Velivoli

Durafly™ Excalibur - Decal Set

HobbyKing® ™ Walrus - Pezzo di ricambio - Vertical Fin e timone

HobbyKing® ™ Walrus - Pezzo di ricambio - Stabilizzatore orizzontale

HobbyKing® ™ Walrus - Pezzo di ricambio - Ala Spar

Specifiche:
Lunghezza: 300mm
Diametro: 5.5mm (7,8 millimetri al centro)

HobbyKing® ™ Walrus - Pezzo di ricambio - principale Ala w / Sticker Set

L'ASW 28 a grandezza naturale è un aliante di Classe Standard con una campata di quindici metri costruito con moderni compositi rinforzati con fibre. Il produttore dell'ASW-28 è Alexander Schleicher GmbH & Co. La "W" indica che è stato progettato dall'influente e prolifico designer tedesco Gerhard Waibel. La produzione in serie è iniziata nel 2000.

Made of tough EPO, the Phoenix V2 glider fuselage has been blow moulded with pylon formers to make it near indestructible. The Phoenix was made to last a lifetime with its smooth, rigid, yet remains light enough for the glider to perform. Assembly can be completed in under 15 minutes so you'll be flying in no time.

The Phoenix 2400 is the largest glider in the Phoenix range. It comes with an almost indestructible ABS plastic hull and strong EPO foam wings and tail section. With its smooth, stiff hull, the Phoenix is ​​durable for a lifetime and yet light enough for the glider to work without any problems. An additional canopy with camera mount is included. Once you have your camera installed, you can either enjoy FPV flying or just take pictures of your flights.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 1600 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 2000 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.

Looking for the perfect RC trainer plane? How about a smooth RC glider or an inexpensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The HobbyKing Bixler 2 does all that and more! This electric RC plane has undergone some major improvements including (but not limited to) bigger air inlets for better motor cooling of the uprated motor for even better performance. 

Improving on the popular Bixler 2, this latest kit is the perfect trainer plane or inexpensive FPV platform. Attach your flight camera into the nose or canopy of the plane to enjoy First Person View while flying. The Bixler 3 kit requires a motor, ESCs, a radio system and battery. 

Migliorando il Bixler 2, questo ultimo modello è il perfetto aereo da addestramento RC, l'aliante RC perfetto e il perfetto aereo FPV per principianti. Collega la tua telecamera di volo al muso o al tettuccio dell'aereo per goderti la visuale in prima persona durante il volo. L'aereo Bixler 3 PNF è un modello plug-and-fly che richiede un sistema radio e una batteria.

Caratterizzato da una nuova combinazione di colori, il contrasto dinamico e le strisce sul lato inferiore facilitano l'orientamento. Il motore è stato aggiornato a un Outrunner Brushless 2620-1400KV per tempi di volo più efficienti. Accoppia questo aereo in schiuma RC elettrico con una batteria LiPo 3S 20C da 2200 mAh, nonché un trasmettitore e ricevitore a 6 canali da 4GHz per un volo ottimale.

If you're looking for a fast, fun, aerobatic sports model that can be flown just about anywhere, the H-King Super Kinetic is what you're after! From high-speed aerobatics including pylon style "bank and yank" flying to off-power gliding, the H-King Super Kinetic handles it all with ease. It's a truly versatile model that is a blast to fly.

Il Bixler 1.1 è un collaudato aereo RC elettrico per i principianti fino ai piloti intermedi. Ben noto per stabilità, durata e prezzo accessibile, il Bixler 1.1 è uno dei migliori aerei RC per principianti sul mercato. È anche una scelta eccellente come piattaforma FPV economica e perfetta per quei pigri pomeriggi del fine settimana.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.