Área de Liquidación

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

A strong, flexible, transparent fuel tank that is suitable for most types of RC models. The fuel tank includes a machined metal cap with fuel feed, a flexible fuel feed pipe with clunk weight, and 2 factory-installed machined metal 90° hose attachment nipples. One of these is for filling the tank, and the other is used for pressure or venting. Each fuel tank comes with a Turnigy sticker that includes the capacity of the tank, this can be attached to the tank in a convenient position to remind you of its size. The fuel tank is suitable for use with both gas and nitro fuels.

A replacement crankshaft set for the Turnigy TP10 10cc gas engine. This set includes the crankshaft, conrod, prop-driver woodruff key, and prop nut.

A replacement crankcase set for the Turnigy TP10 10cc gas engine, this set includes the crankcase, gasket, and 2 x screws.

A replacement prop driver set for the Turnigy TP10 10cc gas engine. This set includes the prop driver with inset magnet, prop washer, and woodruff key.

A replacement crankcase for the Turnigy TP26 26cc gas engine.

Una cinta de doble cara de alta calidad que es perfecta para asegurar servos, receptores y muchos otros elementos en sus modelos. Está fabricada con espuma de polietileno que absorbe los golpes con un adhesivo acrílico fuerte aplicado en ambos lados, esta espuma de PE es perfecta para aislar los componentes electrónicos sensibles de las vibraciones. Otras características de la cinta son que es resistente al agua, resistente a la temperatura y tiene protección UV.

Accurately drill your propellers for your TP 35cc gas engine with this easy-to-use drilling jig. The jig is CNC machined from aluminum stock and is supplied with a clamping screw to hold the propeller secure whilst drilling.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

El cable adaptador ToolkitRC SC100 se utiliza para alimentar cargadores de batería de bajo voltaje u otros dispositivos con un conector de entrada XT60 desde una fuente de alimentación USB-C de hasta 100 W.

Especificaciones:
Tipo: Cable de protocolo ToolkitRC SC100 XT60~USB-C
Entrada: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Voltaje de salida: 5 ~ 20 V máx.
Corriente de salida: 5A máx.
Conector de salida: XT60
Longitud: 50cm
Peso: 35g

A replacement aluminum alloy rudder support set for the Aquaholic V3 brushless racing boat.

A replacement coupler for connecting the motor to the 4mm flexi-shaft that will fit either the Aquaholic V2 or the V3 brushless racing boat.

Nylon Y-Joint (5pcs / bolsa)

tamaño: D4xΦ2xL23mm

Alu Tren de rodaje (1 par / bolsa)

Tamaño: 255mm
Peso: 108 g / par

30x9 nylon horquilla de M3 M3 Perno (5pcs / bolsa)

Peso: 1 g (cada uno)

6-32 tuercas de seguridad (bolsa de 100pc)

Las articulaciones de bola Heli (sin bolas) (6pcs / bag)

Tamaño: Enlace (largo) de 2,0 mm

El comprobador de paso de helicópteros HobbyKing se hace a partir de ultra rígida placa de fibra de vidrio y cuenta con rodamientos de bolas duales para garantizar mediciones precisas en todo momento. Este comprobador de paso se suministra en forma de kit para mantener los costos de producción que significa que podemos pasar los ahorros a usted!

Especificaciones:
Medición: +/- 20 grados
Tamaño: 145mm x 105mm
Anchura máxima de la hoja: 80 mm

Nota: Una guía de montaje se puede encontrar en la pestaña Archivos continuación.

Adaptador de hélice (Collet Tipo) 4MM

Especulación:
Eje del Motor: 4 mm
Del eje de propulsión: 6mm
Prop Longitud del eje: 24mm
Peso: 14.2 gramos

PA45 tubo (10pcs / bag)

Utilice este adaptador para convertir un cable de carga XT-60 para la carga de baterías JST equipada.

Tuerca de latón para Spinners M5x0,8-M3

Tuerca de latón para Spinners M10x1-M4 (1 unidad)

Tuerca de latón para Spinners 1 / 4x28-M5

adaptador de hélice.

Para adaptarse;
8 mm del eje del motor.
10mm Eje de la hélice.
adaptador de la aleación con el tornillo de presión y el cono final de la aleación.

Reemplazo Piñón 3 mm - 24T / 0,4 M

5X3 Hélices (5 x / Bolsa)