Todos los Receptores

Walkera F210 Quad Racing - DEVO-RX713 Receptor

Número de parte: F210-Z-25

In the world of racing drones the requirements are for small and light weight components. The FS-A8S receiver fits these requirements superbly, being only 20x14x5.3mm and 1.2g.

The FS-A8S is built for use in multi-rotor drones and is a 1-way receiver (no telemetry). It uses the extremely stable AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 18 channels.

 This is an excellent receiver to add to your Turnigy Evolution, Turnigy i6S and Turnigy i10 radios.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Designed with space-saving and light weight in mind to fit into the smallest of drones, Frsky's XM+ Micro Ultra-Light 16 Channel receiver is no lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe and up to 1km range, the XM+ is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7 and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

Designed with space-saving and lightweight in mind to fit into the smallest of drones, Frsky's XM Plus Micro Ultra-Light 16-Channel receiver is not lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe, and up to 1km range, the XM Plus is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7, and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

The Corona R6SF 2.4GHz S-FHSS compatible 6Ch receiver is designed for use with Futaba S-FHSS/FHSS 2.4GHz transmitters, such as T4YF/T6J/T6K/T8J/T10J/T14SG/T18MZ & T18SZ air systems or 3PL/T3PRKA/4PLS/T4PX or T4GRS using S-FHSS/FHSS RF protocol.

When working in "Special mode" the R6SF can output up to 8 channels using S.bus to allow greater flexibility in performance as well as a convenient way to reduce the wire count in tight installations.

The top of the range, 16 Channel X8R receiver from FrSky with 8 normal PWM outputs and no less than 16 channels on the dedicated S.BUS output. Now supplied with the 2015 firmware to compy with EU regulations.

This is an outstanding receiver for all applications and is perfect for use with the FrSky Horus, X9D and X9E Taranis transmitters, with their built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

The FrSky RX8R has been upgraded to the PRO version but retains all the old features. The new PRO version has increased precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. It also has improved anti-interference from the ignition system on combustion engines.

The Turnigy GT5 receiver is perfectly matched to work with the outstanding Turnigy GT5 6CH 2.4GHz AFHDS 2A Surface Radio to provide the most reliable link. Stop changing receivers from model to model and get an extra receiver now.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

El receptor FLYSKY FGR4S utiliza el nuevo protocolo AFHDS3 (sistema digital de salto de frecuencia automático de tercera generación). Utiliza una única antena interna para transmisión bidireccional y es de tamaño compacto y fácil de instalar. Puede emitir señales PPM e i-BUS estándar. Es una gran adición a su radio de superficie FLYSKY Noble NB4.

The FrSky TW R8 is an 8-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 8 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

The FrSky TW R6 is a 6-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 6 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

Compatible con Futuba Fasst transmisores de la Corona R14FA ofrece una alternativa asequible para los usuarios de radio Futaba.

Especificaciones:
Corriente de funcionamiento:
70mA @ FASST modo de 7 canales normales y 110 mA máx,
@ 80mA modo multi-canal de FASST normal y 110 mA máx
Tensión de funcionamiento: 4.0 ~ 10V
Estado latente:
7 ms para la alta velocidad de PPM (SA), 14ms para el modo de baja velocidad de PPM (LS) @ FASST multicanal,
8 ms para, de 16 ms para la baja velocidad de PPM @ modo de 7 canales (LS) FASST alta velocidad de PPM (SA)
Sensibilidad: -96dBm ~
Fail Safe: Sí
Tamaño: 53x37x16mm
Peso: 22g
Longitud de la antena: 136mm

Compatibilidad:
transmisores de 2,4 GHz FUTABA FASST
TM7, TM8, TM10, TM14, 6EX-2.4G, 2.4G-7C, 8FG, 10CG, 12FG

El adaptador convertidor Junta RMILEC es la solución perfecta para permitir una fácil conexión a un receptor SBUS. El adaptador T4363NB18 soporta la fuente de alimentación de 5 V y se puede utilizar no sólo para hacer coincidir 12FG o 14MZ transmisores pero también puede ser colocado individualmente en otro lugar como una estación de retransmisión.

El panel se suministra con el hardware, incluyendo conectores de la batería JST, de encendido / apagado, terminales, instalaciones y accesorios.

Tenga en cuenta: Se requiere la soldadura de encendido / apagado y terminales.

Especificaciones:
Material: PCB
Peso: 39.65g
Dimensiones: 90 x 115 mm

FrSky TFR6 7 canales receptor de 2,4 GHz FASST Compatible

Compatibilidad:
FASST 2.4G: Air Systems (modo 7CH / Modo Multi)
Los módulos TF FrSky: TF-8M, TF-14M


caracteristicas:
El peso ligero y pequeño tamaño
Dos opciones de configuración a prueba de fallos seleccionables


Presupuesto:
Número de canales: 7
Tensión de funcionamiento: 3.5V ~ 10V
Rango de temperatura: -10C ~ 60C
Dimensión: 37 * 22 * 8 mm
Peso: 7,8 g

El FrSky S.Bus a PWM decodificador le permite utilizar cualquier servos digitales y analógicos estándar o con su receptor compatible S.Bus. Esto elimina la necesidad de utilizar servos específicos S.Bus caro que le permite utilizar sus modelos existentes servos.

Con 4 salidas de los canales programables, se puede asignar de forma independiente cada servo a un canal de su elección mientras que sólo el tener que conectar el cable de una entrada de su receptor. Esto hace que su cableado mucho más ordenado y permite una fácil configuración de los servos sin la necesidad de la ejecución de múltiples cables de extensión.

Este es un gran dispositivo para utilizar en conjunción con nuestros receptores compatibles naranja y 7CH 9CH S.Bus!

incluye:
FrSky S.Bus a PWM Decoder

Especificaciones:
Las salidas de los canales programables: 4
Canal de salida de la señal de plomo longitudes: 200mm
Longitud total: 350 mm

* Nota: FrSky Servo Canal cambiador requerida (se vende por separado, consulte los artículos relacionados a continuación) para cambiar la asignación de las salidas de los canales.

Proteja su receptor OrangeRx de los daños y las vibraciones con esta shell.Fits de silicona de protección cómodamente alrededor de la mayoría de los receptores de satélite y no tiene orificios de salida en la parte posterior y lateral de las antenas.

Especificaciones:
Longitud: 44,5 mm
Ancho: 25mm
Altura: 16 mm
Peso: 6g

Proteja sus receptores Naranja del combustible o por accidente daños con el RX de caucho de silicona naranja
Cáscara. La carcasa proporciona una protección adicional para el corazón de su modelo RC mientras que también proporciona
opciones de fijación adicionales. La parte trasera de la carcasa tiene una ranura para permitir el uso de gancho y las cintas del lazo de sujeción, se proporcionan ranuras adicionales para la antena y el satélite de puerto del receptor.

Especificaciones:
Receptor adecuados: Naranja R620
Material: Caucho de silicona
Color: Negro
Dimensiones: 46 x 25 x 17 mm
Peso: 4,4 g

Proteja su receptor OrangeRx de los daños y las vibraciones con esta shell.Fits de silicona de protección cómodamente alrededor de la mayoría de los receptores de satélite y que tiene un orificio de salida en la parte posterior de la antena y un corte en el lado de la clavija receptor de satélite.

Especificaciones:
Longitud: 47.5mm
Ancho: 25mm
Altura: 16 mm
Peso: 8g