Sistemas de Poder

El receptor FLYSKY FGR4S utiliza el nuevo protocolo AFHDS3 (sistema digital de salto de frecuencia automático de tercera generación). Utiliza una única antena interna para transmisión bidireccional y es de tamaño compacto y fácil de instalar. Puede emitir señales PPM e i-BUS estándar. Es una gran adición a su radio de superficie FLYSKY Noble NB4.

El OrangeRx TX10i es el primo mayor del popular OrangeRx TX6i. Viene con muchas características excelentes, como estilo ergonómico, cardanes de efecto Hall, antena interna y ahora con 10 canales para que pueda usar más mezclas y características que antes para tener un mejor control sobre su modelo (ya sea un avión / planeador, helicóptero o multirotor).

Si le preocupa rayar la pantalla del Evolution PRO o dañar una palanca de control durante el transporte, esta cubierta cumple con todos sus requisitos. Simplemente hace clic en la parte frontal de su controlador para proteger de forma segura la pantalla y los palos. Viene en blanco o negro.

Si le preocupa rayar la pantalla del Evolution PRO o dañar una palanca de control durante el transporte, esta cubierta cumple con todos sus requisitos. Simplemente hace clic en la parte frontal de su controlador para proteger de forma segura la pantalla y los palos. Viene en blanco o negro.

Corona DS-560WP is a fantastic standard servo. Comes with excellent features such as it is waterproof, has ball bearings and metal gears. Precise control and minimal dead-band width, they are an excellent choice. An excellent choice for cars and boats.

The FrSky TW R8 is an 8-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 8 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

The FrSky TW R6 is a 6-channel, dual 2.4GHz frequency receiver with SBUS/FBUS/S.Port, and 6 PWM channels. These TWIN series receivers feature a stable TW protocol that benefits from simultaneously integrating dual active 2.4GHz frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions used by other manufacturers. This is where one receiver takes over signal control only when the other goes into failsafe mode. With the TW protocol, the dual/twin 2.4GHz frequency bands on the TW series receiver are active all the time.

A replacement 13g metal-geared servo for the Avios Kobuz Sports-Scale Aerobatic Glider. Used for the ailerons, rudder, and elevator controls.

A replacement 9g metal-geared flap servo for the Avios Kobuz Sports-Scale Aerobatic Glider. 

The 9iMOD BLS-HV20KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV20KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than RC cars including robotics, etc.

The 9iMOD BLS-HV30KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.075sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV30KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV40KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 40kg, and a speed of 0.085sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV40KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 40kg, and a speed of 0.085sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than RC cars including robotics, etc.

The 9iMOD BLS-HV50KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 50kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV50KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 50kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV60KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 60kg, and a speed of 0.11sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV60KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 60kg, and a speed of 0.11sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV70KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you an amazing torque of 70kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV70KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you an amazing torque of 70kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD DS35MG digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 35kg, and a speed of 0.25sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.

The 9iMOD DS35MG digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 35kg, and a speed of 0.25sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 270° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.

The 9iMOD DSC55MG-180 digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The servo is waterproof to IP67 standards, and it also includes an aluminum center for heat dissipation, a high-precision magnetic encoder sensor, and a coreless motor. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 55kg, and a speed of 0.09sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.

The 9iMOD DSC55MG-270 digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The servo is waterproof to IP67 standards, and it also includes an aluminum center for heat dissipation, a high-precision magnetic encoder sensor, and a coreless motor. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 55kg, and a speed of 0.09sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 270° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.