Stromversorgung und Verbrenner

Corona DS538HV Digitale Metal Gear Servo 8kg / 0.12sec / 58g

Modell: DS538HV
Betriebsspannung: 6.0V / 7.4V
Betriebsstrom: 300mA / 400mA
Betriebsgeschwindigkeit: 0.13sec.60º / 0.12sec.60º
Stall Drehmoment: 7kg.cm / 8kg.cm
Größe: 20X40X38.5mm
Gewicht: 58g
Totband: ≤3uSec
Betriebs Reisen: 40º / der einen Seite Puls reisen 400us
Potentiometer: 5 Schieber / Indirekt - Laufwerk
Kugellager: MR106
Getriebe: Metall
Stecker Draht: 300mm
Betriebstemperaturbereich: -20 ° C + 60c

Corona DS558HV Digitale Metal Gear Servo 14kg / 58g / 0,18 Sec

Modell: DS558MG
Betriebsspannung: 6.0V / 7.4V
Betriebsstrom: 300mA / 400mA
Betriebsgeschwindigkeit: 0.20sec.60º / 0.18sec.60º
Stall Drehmoment: 12kg.cm / 14kg.cm
Größe: 20X40X38.5mm
Gewicht: 58g
Totband: ≤3uSec
Betriebs Reisen: 40º / der einen Seite Puls reisen 400us
Potentiometer: 5 Schieber / Direct Drive
Kugellager: MR106
Getriebe: Metall
Stecker Draht: 300mm
Betriebstemperaturbereich: -20 ° C + 60c

Corona DS-239MG Digitale dünne Flügel Servo (Metal Gear) 4.6kg / 0.15sec / 22g

Modell: DS-239MG
Betriebsspannung: 4.8V / 6.0V
Betriebsstrom: 300mA / 400mA
Betriebsgeschwindigkeit: 0.15sec.60º / 0.14sec.60º
Stall Drehmoment: 4.0kg.cm / 4.6kg.cm
Größe: 30X10X34.5mm
Gewicht: 22 g
Totband: ≤3uSec
Betriebs Reisen: 40º / der einen Seite Puls reisen 400us
Potentiometer: 3 Schieber / Direct Drive
Kugellager: MR85x2
Getriebe: Metall
Stecker Draht: 215mm
Betriebstemperaturbereich: -20 ° C + 60c

Corona CS-239MG Schlank-Wing Analog Servo 4.6kg / 0.14sec / 22g


Spec.
Modell: CS-239MG
Betriebsspannung: 4.8V / 6.0V
Betriebsstrom: 300mA / 400mA
Betriebsgeschwindigkeit: 0.15sec.60º / 0.14sec.60º
Stall Drehmoment: 4kg.cm /4.6kg.cm
Größe: 30x10x34mm
Gewicht: 22 g
Totband: ≤5uSec
Betriebs Reisen: 40º / der einen Seite Puls reisen 400us
Potentiometer: 3 Schieber / Indirekt - Laufwerk
Getriebe: Metall
Stecker Draht: 215mm
Betriebstemperaturbereich: -20 ° C + 60c

Corona CS-239HV Analog dünne Flügel Servo (Metal Gear) 4.6kg / .13sec / 22g

Modell: CS-239HV
Betriebsspannung: 6.0V / 7.4V
Betriebsstrom: 300mA / 400mA
Betriebsgeschwindigkeit: 0.14sec.60º / 0.13sec.60º
Stall Drehmoment: 4.0kg.cm / 4.6kg.cm
Größe: 30X10X34.5mm
Gewicht: 22 g
Totband: ≤5uSec
Betriebs Reisen: 40º / der einen Seite Puls reisen 400us
Potentiometer: 3 Schieber / Direct Drive
Kugellager: MR85x2
Getriebe: Metall
Stecker Draht: 215mm
Betriebstemperaturbereich: -20 ° C + 60c

Corona DS-239HV Digitale dünne Flügel Servo (Metal Gear) 4.6kg / .13sec / 22g

Modell: DS-239HV
Betriebsspannung: 6.0V / 7.4V
Betriebsstrom: 300mA / 400mA
Betriebsgeschwindigkeit: 0.14sec.60º / 0.13sec.60º
Stall Drehmoment: 4.0kg.cm / 4.6kg.cm
Größe: 30x10x34mm
Gewicht: 22 g
Totband: ≤3uSec
Betriebs Reisen: 40º / der einen Seite Puls reisen 400us
Potentiometer: 3 Schieber / Direct Drive
Kugellager: MR85x2
Getriebe: Metall
Stecker Draht: 215mm
Betriebstemperaturbereich: -20 ° C + 60c

HXT900, eines der bekanntesten und preisgünstigsten Mikroservos auf dem Markt. Wird von Bastlern weltweit verwendet. Das HXT900 ist das vertrauenswürdigste Low-Cost 9g Servo.

Eigenschaften:
• Teflonbuchse
• 25cm Draht
• Kernloser Motor
• Servoarme & Schraube enthalten

Spezifikationen:
Größe : 21x12x22mm / 0.74x0.42x0.78 Zoll
Spannung: 3V ~ 6V
Gewicht: 9.8g / 0.39oz
Geschwindigkeit: 0.12 Sek./60 (4.8V)
Drehmoment : 1.6kg-cm
Arbeitstemperatur: -30C~60C
Zahnräder: Nylon Weiß Typ

WARNUNG
Ähnlich aussehende Servos finden Sie bei eBay und anderen Drittanbietern. Seien Sie jedoch gewarnt, sie enthalten keine taiwanesischen/japanischen Komponenten. HexTronik (die Hersteller dieser Servos) haben zwei Standards, einen für den lokalen Verkauf und den anderen für Exportqualität mit importierten Steckern und Harzzahnrädern aus Taiwan und Japan. Unsere HXT500 und HXT900 sind nur für den Export und nicht für den Inlandsmarkt bestimmt. Sie werden nirgendwo die gleiche Qualität für weniger Servos finden!

Torque Rate: 10KG
Speed: .16sec/60deg
Input: 5~7v
Type: Digital
Gearing: Metal
Spline Count: 25
Weight: 55g
Size: 40.7 x 19.7 x 42.9mm

Turnigy TGY-811 wurde für Segelflugzeuge und Composite-EDFs entwickelt - niedrige Profilleistung, präzisere Bewegung und niedrige elektrische Impedanz. Dieses flache Servo ist auch eine gute Wahl für Einfahrgetriebe sowie dünne Flügelsteuerflächen.

Turnigy TGY-813 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

Power HD servos are reknown for build quality and reliability, the TR-4 micro digital waterproof servo is no exception. This servo is perfect for smaller models such as crawlers, buggies, boats and even water/float planes where waterproofing is necessary. The case is sealed with rubber gaskets and O rings and the gear train is metal except for one sacrificial plastic gear. This helps stop permanent damage being done to the servo in the case of a really hard knock. The servo is supplied with 2 x single arm output horns and an M3 servo horn screw.

This optional magnetic release servo for the Durafly Me-163b V2 allows you to determine when to release the take-off dolly, rather than rely on gravity. It is particularly beneficial if you operate your Me-163b off of a bumpy strip where the model may prematurely jump off of the dolly. It is simple and straightforward to install, and the servo lead is normally plugged into the assigned retract socket of your receiver. The unit is supplied with a magnet which needs to be glued into the top of the take-off dolly.

Please note:  This option part is also suitable for earlier versions of the Durafly Me-163.

The BMS-622DMG digital servo is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. Being digital, the quoted torque is not only when the servo is moving, but also the holding power when the servo arm is stationary and under load. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a silver anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-622DMG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-662MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.2kg and an excellent speed of 0.17 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a red anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-662MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-632MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.6kg and an excellent speed of 0.15 sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-632MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-622MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-622MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-380MAX is perfect for sailplanes, electric-powered gliders, small electric cars, and also as a wing servo as it is only 13mm wide. The servo has an impressive output torque of 4.7kg and an excellent speed of 0.14sec when using a 6V power source. The gear train has helical metal gears, and the ball-raced output shaft has a 25-tooth spline identical to Futaba specs. The BMS-380MAX is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The GS2010MG is a fast (0.10sec), high torque (23.5kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2010MG
Torque@5V: 21kg
Torque@6.8V: 23.5kg
Speed@5V: 0.12sec/60°
Speed@6.8V: 0.10sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3009MG is a fast (0.09sec), high torque (38kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3009MG
Torque@5V: 28.5kg
Torque@6.8V: 38kg
Speed@5V: 0.11sec/60°
Speed@6.8V: 0.09sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2505MG is a fast (0.05sec), high torque (39kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2505MG
Torque@5V: 26kg
Torque@8.4V: 39kg
Speed@5V: 0.10sec/60°
Speed@8.4V: 0.05sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3508MG is a fast (0.08sec), high torque (45kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3508MG
Torque@5V: 31kg
Torque@8.4V: 45kg
Speed@5V: 0.14sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2508MG is a fast (0.08sec), high torque (25kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD2508MG
Torque@6V: 18kg
Torque@8.4V: 25kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3511MG is a quick (0.11sec), high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3511MG
Torque@6V: 28kg
Torque@8.4V: 35kg
Speed@6V: 0.20sec/60°
Speed@8.4V: 0.11sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GC3507MG is a very fast (0.07sec), high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC3507MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.07sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GC4509MG is a very fast (0.09sec), high torque (45kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC4509MG
Torque@6V: 35kg
Torque@8.4V: 45kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.09sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GB3506MG is a very fast (0.06sec), brushless, high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No:  GB3506MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.06sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Brushless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GD2508MG is a fast (0.08sec), high torque (25kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.  The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD2508MG
Torque@6V: 18kg
Torque@8.4V: 25kg
Speed@5V: 0.13sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3511MG is a fast (0.11sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3511MG
Torque@6V: 28kg
Torque@8.4V: 35kg
Speed@6V: 0.20sec/60°
Speed@8.4V: 0.11sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3507MG is a fast (0.07sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3507MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.07sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g