Flugzeuge
HobbyKing hat größte Auswahl an RC Flugzeugen weltweit. Du kannst auswählen zwischen den meistverkauften Herstellern, bspw. Durafly, Avios und viele andere. Hier findest Du das richtige Flugzeug für jeden Geldbeutel.
-
H-King Yak-11 Steadfast Single-Seat Racer Replacement Wing Set (1pr)110,79 €A pair of replacement wings for the H-King Yak-11 Steadfast Single-Seat Racer with ailerons, flaps, and quick-connect servo connectors.
Learn More
Please note: The servos are not included. -
H-King Yak-11 Steadfast Single-Seat Racer Replacement Vertical Stabilizer w/Rudder27,69 €A replacement vertical stabilizer with rudder for the H-King Yak-11 Steadfast Single-Seat Racer.
Learn More -
HobbyKing Hall Cherokee V2 1700mm Glider – Replacement Brushless Motor19,38 €Replacement 2026-2300KV brushless motor for the retractable propulsion system of the HobbyKing Hall Cherokee V2 1700mm Glider.
Learn More -
-
-
-
Albatross HU-16 V3 PNP- Light Housing Set2,76 €Albatross HU-16 V3 PNP- Light Housing Set
Learn More -
H-King KitFox 1100mm/1250mm - Replacement 40A AeroStar ESC18,46 €A replacement 40A ESC for the H-King KitFox 1100mm/1250mm.
Learn More -
H-King Viper 64 EDF Jet Replacement Fuselage w/Decals59,08 €A replacement fuselage for the H-King Viper 64 EDF Jet complete with decals, and rudder.
Learn More -
H-King Viper 64 EDF Jet Replacement Wing Set w/DecalsSpecial Price 41,11 € Regular Price 48,00 €A replacement wing for the H-King Viper 64 EDF Jet complete with decals, ailerons, and flaps.
Learn More -
Durafly (PNF) Gloster Gladiator Mk1 Doppeldecker EPO 1100mm (43")Special Price 187,15 € Regular Price 207,73 €Das Durafly Gloster Gladiator ist aus starkem EPO-Schaum gefertigt und entspricht den üblichen hohen Standards, die Sie von dieser Reihe von RC-Flugzeugen erwarten. Wie bei den meisten anderen Durafly-Modellen kommt es "Plug N Fly". Dies bedeutet, dass es mit einer einfach zu montierenden Flugzeugzelle, einem leistungsstarken vorinstallierten bürstenlosen 3719-770KV-Motor, Aerostar 40A ESC und 4 vorinstallierten 9-g-Digitalservos geliefert wird. Ein Vinyl-Aufkleberbogen ist im Lieferumfang enthalten, dieser muss während des Bauprozesses angebracht werden, dies gibt Ihnen die Wahl, das silberne Finish als Basis für die Erstellung Ihres eigenen Farbschemas zu verwenden. Sobald das Modell zusammengebaut ist, benötigen Sie nur noch einen 4-Kanal- oder mehr Empfänger Ihrer Wahl und einen 2200 mAh 4S (14,8 V) LiPo-Akku.
Learn More -
XFLY GlaStar V2 1233mm Orange PNP RC plane166,18 €Learn MoreXFly GlaStar 1233mm PNP V2
Description
The V2 version under a new decoration is equipped with a new 40A ESC for 3S or 4S power supply.
The new XFly GlaStar bush/trainer plane is a high performance, durable, all terrain, STOL-capable, high-wing sport model. The GlaStar's impressive flight characteristics and large air-filled shock-absorbing tires makes short takeoffs and landings on any type of surface easy!
The Glasair GlaStar (sometimes Glastar) is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation.
The XFly GlaStar model comes equipped with a magnetic released top hatch compartment to fit 3S 1300-2200mAh batteries which will provide a wide range in performance and flight times. The GlaStar is a perfect choice for a wide range of pilots to enjoy flight after flight!
Features
- A sport STOL plane that can be enjoyed by a wide range of pilots
- Designed with a larger wing to provide a low wing load to deliver short takeoff and landings (STOL)
- Made from lightweight durable composite-reinforced EPO and ABS plastic
- Equipped with a magnetic released top hatch compartment to fit 3S 1300-2200mAh batteries which will provide a wide range in performance and flight times up to 10 minutes
- Digital servos with ball-link equipped linkages deliver crisp and precise control at every speed
- Unique over-sized pair of air-filled pneumatic tires that deliver great bounce and rebound resiliency. These wheels make hard or uneven terrain landings/takeoffs possible
Technical Specifications
- Wingspan: 1233mm / 48.5in
- Length: 945mm / 37.2in
- Wing load: 49g/dm2
- Wing Area: 24.5dm2
- Flying weight: around 1200g
- Ailerons: Yes
- Elevator: Yes
- Rudder: Yes
- Flaps: No
- Fixed Landing Gear
- Recommended Radio: 4 channel
- Recommended environment: Outdoor
- Flying time: Approx. 10 minutes
- Takeoff/Landing: runway / short grass or dirty field
- Mounting duration: around 15 minutes
Content
- XFly GlaStar 1233mm PNP
- Propeller: 10*6 2 blade
- Motor: 1x Brushless Outrunner 3136-KV1000
- ECS: 1x 40A with EC3 connector
- Servos: 4x9g Digital
Required
- 4-Channel radio transmitter
- 4-Channel receiver
- 3-Cell 11.1V 1300-2200mAh with EC3 connector
- Or 4-Cell 14.8V 1800-2600mAh with EC3 connector
- 3-Cell Or 4-Cell compatible battery charger
-
XFLY Tasman 1500mm Orange PNP RC planeSpecial Price 207,73 € Regular Price 230,82 €Learn MoreXFly Tasman 1500mm PNP
Description
The XFly 1500mm (59.1'') Tasman is a STOL-capable, high-wing airplane featuring sporty flight and aerobatic 3D performance. The Tasman's impressive flight characteristics and large air-filled shock-absorbing tires make short takeoffs and aggressive landings on any type of surface easy. The 4S-compatible brushless motor, 40A ESC, 2-blade propeller and a 4S Lipo battery proved to be the optimum setup for power and duration, allowing the plane to hover, roll, loop and fly inverted easily, which makes it highly recommended as an advanced trainer.
Factory-installed LED navigation lights, plus operational flaps, are functional scale features that take your experience to another level. The Tasman comes equipped with a latch-type top hatch to fit 4S 2200-3300mah batteries for a wide range in performance and flight times.
If you are looking for an advanced trainer with STOL capabilities, sport performance and simple aerobatic 3D capabilities, look no further than the XFly Tasman!
Features
- Lightweight yet durable composite-reinforced EPO
- Larger wing and functional flaps delivering short takeoff and landings (STOL) plus 3D capabilities
- Unique oversized pair of air-filled tires that deliver great bounce and rebound resiliency. These wheels make hard or uneven terrain landings/takeoffs possible
- Realistic-looking LED navigation lights
- Latch-type top hatch to fit 4S 2200-3300mAh batteries for a wide range in performance and flight times
Technical Specifications
- Wingspan:?1500mm / 59in
- Length:?1150mm / 45in
- Wing load:?50g/dm2
- Wing Area:?36dm2
- Flying weight: around?1800g
- Motor:?3536-KV900
- ESC:?40A
- Servo: 9g digital servos x 6
- CG: 60mm from the leading edge
- Recommended battery: 4S 2200-3300mah
- Landing gear:?Fixed main landing gear, steerable rear gear
- Ailerons:?Yes
- Elevator:?Yes
- Rudder:?Yes
- LED: Yes
- Flaps:?Yes
- Recommended Radio: 5 channel
- Recommended environment:?Outdoor
- Flying time: Approx. 6-10 minutes
- Mounting duration: around 20?minutes
Content
- XFly Tasman 1500mm PNP?(Bush/Trainer)
- Propeller:?2 blade
- Motor:?1x Brushless Outrunner?3536-KV900
- ECS:?40A
- Servos:?9g digital servos x 6
Required
- 5-Channel radio transmitter
- 5-Channel receiver
- 4S 2200-3300mah Battery
- 4S Battery charger
-
XFLY Quad 40mm C-17 PNP RC plane276,98 €XFly C-17 Globemaster Quad 40mm EDF PNP
Learn MoreDescription
The XFly Globemaster C-17 brings a faithful transport-aircraft presence to the EDF class with a 1200mm wingspan and a scale four-engine layout. Its factory pre-installed power system combines four 40mm fans driven by 1413-KV5000 brushless motors and four 20A ESCs, delivering ample thrust for vertical climbs, rolls, loops and confident circuit flying on a suitable 4S LiPo.
Landing gears with dual wheels provide strong ground handling, helping maintain accuracy and stability during taxi, take-off and landing. A centrally positioned battery bay makes it straightforward to achieve a proper centre of gravity, while the model’s convenient size allows flying at large parks, sports fields or traditional RC flying sites. Supplied fully painted with decals applied and designed for quick assembly, it transports easily without disassembly and can fit fully assembled in most vehicles. Typical flight times of 3–8 minutes are achievable with sensible throttle management and a recommended 4S 2600–4000mAh LiPo battery. Supplied without transmitter, receiver or battery.
Features
- Four efficient 40mm EDF power configuration delivering an abundance of thrust for vertical climbs, rolls, loops and other maneuvers
- Landing gears with dual wheels designed for grip ability, accuracy and stability
- Battery compartment reasonably designed to easily achieve a proper C.G.
- Extended flight time of 3-8 mins when using recommended 4S 2600-4000mAh LiPo battery
- Quick and easy assembly
- Full painted with decal pre-applied
Technical Specifications
- Wingspan: 1200mm/47in
- Length: 1150mm/45in
- Wing loading: 97g/dm2
- Wing area: 16dm2
- Weight in flying: 1560g
- Motor: 1413-KV5000 *4
- Controller: 20A *4
- Servos: 9g servo*7
- CG: 145mm from the leading edge
- Recommended battery: 4S 2600-4000mAh
- Landing gear: Landing gears with dual wheels
- Ailerons: Yes
- Elevator: Yes
- Throttle: Yes
- Rudder/Steering: Yes
- Flaps: Yes
- Retractable landing gear: No
- Radio: 5 channels
- Recommended environment: Outdoor
- Flight time: approximately 3-8 minutes
- Assembly time: about 15 minutes
- Age: 14 years and up
- Level: Intermediate
Content
- XFly C-17 Globemaster Quad 40mm EDF PNP
- Motor: 1413-KV5000 *4
- ECS: 20A *4
- Servos: 9g servo*7
Required
- 5-Channel radio transmitter
- 5-Channel receiver
- 4S 2600-4000mAh
- 4S Battery charger
-
Avios C-130 Paint Blue (20ml)5,17 €These Avios touch-up paints are designed specifically for your Avios C-130.
Learn More -
Replacement Std/Reverse 3-Blade 10x8 Propeller Set (2pcs) for AVIOS Albatross and AVIOS BushMule10,15 €These 3 bladed propellers are a direct replacement for the AVIOS Albatross and AVIOS BushMule airplanes.
Learn More -
Durafly Rare Bear Reno Racer 680mm Replacement X-Motor Mount2,76 €A replacement X-motor mount for both color versions of the 680mm Durafly Rare Bear Reno Racer.
Learn More -
-
-
-
HobbyKing® ™ Walrus - Ersatzteil - Horizontale StabiliserSpecial Price 16,39 € Regular Price 19,34 €HobbyKing® ™ Walrus - Ersatzteil - Horizontale Stabiliser
Learn More -
HobbyKing® ™ Walrus - Ersatzteil - Rumpfs19,59 €HobbyKing® ™ Nacht Walrus - Ersatzteil - Rumpfs
Learn More -
HobbyKing® ™ Walrus - Ersatzteil - Flügel Spar4,15 €HobbyKing® ™ Walrus - Ersatzteil - Flügel Spar
Specs:
Learn More
Länge: 300 mm
Durchmesser: 5,5 mm (7,8 mm in der Mitte) -
H-King Voltigeur 1220mm - Replacement Wing Panels30,76 €Need spare parts for your H-King Voltigeur? Use these replacement wing panels to fix your plane.
Learn More -
H-King Voltigeur 1220mm - Replacement Horizontal Stabilizer6,13 €Replace the horizontal stabilizer of your Voltigeur hobby plane with this spare part made of sturdy EPO. Learn More -
H-King Voltigeur 1220mm - Replacement Rudder6,52 €Replace the broken or damaged rudder on your Voltigeur 1220mm plane. Learn More -
Durafly T-28 Marine 1100mm - Rumpf ohne Baldachin33,53 €Durafly T-28 Marine 1100mm - Rumpf ohne Baldachin.
Learn More -
Durafly T-28 Naval 1100mm - Nose Landing Gear without Retract8,30 €Durafly T-28 Naval 1100mm - Nose Landing Gear without Retract
Learn More -
H-King Bixler 1.1 - Ersatzrumpf mit AbziehbildernSpecial Price 15,26 € Regular Price 18,07 €H-King Bixler 1.1 - Ersatzrumpf mit Abziehbildern.
Learn More -
H-King Bixler 1.1 - Replacement Vertical Tail w/Decals4,93 €H-King Bixler 1.1 - Replacement Vertical Tail w/Decals
Learn More -
Durafly SlowPoke - Replacement Canopy with Pilot (Red Scheme)8,22 €Durafly SlowPoke - Replacement Canopy with Pilot (Red Scheme)
Learn More -
Durafly SlowPoke - Replacement Main Wings (Red Scheme)36,17 €Durafly SlowPoke - Replacement Main Wings (Red Scheme)
Learn More -
Durafly SlowPoke - Replacement Horizontal Stabilizer (Red Scheme)9,60 €Durafly SlowPoke - Replacement Horizontal Stabilizer (Red Scheme)
Learn More


Login and Registration Form