Velivoli

A replacement 7.4V 350mAh modular lithium battery for the RC ERA MBB BO-105 flybarless helicopter.

A replacement smart 7.4V 1200mAh modular lithium battery with an intelligent management system for the RC ERA MD500 range of flybarless helicopters.

Introducendo la nostra EPP 3D MX2. Caratterizzato da un design e il layout fantastico, questo tutti fuori PPE 3D'er in grado di soddisfare i piloti 3D più ansiosi!

E 'fusoliera è torsionale molto rigido ma leggero con un sacco di spazio sotto il lungo portellone superiore per la radio e sistema di alimentazione. L'ala è un affare di un pezzo con la costruzione del PPE, un preciso profilo alare simmetrico con 2 longheroni supplementari per ridurre al minimo flessione e torsione. Le superfici di controllo sono qualcos'altro - l'ascensore, il timone e gli alettoni sono dotate di una struttura a 3 strati (Epp-Depron-PPE) rendendo per superfici rigide e NO flessione in estrema getta! Snap rotoli 'Snap' e la risposta di controllo è istantanea.

La luce - ancora rigida - cellula aggiunge fino ad un grande volando 3D 'spumeggiante'. Cascate, albanelle, giri piatti, cerchi di rotolamento questo modello ha la precisione di eseguire queste e altre mosse si può pensare!

Montaggio della cellula in un processo rapido 10-15 minuti con l'aiuto di un piccolo mezzo CA. I layout di radio e del sistema di alimentazione sono molto semplici, il lungo portellone superiore rendendo per un facile accesso.

Questo è un grande modello per il General parco di volo e 3D hardcore. Si sarà difficile rompere questo modello, ci vorranno duri colpi e tenere solo rimbalzare ogni volta!


Caratteristiche:
• materiale di EPP resistente, leggero e resistente incidente
• superfici di controllo composito Stiff PPE / Depron
• Design rivoluzionario aggiunge l'integrità strutturale e la rigidità della cellula
• leggera fornisce carico alare ottimale
• Eccezionale prestazioni acrobatiche e manovrabilità 3D.
• Design semplice permette un facile accesso Impianti e apparecchi
• Il spiccano combinazione di colori ideale per l'orientamento


Specifiche:
Apertura alare: 955 millimetri
Lunghezza: 945 millimetri
Ala Area: 15.2dm2
Peso: 550g (senza batteria)




Richiede:
sistema radio a 4 canali
2217 950-1100KV Brushless Outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / dell'elica 11x4.7
4 x servi 9g

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 1600 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 2000 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.

Looking for the perfect RC trainer plane? How about a smooth RC glider or an inexpensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The HobbyKing Bixler 2 does all that and more! This electric RC plane has undergone some major improvements including (but not limited to) bigger air inlets for better motor cooling of the uprated motor for even better performance. 

Migliorando il Bixler 2, questo ultimo modello è il perfetto aereo da addestramento RC, l'aliante RC perfetto e il perfetto aereo FPV per principianti. Collega la tua telecamera di volo al muso o al tettuccio dell'aereo per goderti la visuale in prima persona durante il volo. L'aereo Bixler 3 PNF è un modello plug-and-fly che richiede un sistema radio e una batteria.

Caratterizzato da una nuova combinazione di colori, il contrasto dinamico e le strisce sul lato inferiore facilitano l'orientamento. Il motore è stato aggiornato a un Outrunner Brushless 2620-1400KV per tempi di volo più efficienti. Accoppia questo aereo in schiuma RC elettrico con una batteria LiPo 3S 20C da 2200 mAh, nonché un trasmettitore e ricevitore a 6 canali da 4GHz per un volo ottimale.

If you're looking for a fast, fun, aerobatic sports model that can be flown just about anywhere, the H-King Super Kinetic is what you're after! From high-speed aerobatics including pylon style "bank and yank" flying to off-power gliding, the H-King Super Kinetic handles it all with ease. It's a truly versatile model that is a blast to fly.

L'H-King Crusader 30E si basa sul classico design del bastone. Questo aereo RC elettrico può essere pilotato sia da principianti che da esperti. È realizzato in tela leggera e balsa verniciata con uno schema di colori ad alto contrasto. Il Crusader risalterà a terra e in aria nel tuo hobby club locale.

Made of tough EPO, the Phoenix V2 glider fuselage has been blow moulded with pylon formers to make it near indestructible. The Phoenix was made to last a lifetime with its smooth, rigid, yet remains light enough for the glider to perform. Assembly can be completed in under 15 minutes so you'll be flying in no time.

Il Durafly SlowPoke è un modello in schiuma EPO dal design classico. Aggiungendo al design di volo facile di SlowPoke, Durafly ha aggiunto alcune ruote più grandi per rendere ancora più facile il decollo e l'atterraggio su un'ampia varietà di campi. Un grande aereo per il tuo primo taildragger ad ala bassa o per il pilota esperto esigente che desidera un aereo di bell'aspetto e facile da volare.

Il Bixler 1.1 è un collaudato aereo RC elettrico per i principianti fino ai piloti intermedi. Ben noto per stabilità, durata e prezzo accessibile, il Bixler 1.1 è uno dei migliori aerei RC per principianti sul mercato. È anche una scelta eccellente come piattaforma FPV economica e perfetta per quei pigri pomeriggi del fine settimana.

Questo bellissimo piccolo corridore può far risalire la sua discendenza al famosissimo Orso Raro che abbiamo venduto alcuni anni fa. Questo è stato un parkflyer molto veloce basato sui Reno Racers che è stato incredibilmente divertente da volare, è stato molto duro ed è diventato uno dei preferiti estremamente rapidamente.

The Phoenix 2400 is the largest glider in the Phoenix range. It comes with an almost indestructible ABS plastic hull and strong EPO foam wings and tail section. With its smooth, stiff hull, the Phoenix is ​​durable for a lifetime and yet light enough for the glider to work without any problems. An additional canopy with camera mount is included. Once you have your camera installed, you can either enjoy FPV flying or just take pictures of your flights.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

Il Wargo Signature Edge 540T 3D è un altro incredibile aereo della serie ispirata al famoso pilota 3D Michael Wargo. L'Edge 540T è stato specificamente progettato per il volo 3D molto preciso e l'addestramento acrobatico. Michael Wargo, il pilota del nostro team ed esperto di 3D, voleva un aereo in schiuma che fosse più rigido e leggero di altri schiumosi. Ciò è stato ottenuto dalla combinazione di un telaio in balsa rigido e leggero ricoperto di schiuma EPP leggera e resistente agli urti.

The OrangeRx R615X offers true DSMX compatibility and utilizes a dual antenna system to provide true signal reception diversity. Due to the previously used IC becoming obsolete, this latest R615X receiver has been redesigned, and now offers improved range and performance. Features that have been retained are the programmable failsafe on binding, ultra-fast brown-out recovery, and wide voltage input range. As we can maintain the same low price as before, this makes the latest R615X still unbeatable value for money.

Il SonicModell Baby AR Wing PRO è un'ala volante dinamica, robusta e compatta che garantisce prestazioni impressionanti. Il Baby AR è dotato di ali staccabili, per cui non è necessario l'uso di colla durante l'assemblaggio e le ali possono essere facilmente rimosse per il trasporto. Altre caratteristiche sono un ampio alloggiamento per la batteria, un alloggiamento per la telecamera frontale per il volo FPV e un esclusivo sistema di cerniere "FlexiLock" che fornisce una superficie di controllo senza attrito.

L'AR Wing PRO di SonicModell è un'ala volante a corpo libero resistente, dinamica ed efficiente che offre prestazioni impressionanti con stile. L'AR Wing PRO è dotato di ali staccabili, che non necessitano di colla, e può essere facilmente rimosso per il trasporto. Altre caratteristiche sono un ampio alloggiamento per la batteria e il controller di volo, un alloggiamento per la telecamera frontale per il volo FPV che si adatta a DJI e ad altre telecamere, e numerosi scomparti per il trasmettitore FPV (molto spazio per i sistemi a lungo raggio) e il ricevitore RC, ecc. Questi scomparti sono dotati di sistemi di raffreddamento ad aria NACA progettati in modo aerodinamico per mantenere tutto fresco, compresa l'attrezzatura FPV.

L'AR Wing Classic di SonicModell offre prestazioni incredibili e versatilità. È dotato di ali staccabili e di estremità alari che possono essere facilmente rimosse per il trasporto. Dispone inoltre di uno spazioso alloggiamento per l'attrezzatura, oltre a un paio di alloggiamenti più piccoli, per cui c'è molto spazio per le batterie, l'attrezzatura radio e una serie di attrezzature FPV.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

The engineers at Durafly have come out with another easy to fly hand launcher, the Durafly Brewster F2A Buffalo. Prior to World War II the US Navy was looking for a monoplane to fly off their aircraft carriers and the Buffalo was the winner. The Durafly Buffalo comes in two stylish color schemes. The easy to see US Navy pre-war colors and the more “navelised”, early WWII US Navy colors.

The H-King A-1 Skyraider PNF is a realistic flying model of the original plane. It is made of strong EPO foam and is electric-powered which makes it ideal as a park flier. There is a built-in Gyro (or Flight Stabilizer) to make flying this plane even easier.

Questa versione H-King del classico warbird P-51D è fabbricata in una schiuma EPO superbamente rifinita in un autentico schema di colori blu e argento, oltre a tutte le decalcomanie applicate in fabbrica. Questa è la versione aggiornata V2 di questo modello popolare e ora viene fornito con un sistema di stabilizzazione del volo ORX a 6 assi integrato per rendere ancora più facile il volo. Il sistema di stabilizzazione utilizza un MCU a 32 bit e un giroscopio digitale a 6 assi per una risposta di controllo ultraveloce, può anche essere commutato dalla modalità principianti alla modalità esperto.