Stromversorgung und Verbrenner

This optional magnetic release servo for the Durafly Me-163b V2 allows you to determine when to release the take-off dolly, rather than rely on gravity. It is particularly beneficial if you operate your Me-163b off of a bumpy strip where the model may prematurely jump off of the dolly. It is simple and straightforward to install, and the servo lead is normally plugged into the assigned retract socket of your receiver. The unit is supplied with a magnet which needs to be glued into the top of the take-off dolly.

Please note:  This option part is also suitable for earlier versions of the Durafly Me-163.

The BMS-622DMG digital servo is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. Being digital, the quoted torque is not only when the servo is moving, but also the holding power when the servo arm is stationary and under load. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a silver anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-622DMG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-662MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.2kg and an excellent speed of 0.17 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a red anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-662MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-632MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.6kg and an excellent speed of 0.15 sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-632MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-622MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-622MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-380MAX is perfect for sailplanes, electric-powered gliders, small electric cars, and also as a wing servo as it is only 13mm wide. The servo has an impressive output torque of 4.7kg and an excellent speed of 0.14sec when using a 6V power source. The gear train has helical metal gears, and the ball-raced output shaft has a 25-tooth spline identical to Futaba specs. The BMS-380MAX is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The GS2010MG is a fast (0.10sec), high torque (23.5kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2010MG
Torque@5V: 21kg
Torque@6.8V: 23.5kg
Speed@5V: 0.12sec/60°
Speed@6.8V: 0.10sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3009MG is a fast (0.09sec), high torque (38kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3009MG
Torque@5V: 28.5kg
Torque@6.8V: 38kg
Speed@5V: 0.11sec/60°
Speed@6.8V: 0.09sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2505MG is a fast (0.05sec), high torque (39kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2505MG
Torque@5V: 26kg
Torque@8.4V: 39kg
Speed@5V: 0.10sec/60°
Speed@8.4V: 0.05sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3508MG is a fast (0.08sec), high torque (45kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3508MG
Torque@5V: 31kg
Torque@8.4V: 45kg
Speed@5V: 0.14sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2508MG is a fast (0.08sec), high torque (25kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD2508MG
Torque@6V: 18kg
Torque@8.4V: 25kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3511MG is a quick (0.11sec), high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3511MG
Torque@6V: 28kg
Torque@8.4V: 35kg
Speed@6V: 0.20sec/60°
Speed@8.4V: 0.11sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GC3507MG is a very fast (0.07sec), high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC3507MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.07sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GC4509MG is a very fast (0.09sec), high torque (45kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC4509MG
Torque@6V: 35kg
Torque@8.4V: 45kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.09sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GB3506MG is a very fast (0.06sec), brushless, high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No:  GB3506MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.06sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Brushless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GD2508MG is a fast (0.08sec), high torque (25kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.  The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD2508MG
Torque@6V: 18kg
Torque@8.4V: 25kg
Speed@5V: 0.13sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3511MG is a fast (0.11sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3511MG
Torque@6V: 28kg
Torque@8.4V: 35kg
Speed@6V: 0.20sec/60°
Speed@8.4V: 0.11sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3507MG is a fast (0.07sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3507MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.07sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GC4509MG is a fast (0.09sec), very high torque (45kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC4509MG
Torque@6V: 35kg
Torque@8.4V: 45kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.09sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GB3506MG is a fast (0.06sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GB3506MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.06sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GB4508MG is a fast (0.08sec), very high torque (45kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GB4508MG
Torque@6V: 34kg
Torque@8.4V: 45kg
Speed@6V: 0.12sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Brushless 
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

A powerful high torque (23.5kg), metal-geared standard size servo with CNC machined center case and a rotation of 180°,  supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2010MG
Torque@5V: 21kg
Torque@6.8V: 23.5kg
Speed@5V: 0.12sec/60°
Speed@6.8V: 0.10sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The G3009MG is a very powerful high torque (38kg), metal-geared standard size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: G3009MG
Torque@5V: 28.5kg
Torque@6.8V: 38kg
Speed@5V: 0.11sec/60°
Speed@6.8V: 0.09sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2505MG is a very very fast (0.05sec), powerful high torque (39kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2505MG
Torque@5V: 26kg
Torque@8.4V: 39kg
Speed@5V: 0.10sec/60°
Speed@8.4V: 0.05sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3508MG is a fast (0.08sec), extremely powerful high torque (45kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3508MG
Torque@5V: 31kg
Torque@8.4V: 45kg
Speed@5V: 0.14sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

A replacement standard rotation 9g metal geared servo with 100mm servo lead for XFLY models.

A replacement standard rotation 9g metal geared servo with 200mm servo lead for XFLY models.

A replacement reverse rotation 9g metal geared servo with 200mm servo lead for XFLY models.

Description:
Item NO.: CYS-S3019 MG
Description : 17G Digital servo with metal gear for airplane
Size : 37.66*13.3*33.8MM
Torque : 3.0Kg.cm ~ 3.4Kg.cm
Speed : 0.13sec ~ 0.09sec/60 degree
Voltage : 6.0Volts ~7.4Volts
Weight : 23± 1 g

A replacement 13g metal-geared servo for the Avios Kobuz Sports-Scale Aerobatic Glider. Used for the ailerons, rudder, and elevator controls.

A replacement 9g metal-geared flap servo for the Avios Kobuz Sports-Scale Aerobatic Glider. 

The 9iMOD BLS-HV20KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV20KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than RC cars including robotics, etc.

The 9iMOD BLS-HV30KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.075sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV30KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.