Velivoli

Dopo l'incredibile successo del primo Paramotore H-King, arriva questa V2. Questa versione presenta una nuova ala parafoil, molto più efficiente e stabile, in una vivace combinazione di colori. Questo lo rende molto più facile da far decollare e volare e aggiunge molta più stabilità in volo rispetto alla versione precedente. È in grado di effettuare decolli da terra anche con l'assistenza di un aiutante, e le lunghe toccate e fughe vengono eseguite con facilità. Un altro miglioramento è rappresentato dalle linee che collegano la gondola al parapendio: sono più robuste e molto più scorrevoli, per cui è meno probabile che si leghino l'una all'altra durante il lancio. Le altre novità sono i bracci dei servi trasparenti per un maggiore realismo, una barra luminosa a LED e un'elica bianca. Questa barra luminosa illumina la parte inferiore della vela e si riflette sull'elica bianca, permettendovi di divertirvi ancora di più con il vostro paramotore, consentendovi di continuare a volare nella zona crepuscolare.

After the success of the original H-King FLYCAT 70mm EDF jet, which was a basic aileron, elevator, and throttle-only model, we now have the FLYCAT V2. This new version has an upgraded power setup with a brushless inrunner motor and Aerostar RVS G2 ESC, twin rudders, a set of pre-installed electronic retracts, and a brand-new high-viz color scheme. It retains from the V1 its stunning streamlined looks, agility, performance, and impeccable flying characteristics.

With a new more powerful setup, the 2860-2100KV brushless inrunner motor and the 12-blade EDF unit make the Flycat V2 not only quite a bit faster, but it improves the verticals and it also sounds amazing, just like a real turbine, especially when doing fast, high-speed passes. Coupled with the motor and EDF unit is one of our Aerostar 80A RVS G2 speed controllers, this not only gives you solid reliability, it also offers you the choice of instant reverse. If you are flying from a hard runway this helps shorten the landing run quite considerably when selected after touchdown. Another feature of the FLYCAT V2 is the twin-rudders, these bring in another dimension when flying the V2. It is now able to perform even more jet-like maneuvers including falling leaves and knife-edge, etc, and they also help in the approach to landing and when flying at slower speeds. The new high-viz color scheme not only looks great, but it stands out well in the sky which helps orientation when flying big, fast aerobatic maneuvers. Last but not least on the V2 there is no need for hand-launching, it comes with a set of pre-installed grass-capable electronic retracts. These robust and reliable retracts enable smooth take-offs and landings on hard and grass runways

Questa terza versione del Durafly DH 100 Vampire segue i suoi predecessori per offrire una versione fantastica e ancora migliore di questo popolare jet EDF. Abbiamo aggiunto molti altri miglioramenti per rendere il migliore ancora migliore. Questi nuovi miglioramenti includono: ulteriori rinforzi in fibra di carbonio, montanti del carrello di atterraggio semplificati e più leggeri, condotti e tubi di spinta migliorati per aumentare le prestazioni, muso in plastica per una maggiore protezione e carenature in plastica per il montaggio del retrattile.

"Impara a volare nella Tundra Way" con il Prime Tundra PT1200. Questa è un'altra aggiunta alla serie Tundra estremamente popolare di aeroplani STOL (Short Take-Off and Landing) di Durafly, ma questo è rivolto principalmente, ma non esclusivamente, ai principianti. Il PT1200 è l'allenatore STOL perfetto per coloro che vogliono entrare in questo stile di volo, poiché eredita le eccellenti caratteristiche di volo STOL del lignaggio Tundra, è anche molto divertente anche per i fan più esperti della Tundra!

This third version of the Durafly DH 100 Vampire follows on from its predecessors to deliver a fantastic even better version of this popular EDF jet. We have added many more improvements so that the best has got even better. These new improvements include, additional carbon-fiber reinforcement, simplified and lighter landing gear struts, improved ducting and thrust pipe for increased performance, plastic nose for added protection, and plastic retract mount fairings.

This version of the Vampire DH100 is finished in a Royal Canadian Air Force (RCAF) color scheme, this scheme was selected for its history and its orientation when flying. The RCAF obtained their Vampires in late 1948, and being their Air Force's first-ever jet fighter, they were an instant hit with the RCAF aircrew and pilots. The Vampire had an outstanding performance and graceful lines, this Durafly version captures these attributes beautifully.

The Durafly Carbon Arcus is a sleek and beautiful F3A biplane designed to perform smooth, F3A-style pattern aerobatics and is the perfect choice for honing your aerobatic skills. It features a durable, lightweight EPO airframe with carbon reinforcement, aluminum landing gear, carbon interplane struts, and an advanced 4S motor and prop combination that offers a high power-to-weight ratio for unending verticals and incredible performance.

Flying the Arcus F3A is a dream, the long tail moment, the low wing loading, and the abundance of power give you a stable and predictable airplane. Take-offs require very little rudder input, rolls are crisp and axial, and loops can be as large as you wish. The large propeller provides ample braking action in the downlines to avoid overspeeding, and if you enjoy flying knife-edge, then the Arcus II performs this with ease. No roll or pitch coupling here, just apply a touch of rudder, control the throttle to hold your line, and the Arcus will knife edge until the cows come home. Finally, when the time comes, throttle back, and the Carbon Arcus settles into a nice sink rate for a perfect 3-point landing every time.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.

The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

Il Durafly Me-163B è stato progettato per i piloti con una certa esperienza, beneficia di incredibili prestazioni di volo, grande stabilità in tutta la sua gamma di velocità e, come la cosa reale, è incredibilmente veloce. L'acrobazia che include enormi loop, rolli verticali fuori dalla vista e passaggi bassi molto veloci sono facilmente realizzabili, ma rallenta ed è molto stabile, senza alcun accenno di stallo. Utilizzando la batteria LiPo da 2200mAh 30-65C 4S consigliata e l'elica 6x4 in dotazione, puoi aspettarti tempi di volo ben oltre i 5 minuti e un'abbondanza di potenza. Se ami la velocità e i modelli molto veloci, allora questo è per te, il Komet Me-163 è balistico, con velocità che si avvicinano a 100mph.

The XFLY A-10 Thunderbolt II is a small, scale twin-EDF model of the iconic US Air Force close attack fighter that is perfect for flying in smaller areas such as local parks, sports fields, etc. The full-size A-10 Thunderbolt affectionately known as the "Warthog", was mainly used for close air support for ground troops and armored vehicles. It was highly maneuverable due to its large ailerons, was very tough and durable, could take a lot of punishment, and it "pièces de résistance" was the Gatling gun mounted in the nose. The actual airframe was designed around this high-powered 30mm gun, it was one of the most powerful guns ever fitted to a plane and could fire up to an amazing 4,200 rounds per minute.

Avios has excelled yet again in bringing you another interesting and high-quality RC model, the Avios PBY Catalina. Avios are at the forefront of water plane technology; they have produced more types than any other manufacturer in this class of model. The Avios model captures the looks and great flying characteristics of the full-size plane with this stand-off scale model of the iconic World War II flying boat. The Catalina was one of the most widely used flying boats of the 2nd World War. It served with every branch of the United States Armed Forces, and the Avios version depicts a Catalina in the stunning US Coast Guard scheme of the early 1940s era.

L'incredibile Avios C-130 è tornato con due nuove combinazioni di colori ad alta visibilità, vivaci e più leggere, oltre a una serie di altri miglioramenti. I miglioramenti sul V2 sono principalmente volti a ridurre il peso per migliorare le caratteristiche di manovrabilità del volo lento. Come la versione originale, il C-130 V2 è completato al più alto livello di dettaglio della scala, ha un'apertura alare di 1600mm e misura oltre un metro di lunghezza.

XFLY is continuing to expand its incredible range of EDF models with this fantastic-looking Lockheed Martin F-22 Raptor. It is a small, scale twin-EDF model of the supersonic all-weather stealth fighter that was developed for the United States Air Force. The US Air Force requirement was for an advanced tactical fighter to replace the F-15 Eagle and the F-16 Fighting Falcon that had the capability of competing with the Su-27 Flanker, and MiG-29 Fulcrum.

Il Durafly Night Tundra segue le orme della popolare e consolidata serie Tundra. Non devi più finire di volare quando il sole tramonta, con l'incredibile sistema di luci super luminoso della Tundra Notturna puoi semplicemente andare avanti nel crepuscolo e oltre. La tundra notturna conserva le caratteristiche di volo senza limiti della tundra originale. Che si tratti di un volo da campi accidentati, acqua, neve o sabbia, acrobazie aeree, traino di alianti, lancio di caramelle (con parte opzionale) o semplicemente un buon volo lento super STOL vecchio stile, il Night Tundra affronta tutto facilmente. La sua struttura in schiuma EPO leggera ma robusta e ben rifinita, la potente configurazione senza spazzole e il design perfettamente armonizzato ti danno immediatamente una sensazione di sicurezza sui bastoncini con la stessa rapidità con cui ti fa sorridere.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

Quando Durafly ha lanciato l'Auto-G originale, ha alzato il livello di qualità essendo il primo autogiro Plug-N-Fly sul mercato, e questo livello è stato ulteriormente alzato con l'Auto-G2 V2. Come da tradizione Durafly, l'Auto-G2 è semplice e veloce da assemblare, vola molto bene e ha un aspetto sorprendente in volo. Gli aggiornamenti della V2 includono l'aggiunta di una resistente piastra di testa in nylon rinforzato con fibre da 2mm, aste di spinta rinforzate con fibre, un albero principale completamente incassato, un carrello di atterraggio più largo e più robusto con grandi ruote in schiuma leggera tipo bush, e un motore con copertura, oltre a un'elettronica interna più piccola che offre più spazio per la batteria di volo.

Questo fantastico e superbo modello volante Avios KingTwin 1700 sport/scala si basa su un piccolo biturboelica e ricorda molto il tipo utilizzato dalle compagnie aeree charter militari o civili di tutto il mondo. Con così tante fantastiche combinazioni di colori disponibili per questo tipo di aeroplano, Avios ha deciso di produrre una semplice versione bianca. Questa semplice finitura bianca fornisce la tela bianca perfetta per produrre una combinazione di colori completamente unica e su misura di tua scelta.

L'incredibile Frenzy è il perfetto tuttofare. Con lanci di controllo ridotti, è un aeroplano fluido, stabile e straordinariamente facile da pilotare, perfetto per il principiante o il principiante. Aumenta quei lanci e, con il suo elevato rapporto peso/potenza su una configurazione 3S, il Frenzy è all'altezza del suo nome. È in grado di eseguire un'ampia gamma di incredibili manovre acrobatiche e soddisferà le esigenze anche del pilota acrobatico più ambizioso.

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

Dopo il successo dell'EFX Racer, si è deciso di produrre una versione mini, come si suol dire, tutte le cose belle arrivano anche in piccole confezioni, così è nato l'MFX Racer. L'MFX è stato progettato secondo gli stessi rigorosi standard dei suoi fratelli maggiori e offre ancora velocità, forza, agilità e la stabilità che ci si aspetta da un modello Durafly. Inoltre, offre la semplicità di montaggio e la qualità che solo un modello EPO di Durafly può offrire.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

L'H-King Viper 64 è conveniente, molto stabile e con qualità di pilotaggio prevedibili, il che lo rende la scelta ideale per chi si avvicina per la prima volta ai jet EDF. Ha un aspetto straordinario e le prestazioni del suo set-up a 6S gli conferiscono una fantastica velocità e la capacità di eseguire grandi manovre in stile jet, il che lo rende anche il jet sportivo perfetto per i piloti RC più esperti. L'H-King Viper 64 si basa su un piccolo jet biposto autocostruito progettato dalla Viper Aircraft Corporation negli Stati Uniti alla fine degli anni Novanta.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

Dopo il successo dell'EFX Racer, si è deciso di produrre una versione mini, come si suol dire, tutte le cose belle arrivano anche in piccole confezioni, così è nato l'MFX Racer. L'MFX è stato progettato secondo gli stessi rigorosi standard dei suoi fratelli maggiori e offre ancora velocità, forza, agilità e la stabilità che ci si aspetta da un modello Durafly. Inoltre, offre la semplicità di montaggio e la qualità che solo un modello EPO di Durafly può offrire.

Con un numero minimo di pezzi e di tempi di assemblaggio, l'MFX Racer si aggancia e si avvita in meno tempo di quanto ne occorra per caricare una batteria. L'MFX Racer con la sua configurazione a 4S è veloce, ma è ancora eccezionalmente stabile e dà al pilota quella sensazione di blocco. Tuttavia, a differenza della maggior parte delle macchine da velocità, ha anche un'eccezionale maneggevolezza a bassa velocità. Con il suo controllo a 4 canali, l'MFX Racer è anche molto acrobatico, con grandi looping, rollate veloci, bordi a coltello, scatti e rotazioni, l'MFX Racer può fare tutto e di più, il suo unico limite sei tu, il pilota! L'MFX ha due opzioni per le estremità alari (entrambe sono fornite nella confezione), un'opzione standard da 815 mm o un'opzione con ala tagliata da 715 mm. La configurazione standard dell'ala offre un tasso di salita molto migliore, mentre la configurazione con ala tagliata aumenta drasticamente il tasso di rollio.