Aerei

Questa versione H-King del classico warbird F4U Corsair è prodotta in una schiuma EPO superbamente rifinita in un'autentica combinazione di colori blu scuro con le decalcomanie pre-applicate. Il Corsair è un velivolo molto stabile di per sé, per la maggior parte dei piloti, il giroscopio non è necessario. Tuttavia, per i principianti e per i piloti con poche ore, viene fornito un sistema di stabilizzazione del volo ORX a 6 assi che rende ancora più facile il volo. Il sistema di stabilizzazione utilizza un MCU a 32 bit e un giroscopio digitale a 6 assi per una risposta di controllo ultraveloce, può essere cambiato dalla modalità principiante a quella esperta man mano che la tua esperienza cresce.

H-King Avro Lancaster V3 "Dumbo" Replacement Fuselage w/Decals & Tailwheel.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Main Wings w/Decals.

Please note: No motors, ESC's or servos are included, these are the foam parts only.

H-King Avro Lancaster V3 "Dumbo" Replacement Horizontal Stabilizer w/Elevators.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Vertical Stabilizers.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Nose Dome (Bomb Aimers Dome) and Gun Turret Set.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

These optional servoless electric retracts have been designed for the H-King Avro Lancaster and include scale looking wheels, they are suitable for versions 1, 2, and 3.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

A replacement pre-painted fuselage for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement upper and lower pre-painted main wing set with ailerons, horns, and cabane strut fixings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted horizontal stabilizer with elevator, carbon joining spar, and bracing wire fixings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted battery hatch with canopy for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement scale spinner with backplate for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted motor cowl with a detailed dummy engine for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement set of inter-plane, and cabane struts for the Durafly Gloster Gladiator Mk1 Biplane Fighter (6 pieces).

A replacement main landing gear set with fairings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pair of scale main landing wheels with hubs and fixing screws for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement tail wheel assembly with wheel for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement 3719-770KV brushless motor with prop adapter and X-Mount for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement prop adapter for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement accessory pack that includes pushrods, pushrod keepers, and screws for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement scale detailing pack that includes dummy exhausts, machine guns, and air intake for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement decal set for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement rigging set that includes stranded flying wire and crimps for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A set of 4 replacement propeller blades for the H-King 800mm Hawker Tempest.

A replacement 3 blade propeller assembly with hub and screws for the H-King 750mm Chance Vought F4U Corsair.

A replacement spinner assembly with insert for the H-King 750mm Chance Vought F4U Corsair.

L'H-King P-51 "Galloping Ghost" è il primo di una nuova miniserie di H-King, i "Reno Aces", combattenti della seconda guerra mondiale vestiti per stupire alle gare aeree. Il P-51 "Galloping Ghost" con il motore brushless stock 3108-1070KV incluso offre un modello davvero veloce appena estratto dalla scatola con velocità che si avvicinano a 100 miglia all'ora quando si utilizza il LiPo 4S da 2200 mAh consigliato. Tuttavia, se sei una mano esperta e stai cercando velocità di oltre 100mph, allora c'è il motore brushless "Pro" 3108-1170KV opzionale drop-in fit. Ciò darà al tuo Reno Ace di bell'aspetto una prestazione davvero balistica con la stessa elica, ESC e batteria 4S per coloro che possono gestire la coppia di rotazione extra al momento del lancio.

Un set di ali di ricambio per l'H-King Reno Aces P-51 "Galloping Ghost". Include le coperture dei servi degli alettoni, le aste di spinta e le decalcomanie applicate in fabbrica

Un set di fusoliera di ricambio per l'H-King Reno Aces P-51 "Galloping Ghost", include decalcomanie applicate in fabbrica. Si prega di notare che il ponte superiore, il tettuccio e il cappuccio non sono forniti con questo set di fusoliera.

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

Una copertura di ricambio per boccaporto con tettuccio dorato per l'H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".