Aerei

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

Avios has excelled yet again in bringing you another interesting and high-quality RC model, the Avios PBY Catalina. Avios are at the forefront of water plane technology; they have produced more types than any other manufacturer in this class of model. The Avios model captures the looks and great flying characteristics of the full-size plane with this stand-off scale model of the iconic World War II flying boat. The Catalina was one of the most widely used flying boats of the 2nd World War. It served with every branch of the United States Armed Forces, and the Avios version depicts a Catalina in the stunning US Coast Guard scheme of the early 1940s era.

This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.

Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.

Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.

Introducendo la nostra EPP 3D MX2. Caratterizzato da un design e il layout fantastico, questo tutti fuori PPE 3D'er in grado di soddisfare i piloti 3D più ansiosi!

E 'fusoliera è torsionale molto rigido ma leggero con un sacco di spazio sotto il lungo portellone superiore per la radio e sistema di alimentazione. L'ala è un affare di un pezzo con la costruzione del PPE, un preciso profilo alare simmetrico con 2 longheroni supplementari per ridurre al minimo flessione e torsione. Le superfici di controllo sono qualcos'altro - l'ascensore, il timone e gli alettoni sono dotate di una struttura a 3 strati (Epp-Depron-PPE) rendendo per superfici rigide e NO flessione in estrema getta! Snap rotoli 'Snap' e la risposta di controllo è istantanea.

La luce - ancora rigida - cellula aggiunge fino ad un grande volando 3D 'spumeggiante'. Cascate, albanelle, giri piatti, cerchi di rotolamento questo modello ha la precisione di eseguire queste e altre mosse si può pensare!

Montaggio della cellula in un processo rapido 10-15 minuti con l'aiuto di un piccolo mezzo CA. I layout di radio e del sistema di alimentazione sono molto semplici, il lungo portellone superiore rendendo per un facile accesso.

Questo è un grande modello per il General parco di volo e 3D hardcore. Si sarà difficile rompere questo modello, ci vorranno duri colpi e tenere solo rimbalzare ogni volta!


Caratteristiche:
• materiale di EPP resistente, leggero e resistente incidente
• superfici di controllo composito Stiff PPE / Depron
• Design rivoluzionario aggiunge l'integrità strutturale e la rigidità della cellula
• leggera fornisce carico alare ottimale
• Eccezionale prestazioni acrobatiche e manovrabilità 3D.
• Design semplice permette un facile accesso Impianti e apparecchi
• Il spiccano combinazione di colori ideale per l'orientamento


Specifiche:
Apertura alare: 955 millimetri
Lunghezza: 945 millimetri
Ala Area: 15.2dm2
Peso: 550g (senza batteria)




Richiede:
sistema radio a 4 canali
2217 950-1100KV Brushless Outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / dell'elica 11x4.7
4 x servi 9g

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

A replacement prop adapter for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement pair of spinners and backplates for the AVIOS KingTwin 1700.

A replacement 12x6 propeller for the H-King Swiss J-3 Piper Cub.

Please note: These parts will fit previous versions of the H-King 1400mm J-3 Cub, the colors where applicable will of course be different.

A replacement domed spinner with propeller hub assembly for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

A replacement Aerostar 3748-820KV brushless motor with mount and connectors for the AVIOS KingTwin 1700.

A replacement 3719-770KV brushless motor with prop adapter and X-Mount for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

Un motore brushless di ricambio 3648-700KV con adattatore per elica per l'H-King Swiss J-3 Piper Cub.

Nota: queste parti si adatteranno alle versioni precedenti dell'H-King 1400mm J-3 Cub, i colori, ove applicabile, saranno ovviamente diversi.

A replacement 2627-1000KV brushless motor with X mount and screws for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.