Aerei

Introducendo la nostra EPP 3D MX2. Caratterizzato da un design e il layout fantastico, questo tutti fuori PPE 3D'er in grado di soddisfare i piloti 3D più ansiosi!

E 'fusoliera è torsionale molto rigido ma leggero con un sacco di spazio sotto il lungo portellone superiore per la radio e sistema di alimentazione. L'ala è un affare di un pezzo con la costruzione del PPE, un preciso profilo alare simmetrico con 2 longheroni supplementari per ridurre al minimo flessione e torsione. Le superfici di controllo sono qualcos'altro - l'ascensore, il timone e gli alettoni sono dotate di una struttura a 3 strati (Epp-Depron-PPE) rendendo per superfici rigide e NO flessione in estrema getta! Snap rotoli 'Snap' e la risposta di controllo è istantanea.

La luce - ancora rigida - cellula aggiunge fino ad un grande volando 3D 'spumeggiante'. Cascate, albanelle, giri piatti, cerchi di rotolamento questo modello ha la precisione di eseguire queste e altre mosse si può pensare!

Montaggio della cellula in un processo rapido 10-15 minuti con l'aiuto di un piccolo mezzo CA. I layout di radio e del sistema di alimentazione sono molto semplici, il lungo portellone superiore rendendo per un facile accesso.

Questo è un grande modello per il General parco di volo e 3D hardcore. Si sarà difficile rompere questo modello, ci vorranno duri colpi e tenere solo rimbalzare ogni volta!


Caratteristiche:
• materiale di EPP resistente, leggero e resistente incidente
• superfici di controllo composito Stiff PPE / Depron
• Design rivoluzionario aggiunge l'integrità strutturale e la rigidità della cellula
• leggera fornisce carico alare ottimale
• Eccezionale prestazioni acrobatiche e manovrabilità 3D.
• Design semplice permette un facile accesso Impianti e apparecchi
• Il spiccano combinazione di colori ideale per l'orientamento


Specifiche:
Apertura alare: 955 millimetri
Lunghezza: 945 millimetri
Ala Area: 15.2dm2
Peso: 550g (senza batteria)




Richiede:
sistema radio a 4 canali
2217 950-1100KV Brushless Outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / dell'elica 11x4.7
4 x servi 9g

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Bixler 1.1 is a proven platform for beginners right through to intermediate pilots. Well known for stability, the Bixler is also an excellent choice for an inexpensive FPV platform and perfect for those lazy Sunday afternoons.

This version of the Bixler 1.1 is not supplied with a motor, ESC, servos, or RC equipment, it allows you to choose yourself the components you wish to use. Whatever you are looking for, the Bixler 1.1 has it covered.

This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.