EDF und Turbinen Antriebe

Eine hohe Schub- und gut gestaltete Elektro Impeller-Einheit für Hochleistungsanwendungen, die 10 Messeranordnung für einen ruhigen Lüftereinheit mit einer erstaunlichen Ton macht, ist dies der nächste Sie jemals an den Klang einer Turbine erhalten!

Hergestellt mit 30% FRP und dynamisch ausgewuchtet, für die Verwendung mit Hochleistungs-28mm EDF Motoren, entweder 3.17m oder 4 mm Welle. Für die besten Ergebnisse aus dieser Fan, empfehlen wir die Turnigy 2855 EDF-Motoren.

Specs:
Außendurchmesser: 72mm
Rotordurchmesser: 68mm Klinge
Meterial: kohlefaserverstärktem Nylon Rotor
Schaft - Adapter Motor: 3,17 mm oder 4 mm
Max RPM: 45000 RPM

Sonic 64 EDF - Flügel 1230mm - Ersatz EDF w / Motor

spec
Motor: 5000kv
Lüftereinheit: 64mm
Spannung: 11.1V Lipo Akku
ESC erforderlich: 40amp

Einführung in unsere Dr. Mad Thrust Hochleistungs - EDF - Serie. Die Dr. wurde hart bei der Arbeit Sie MAD Macht EDF Systeme mit ausgezeichneter Qualität und hoher Leistung zu einem Preis zu bringen , die etwas Geld in der Tasche verlassen wird.

Die Dr. Mad Thrust EDF Serie sind vormontiert und dynamisch ausgewuchtet so dass sie leicht ohne Einheit Montage passen, erforderlich. Neben der hohen Leistung, diese Fans eine hervorragende Kühlung haben und laufen so reibungslos, der Klang ist erstaunlich. Es gibt auch kein Gehäuse Verzerrung im Gegensatz zu Kunststoff-Fans. Diese hochwertige, leistungsstarke Lüfter ist eine gute Möglichkeit , Ihren 40mm EDF Strahl in eine Beschleunigung Rakete zu machen!

Diese 40mm, 8-Klinge-Combo mit dem inrunner Motor wurde für seinen Rekord brechen Electrolyte Micro EDF Sport-Jet von Dr. Bret Becker, entwickelt und ist in der Lage, das Modell über die 100 Stundenmeilen Barriere drücken. Das ARF-Modell wird in Kürze von Hobbyking verfügbar sein, aber man kann sein Rezept für die Strom früh für alle Ihre Mikro EEF-Projekte erhalten!

Dr. Mad EDF Serie Thrust - genau die richtige pr esc ription für Ihr Modell!

Eigenschaften:
• Vormontiert
• Werks dynamisch ausgewuchtet
• Hohe Leistung mit überragender Kühlung
• Hohe Bauqualität
• Vollständig gewartet
• Schnelle passen
• Kein Gehäuse Verzerrung

Specs:
Rotorgröße: 40 mm, 8 Blades
Gewicht: 63g
MAX RPM: 96000
MAX Power (10sec.): 330 Watt
Dauerleistung: 290 Watt
Motorgröße: B2225
Kv: 8000
Spannung: 11,1 V
Strom: 26A
Schubkraft Bis zu : 400g
Innendurchmesser: 41mm
Außendurchmesser: 43mm
Motor Anschlüsse: 2 mm Kugel

If you're looking for high performance and that realistic jet sound in your latest 64mm sized EDF model, then look no further than this high quality 12 bladed unit.
The 12 blade fan moves a greater volume of air to make for a quiet unit with an amazing sound, this is the closest you will ever get to the sound of a turbine without actually buying one!

Molded from 30% FRP with integral mounting lugs, the unit is for use with 20mm EDF motors or those with a 20mm extension and has adapters to suit 3.17 and 4mm motor shafts.

For the best results from this and any ducted fan unit we strongly recommend checking the balance of the complete assembly and eliminating any sources of vibration.

Specs:
Outside diameter: 66.7mm (78mm with intake lip)
Shroud length: 45mm
Rotor diameter: 64mm 
Material: Carbon fiber reinforced Nylon rotor
Motor dia: 20.5mm max
Shaft adaptor to motor: 3.17mm or 4mm
Recommended motors: 3300Kv motor for 3s/2800Kv motor for 4s
Max RPM: 38000 RPM
Max power: 1300W
Weight: 43g w/intake lip

Included:
64mm 12-Blade EDF Unit
Spinner
Intake lip
3.17 & 4.0mm shaft adapters
Retaining nut & washer

Always use a Watt meter to ensure that your motor and ESC are running within specs, as 10/12 blade fans draw more current than conventional types.

If you're looking for high performance and that realistic jet sound in your latest 70mm sized EDF model, then look no further than this high quality 12 bladed unit.

The Dr. Mad Thrust EDF series are pre-assembled and dynamically balanced making them easy to fit, with no unit assembly required. As well as high power, these fans have excellent cooling and run so smoothly, the sound is amazing. There is also no housing distortion, unlike plastic fans. This high quality, powerful fan is a great way to upgrade your 70mm EDF jet to a speeding missile in around an hour!

The Dr. Mad Thrust EDF series are pre-assembled and dynamically balanced making them easy to fit, with no unit assembly required. As well as high power, these fans have excellent cooling and run so smoothly, the sound is amazing. There is also no housing distortion, unlike plastic fans. This high quality, powerful fan is a great way to upgrade your 70mm EDF jet to a speeding missile in around an hour!

The Dr. Mad Thrust EDF series are pre-assembled and dynamically balanced making them easy to fit, with no unit assembly required. As well as high power, these fans have excellent cooling and run so smoothly, the sound is amazing. There is also no housing distortion, unlike plastic fans. This high quality, powerful fan is a great way to upgrade your 70mm EDF jet to a speeding missile in around an hour!

There is nothing like the sound of a 12 blade EDF. These are made from strong composite materials.

There is nothing like the sound of a 12 blade EDF. These are made from strong composite materials.

There is nothing like the sound of an 11 blade EDF. These are made from strong composite materials.

There is nothing like the sound of an 11 blade EDF. These are made from strong composite materials.

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-16 Fighting Falcon 550mm.

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-18 Super Hornet 588mm.

A replacement 64mm 12-blade EDF unit for the H-King Viper 64 EDF Jet complete with a 2840-2300KV brushless motor.

This heavy-duty portable stand is perfect for larger model airplanes, including jets. It makes life so much easier when working on your models, assembling them, or checking retracts. The length of each leg is fixed, but the stance can be changed by changing the angle of the legs. This will increase or decrease the height and also the distance between the supports on the top of each leg. The stand is made from heavy-duty materia and will handle models weighing up to an incredible 50kg.

This high-quality all-metal fan unit uses the latest technology and high-grade aluminum alloy to ensure a powerful, smooth-running unit. It is built to the highest of standards, and each blade is precision made to generate the best airflow, and to a rigorous 8-hour fatigue test before installation.

The highly rigid structure is capable of running at a very high RPM which produces an extremely high efflux velocity for maximum speed and efficiency. The design includes an anti-disintegrating safety feature that will stop a blade from flying out of the shroud in the unlikely case of failure. The shroud itself acts as a heatsink for the motor and each unit has been dynamically balanced to ensure smooth running and a long lifespan for both the fan unit and the motor.

A replacement 70mm fan unit with 2860-2100KV inrunner brushless motor for the 1042mm H-King FLYCAT V2 70mm 12-Blade EDF Jet.

A replacement 70mm fan unit for the 1042mm H-King FLYCAT V2 70mm 12-Blade EDF Jet.