Área de Liquidación

Cuando se trata de hardware, la calidad no importa! Estos tornillos de titanio no sólo ofrecen una mayor resistencia a lo largo de acero, también son mucho más ligeros en peso. Estos son ideales para su uso en modelos de comportamiento, cuando el afeitado de peso es absolutamente crítico, o para cualquier proyecto que requiera alta resistencia, peso ligero de hardware.

Especulación.:
Tamaño: M4 x 8 mm
Peso: 0,81 g (cada uno)

The Rocket Surpass range of brushless motors is precision-made using the latest manufacturing processes. The heatsink can is CNC machined from a solid billet of 6061 T6 aluminum, high-purity copper is used for the windings for improved efficiency, and oversized ABEC5 high-speed bearings are used for durability. The stator has super thin (0.35mm) laminations, and the rotor is then precision balanced for reliability and ultra-smooth running at maximum RPMs.

The Rocket Surpass KK2845-5900KV motor has been specially built for 1/12~14th size RC cars and trucks and is totally waterproof for use in extreme conditions. This powerful 4-pole, 12-slot motor features a universal mounting system so that it will fit just about all 1/12~14th scale vehicles.

Se trata de un pequeño dispositivo muy útil que se utiliza para secuenciar las puertas del tren de aterrizaje y tren de aterrizaje tanto durante la extensión y retracción.

Con el uso de spitter lleva usted es capaz de secuenciar todo un sistema de engranajes y la puerta en muchos modelos que requieren la secuenciación correcta a partir de una sola de estas unidades y de un solo canal en su receptor.

Hay dos tipos de secuencia seleccionable y hay un folleto de instrucciones incluido.

Especificaciones:
Dimensiones: 52x18x5mm
Rango de tensión: 4.8-6.0v
Peso: 5,5 g

* El color puede variar

Se trata de una cabina todos cortados con láser de capas que tiene un sistema integrado y se monta Giro horizontal y vertical para un sistema de FPV completa. El marco de base tiene disposiciones para el transmisor de FPV, el cableado y la batería. El sistema de movimiento horizontal y vertical tiene 2quick liberar posiciones de montaje, la posición hacia adelante dando una visión clara sin obstrucciones, así la posición de montaje posterior le permite reutilizar el dosel Lexan para una elegante plataforma FPV aerodinámica. El Giro horizontal y vertical tienen un servo de 180 grados para la sartén y un 90 grados de inclinación (no incluidas). Hay varios agujeros de montaje y de acceso para dar cabida a una amplia gama de cámaras FPV de tablero en el estilo cubo.

El marco de base tiene disposiciones para el transmisor de FPV, el cableado y la batería. El sistema de movimiento horizontal y vertical tiene 2quick liberar posiciones de montaje, la posición hacia adelante dando una visión clara sin obstrucciones, así la posición de montaje posterior le permite reutilizar el dosel Lexan para una elegante plataforma FPV aerodinámica. El Giro horizontal y vertical tienen un servo de 180 grados para la sartén y un 90 grados de inclinación (no incluidas). Hay varios agujeros de montaje y de acceso para dar cabida a una amplia gama de cámaras FPV de tablero en el estilo cubo.

caracteristicas:
• Construcción Lasercut pre-construido
• Puede ser adaptado a otros planos
• 2 posiciones de montaje para la bandeja de liberación rápida y la inclinación
• Montaje disposiciones para un sistema completo FPV

Especificaciones:
Peso: 78g
Tamaño: 98x96x221mm WxHxL
Montaje: en forma directa para el plano FPV PC Hawkeye 1700 (se puede adaptar a otros)

Necesario:
2 x servos 9g, recomiendan 180 grados y Metal Gear.

Ligera Ronda de aluminio Sección espaciador M3x38mm (plata) (10 piezas)

separadores de aluminio ligera caracterizada por una sección transversal redonda y una sección hexagonal (en cada extremo) para encajar una llave de 5 mm. Ideal para usar con marcos de helicópteros y aviones no tripulados o aplicaciones similares donde se requiere fuerte, la construcción precisa.

Especificaciones:
Tema: M3
Longitud: 38 mm
Peso: 1,5 g cada uno

We all know the GoPro Hero as the take-it-anywhere workhorse of an action camera. Boldly going where no action cam has gone before; but how about giving your investment a little more protection from the dust and grime of everyday use?

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

These excellent colored pencils come pre-sharpened and ready to use with 72 vibrant colors. These pencils work smoothly on paper and sharpen easily without the tips breaking off. They are slightly harder than the water color pencils and are best used for sketching and drawing.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

Ultra-Cure Tire Glue has a water-thin viscosity that wicks deep into the bead of the tire and cures in a matter of a few seconds. The tire bead must be tight fitting and should be held together while you apply the CA around the edges of the seam.

Front Sway Bar Set (silver/blue/black) - Basher SaberTooth 1/8 Scale Truggy / Nitro  Circus MT 

Program your Turnigy Marine ESCs with this high-quality program card. Easy to use, this handy program card covers all your basic features and more. Select your Running Mode to ensure your ESCs operate forwards or backwards. The program card also allows you to choose your motor direction, low voltage protection threshold, timing set and start mode.

The Micro Engineering's rail weathering solution is used to weather nickel silver or brass track and track joiners etc so that they match their weathered Flex-Trak.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

Made of TPU material, this flexible camera mount fits the Foxeer Box Cam and other action cameras. The TPU creates a soft protective layer for the camera and absorbs excess vibrations.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

Keep the adventure going with high-quality spare parts for your TR-4. The replacement front C hubs are made of aluminum and are an excellent spare part to have handy.

This Mini Vibrating Cleaning set is perfect for removing grease, dust, and other contaminants from small objects. Ideal for bearings, gears, springs, shafts, jewelry, watch parts, and even small precision instruments.

Furious FPV is very quickly earning a reputation for producing high quality FPV products. Their build quality is excellent and the Poker Chip Antenna is no exception. The Poker Chip patch antenna is small and light with a 10dBi gain and is a perfect match to the Furious FPV Achilles Diversity Receiver Module. So if you are looking for a new antenna for your FPV goggles then look no further than the Furious FPV Poker Chip. See the attached manual for the radiation pattern and the S-Parameters.

This lens hood for the Mavic 2 very effectively suppresses lens flare, stray light entering the lens and also protects the gimbal from accidental damage. The "U" shaped design with extended shade minimizes vignetting (reduction of an image's brightness or saturation) and undesired color effects. The lens hood is made of high quality tough ABS plastic for durability and is supplied in a gray color that compliments the drone itself. The lens hood is quick and easy to install due to the quick mount design.

Engineered to be up to 10 times tougher than normal PLA, eSUN PLA+ has much higher interlayer bonding strength and is 100% FDA approved. The extra strength makes the filament perfect for hobby projects, including 3D printing spare parts and sculptural designs.

There is nothing like the sound of a 12 blade EDF. These are made from strong composite materials.