnigy TGY-i4X AFHDS/2A does exactly that and is a great entry level 4-channel telemetry 2.4ghz transmitter that can be switched between 1st and 2nd generation Automatic Frequency Hopping Digital System (AFHDS 2A) spread spectrum technology. The Turnigy TGY-i4X has a nice quality look and feel, while the programming is limited to one-switch V-tail/elevon mixing and servo reversing only. The transmitter is capable of being upgraded to up to 10 channels, see manual for details.

An ergonomically designed, ultra slim case design fits comfortably in your hands, an advantage during long flights. Digital trims and easy to read battery indicator LEDs give the TGY-i4X a modern feel with all the essential features you need. With a low profile antenna, the TGY-i4X is easy to transport and store. Adjustable length sticks, and a loop for attaching a neck strap round out the list of comfort features this radio offers.

The TGY-i4X comes with the TGY-i4X 4-channel receiver and is a superb budget radio for both new and experienced pilots alike!

Features:
• Entry level 4 channel 2.4ghz radio
• One switch V-tail/elevon mixer
• Easy to use servo reversing switches
• Standard Wing/Elevon/V-Tail
• Trainer port
• Simple LED battery indicator
• 1-Button binding

Transmitter Specs:
Channels: 4 (Expandable to 10)
Frequency: 2.40~2.48GHz
Bandwidth: 500KHz
DSC Port: PS2
Output: PPM Charger
Modulation: GFSK
Spread Spectrum Mode: AFHDS 2A and AFHDS
Band: 142 RF
Number of Frequency Channels: 20
Output Power: <=20dbm
Working Current: <=100mA
Working Voltage: 6V (4 x AA batteries)
Range: 100~300m
Dimensions: 174 x 89 x 190mm
Weight: 335g
Resolution: 1024 bit
Stick Mode: Mode 2 (Throttle Left)

Receiver Specs:
Channel: 4
Frequency: 2.40~2.48GHz
Power: 4.5V~6.6V/<30ma
Weight: 13g
Antenna length: 26mm
Dimensions: 45 x 23 x 9mm

Included:
Turnigy TGY-i4X transmitter
Turnigy TGY-i4X receiver
Bind plug
Manual

Requires:
4 x AA batteries

Instruction Manual is available under the "Files" tab.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Turnigy TGY-813 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

FrSky M7-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis Q X7/X7S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.

After the huge success of the Turnigy Evolution, the engineers at Turnigy listened to customer feedback, went back to the drawing board, and came up with the exciting Turnigy Evolution PRO. As with the Evolution, the Evolution PRO is designed with the drone flier in mind and is still amazingly compact for easy backpack transportation.

This kit comes complete with the FrSky Taranis X-Lite BRACE. There are also red replacement gimbal stick ends in two sizes, short and long, depending on your needs.

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

The FGr8B surface micro receiver adopts FLYSKY's third-generation automatic frequency hopping digital system (AFHDS 3), it is perfectly suited to their range of PL18, NB4, and NB4 Lite transmitters. It uses a single antenna bidirectional transmission system that is uniquely designed to install and output PWM/PPM, and iBUS in signals.

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

Ogni cella è selezionata a mano e abbinata per il massimo della qualità per offrire la potenza, la durata e il tempo di esecuzione necessari per i modelli ad alte prestazioni di oggi. Ogni confezione è controllata e testata in ogni fase dell'assemblaggio per garantire la massima qualità possibile. Questo accurato processo di abbinamento e controllo consente ai pacchi di raggiungere una velocità di scarico strabiliante fino a 140 ° C. Se sei il corridore esigente o l'hardcore che ha bisogno di spremere le tue ultime prestazioni dalle batterie, questo è il pacchetto che fa per te!

Fusoliera di ricambio per Durafly Goblin Racer in giallo / nero / argento.

Spia di coda e ascensore di ricambio per Durafly Goblin Racer in giallo / nero / argento.

Replacement fuselage for the Durafly Goblin Racer in Pink/Blue/Black.

H-King Avro Lancaster V3 "Dumbo" Replacement Main Wings w/Decals.

Please note: No motors, ESC's or servos are included, these are the foam parts only.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Drive Shaft Support Set.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement CNC Aluminum Rudder Assembly w/Plastic Mounting Bracket.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Stainless Steel Turn Fins w/Mounting Set.

A replacement fuselage with canopy for the Volantex Ranger 1600, and Ranger 2000 electric gliders.

Volantex Ranger 1600 and Phoenix 1600 Replacement Fin/Rudder/Horizontal Stabilizer.

A replacement fin, rudder, and horizontal stabilizer for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

A replacement horizontal stabilizer with elevator, and vertical stabilizer with rudder for the Volantex Ranger 2400 and Phoenix 2400.

Volantex Phoenix 2400/Ranger 2400 Replacement Camera Mount Canopy.

A replacement AVIOS Extra 330LX V2 left-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement fuselage for the AVIOS KingTwin 1700 with factory-applied decals. Please note that the cockpit/hatch cover is not included with this item.

A replacement wing center section for the AVIOS KingTwin 1700 with factory-applied decals, and wiring. 

A replacement left-hand wing panel for the AVIOS KingTwin 1700 with factory-applied decals, aileron, spars, and latching catch.

A replacement pair of horizontal stabilizers for the AVIOS KingTwin 1700 with factory-applied decals, elevators, and spars.

Nitro Rumble - Motore carter

Basher Nitro Circus MT - F / R sterzo braccia kunckle

Dytac 20 pollici SPR esterno gruppo del cilindro per Marui M4 (argento)

Caratteristiche:
• 20 pollici SPR Outer Barrel Set
• Costruzione in alluminio barile
• Viene fornito con blocco a basso profilo di gas e tubo del gas
• Progettato per Tokyo Marui M4 / M16 AEG
• Color argento

Spec:
Materiale: Alluminio
Colore: Silver
Peso: 466g
Lunghezza totale: 505 millimetri
Le discussioni Barrel: non c'è discussione su questo barile
Tipo Canna: la lunghezza del fucile
Modello basato: Tokyo Marui M4 / M16 AEG
Produttore: Dytac

La confezione include:
1x 20 pollici SPR Outer Barrel
1x blocco del gas a basso profilo
Tubo 1x Dummy Gas

SkyZone hanno forgiato una reputazione di qualità e affidabilità nei loro prodotti che sono stati testati e sviluppati dai piloti FPV. Il trasmettitore SKY-N2000 confezioni un 2000mW enorme di ultra potere 5.8GHz pulito! Un must per chi cerca una portata maggiore e bloccato in video. L'N2000 può trasmettere una gamma completa di 32 canali e viene fornito completo di tutti i cavi di collegamento.

L'N2000 offre alcune caratteristiche impressionanti, tra cui la commutazione canale remoto, cioè la banda di trasmissione e il canale può essere cambiato a distanza con un interruttore a 3 posizioni sulla radio. Questa funzione permette di cambiare rapidamente a una banda chiara e la frequenza si dovrebbe incontrare interferenze sul canale esistente.

Caratteristiche:
• 128 x 64 super luminoso display digitale a colori con luminosità e contrasto di controllo
• Visualizzazione canale e frequenza
• 2W di potenza di trasmissione
• ingresso video 2 canali, cambio canale a distanza
• Supporto batteria 2-6S LiPoly
• Display Tensione della batteria
• Schermo: Current / / rilevamento temperatura PA Potenza

Specifiche:
Tensione di funzionamento: 6.5 ~ 28V
Potenza di uscita: 27dBm, 30dBm, 33dBm
Connettore antenna: SMA maschio
Fornire alla corrente 12v: 0.5A, 0.6A, 1A
Temperatura di funzionamento: -10 ~ +80 gradi
Precisione di rilevamento di tensione: ± 0.05V, ± 0.1V, 0.5V ±
Corrente precisione di rilevamento: ± 0.05A, ± 0.06AV, ± 0.2V
Video Larghezza di banda: 5 MHz, 6 MHz, 6 MHz
Video Impedenza: 75Ω / 1 Vp-p
Impedenza di ingresso audio: 6.5M Hz
Audio sottoportante: 4.7KΩ
Dimensioni: 60x35x20mm
Peso: 47g