Velivoli

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

A replacement fuselage for the AVIOS Albatross V2, includes factory-applied decals, and water rudder.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement center wing section for the AVIOS Albatross V2, includes the 2 flaps.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement left-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement right-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement tail set for the AVIOS Albatross V2. This set includes the vertical and horizontal stabilizers, control horns, rudder, rudder servo with pushrod, and decals.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement canopy/cockpit hatch for the AVIOS Albatross V2, includes the clear window glazing.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of engine/motor cowls for the AVIOS Albatross V2.

Note: These are suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of wing floats for the AVIOS Albatross V2.

Note: These are also suitable for the Albatross V1, but of course the colors are different.

A replacement clear water rudder with spring for the AVIOS Albatross V2.

Note: This is suitable for the Albatross V1 as well.

A replacement nose cone for the AVIOS Albatross V2.

Note: This is also suitable for the Albatross V1.

A replacement set of decals for the AVIOS Albatross V2 US Coast Guard Flying Boat. 

A replacement fuselage with decals and canopy for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement wing set with flaps, ailerons, and decals for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement engine nacelle and cowl for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the US Coast Guard version of the Avios C-130 V2. Please note that this spare part is not suitable for the original versions of the C-130.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the Civilian Cargo version of the Avios C-130 V2.  Please note that this spare part is not suitable for the original versions of the C-130.

A replacement set of landing gear doors for the Civilian Cargo version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A complete replacement nose landing gear set which includes servoless retract unit, gear doors, actuators, wiring, and housing for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement main landing gear set which includes servoless retract unit, actuating rods, wheels struts, and axles for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A complete replacement set of decals for the Civilian Cargo version of the Avios C-130 V2.

A complete replacement set of decals for the US Coast Guard version of the Avios C-130 V2.

A replacement 2627-1000KV brushless motor with X mount and screws for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement prop adapter for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement carbon wing joining spar for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement set of scale detailing parts for the AVIOS KingTwin 1700.

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

Questo fantastico e superbo modello volante Avios KingTwin 1700 sport/scala si basa su un piccolo biturboelica e ricorda molto il tipo utilizzato dalle compagnie aeree charter militari o civili di tutto il mondo. Con così tante fantastiche combinazioni di colori disponibili per questo tipo di aeroplano, Avios ha deciso di produrre una semplice versione bianca. Questa semplice finitura bianca fornisce la tela bianca perfetta per produrre una combinazione di colori completamente unica e su misura di tua scelta.

Questa versione H-King di questo impressionante F-16 Fighting Falcon è realizzata in schiuma EPO ed è splendidamente rifinita in un'autentica combinazione di colori USAF con le decalcomanie preapplicate in fabbrica. L'H-King F-16 ha caratteristiche di volo eccezionali di per sé, vola come se fosse su rotaie, ma il giroscopio a 6 assi ORX preinstallato porta questo a un altro livello. I piloti di tutti i livelli di esperienza trarranno vantaggio dall'utilizzo dell'impostazione giroscopica intermedia, questo migliora davvero la stabilità e rende più fluido il volo, specialmente in condizioni ventose. Per i principianti e per i piloti con orari ridotti, il sistema di stabilizzazione del volo rende ancora più facile il volo. Utilizza un MCU a 32 bit per una risposta di controllo ultraveloce e dispone di 3 impostazioni, giroscopio disattivato, giroscopio attivato e modalità di allenamento. Nella modalità di allenamento, il giroscopio offre piena stabilità e limita anche la quantità di rollio e beccheggio che può essere utilizzata. In modalità giroscopio, questo dà una stabilità leggermente meno assistita e non limita il rollio o il beccheggio che può essere utilizzato, perfetto per acrobazie aeree fluide in stile jet. In modalità giroscopio spento, è esattamente questo, nessun giroscopio.

A replacement pre-painted fuselage for the Durafly Me-163B V2 "White 10" with tailwheel and factory-applied decals.

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted canopy/battery hatch for the Durafly Me-163B V2 "White 10" with pilot, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.