Velivoli

JST-SH 4Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 4
Pin Spacing: 1mm
Socket Size: 6.5x4.5x3.1mm

JST-SH 5Pin Female Plug with 200mm Wire Pigtail (5pcs)

JST-SH 8Pin Female Plug with 200mm Wire Pigtail (5pcs)

These plugs come fitted with 200mm wire tails.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

JST-SH 5Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 5
Pin Spacing: 1mm

JST-SH 6Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 6
Pin Spacing: 1mm

JST-SH 8Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

KingKong Self-tightening Prop Adapters (CW/CCW) (2 pairs)

These are designed for KingKong propellers and have two lugs on the bottom side.

Includes:
2 x Self-tightening Prop Adapters (CW)
2 x Self-tightening Prop Adapters (CCW)

nastro biadesivo eccellente per uso esterno. Questo nastro è sicura e imbottita.

Grande per l'utilizzo su applicazioni che richiedono un po 'di imbottitura, come ricevitori di montaggio, i controllori di volo o CES.

Specifiche:
Larghezza: 20mm
Lunghezza: 1.500 millimetri

Nylon Spacer 20mm M3 F/F Red (10pcs)

Specs:
Shape: Hex
Length: 20mm
Screw Thread: M3 Female/Female
Qty: 10 

Nylon Spacer 10mm M3 M/F Orange (10pcs)

Specs:
Shape: Hex
Length: 10mm
Screw Thread: M3 Male/Female
Qty: 10 

Durafly™ T-28 Trojan 1100mm V2 - Horizontal Tail

Durafly™ T-28 Trojan 1100mm V2 - D3536-750kv Motor inc X Mount

Durafly™ T-28 Trojan 1100mm V2 - Canopy inc FPV Pilot Tray.

Please note: This canopy will also fit the Durafly T-28 Trojan Naval Aviation Centennial Edition, but of course the color scheme is different.

Durafly™ T-28 Trojan 1100mm V2 - Control and Mounting Accessories

Durafly™ T-28 Trojan 1100mm V2 - Propeller Shaft and Spinner Nut

Spare Part - Cannon Blisters for Spitfire Mk5 ETO scheme (Green/Grey)

Spare Part - Fuselage for Spitfire Mk5 Desert Scheme

Painted with all the plastic parts and magnets (cowl NOT included)

Spare Part - Cannon Blisters for Spitfire Mk5 desert scheme

Durafly™ Excalibur  V tail set, this tail set fits both the V1 and V2 versions of the Excalibur.

Durafly™ Excalibur canopy, suitable for the Excalibur V1 and V2.

Durafly™ Excalibur slope soaring nose cone, suitable for the Excalibur V1 and V2.

Durafly™ Excalibur cowl, suitable for the Excalibur V1 and V2.

Durafly™ Excalibur top tail plate, suits the Excalibur V1 and V2.

Durafly™ Excalibur - Aerostar 3542-800KV Brushless Outrunner Motor

The Aerostar 3542 800Kv motor is a real powerhouse and provides the punch for the Durafly Excalibur, suits the V1 and V2 versions.

If you are looking for amazing performance for a powered glider or warm liner then this motor is a great choice.

Specs:
Size: 3542
KV: 800KV
Shaft Dia: 5.0mm
Bolt holes: 25mm and 19mm
Bolt thread: M3
Weight: 174g
Motor Plug: 3.5mm Bullet Connector

Durafly™ Excalibur - Propeller Shaft/Adapter.

Also suitable for the V2 version if used in conjunction with the V1 13x7 propeller assembly.

Durafly™ Excalibur - Decal Set